Process of Making Gas Stove Spuyer with TU-2A CNC Machine
DOI:
https://doi.org/10.24853/jasat.4.3.87-92Keywords:
CNC Machine Control Computer Machine Work pieceAbstract
The TU-2A CNC machine is a turning machine tool that is controlled by a computer system through data (program input) in the form of letters and numbers. This machine is capable of producing a work piece with a complex shape and high accuracy, as well as the effectiveness of minimum production time. Gas stove nozzle is a form of work piece which in the manufacturing process is required to have a high level of effectiveness with high accuracy. The supporting factors in the manufacturing process are based on the selection of program functions and machining parameters (cutting speed, feeding, feeding speed and proper rotation of the main axis).In the process of making gas stove nozzles using a CNC TU – 2A machine, the parameter values used are cutting speed (Vs) 20 m/min, feeding 0.75 mm/put, feeding speed (s') 281 mm /min and the main axis rotation (n) 375 rpm.So from the parameters used, it is known that the total machining time per component (tm) = 5.4 minutes, the total production cost per component (Cprod) = Rp. 8,572, - and the total production time per component (t prod) = 7.6 minutes. The greater the value of the Dept of cut, feed and feeding speed, the production time and production costs that occur will decrease until they reach t = 2.6% and C = 2.3%.Downloads
References
Dionisius, F., Firdaus, S., Maulana, M. E., Carudi, C., Badruzzaman, B., & Suliono, S. (2020). Characteristic of flame length on spuyer diameter in conventional LPG stove. In IOP Conference Series: Materials Science and Engineering (Vol. 732, No. 1, p. 012088). IOP Publishing.
Pratama, A., Basyirun, B., Atmojo, Y. W., Ramadhan, G. W., & Hidayat, A. R. (2020). Rancang Bangun Kompor (Burner) Berbahan Bakar Oli Bekas. Mekanika: Majalah Ilmiah Mekanika, 19(2), 95-103.
Mahmud, K.H., Yudistirani, S.A., Diniardi, E. and Ramadhan, A.I., 2020. Hardness Analysis of Bearing on Heat Treatment Process. Journal of Applied Sciences and Advanced Technology, 2(3), pp.59-64.
Bruni, S., Goodall, R., Mei, T.X. and Tsunashima, H., 2007. Control and monitoring for railway vehicle dynamics. Vehicle System Dynamics, 45(7-8), pp.743-779.
Almanda, D. and Ramadhan, A.I., 2020. Analysis of the Potential for Savings in Electrical Energy Consumption in Lifts: Case Study in Indonesia. Journal of Applied Sciences and Advanced Technology, 3(1), pp.29-34.
Timoshenko. 1991 “Technoligi of Machine Tools”, 4 th edition. McGraw Hill Book Company, New York.
Yudistirani, S.A., Mahmud, K.H. and Diniardi, E., 2021. Stamping Disability Analysis on Material SPC 270 E. Journal of Applied Sciences and Advanced Technology, 3(3), pp.75-80.
Rahardja, I. B., Daraquthni, Z., & Ramadhan, A. I. (2019). Potential of Palm Oil Solid Waste as Steam Power Fuel (Case Study at XYZ Palm Oil Mill). Journal of Applied Sciences and Advanced Technology, 2(2), 33-38.
Yulianto, D., Nugroho, W. A., & Argo, B. D. (2015). Uji Kinerja Kompor Spiral Tipe Vertikal Dengan Bahan Bakar Minyak Jelantah. Jurnal Keteknikan Pertanian Tropis dan Biosistem, 4(1), 27-32.
Budiprasojo, A., Rofii, A., & Hananto, Y. (2019, December). Alih Teknologi Tepat Guna Kompor Pembakaran Premix Dual Tungku Multi Nosel Untuk Meningkatkan Produksi Industri Rumah Tangga Kue Balok Oma Di Kabupaten Jember. In Prosiding Seminar Pengabdian (Vol. 1, No. 1, pp. 57-61). Politeknik Negeri Jember.
Budiprasojo, A., Hananto, Y., & Rofi’i, A. (2021). Penerapan Teknologi Kompor Pembakaran Premix Dual Tungku Multi Nosel Dalam Upaya Peningkatan Produksi Industri Kue Balok Oma Jember. J-Dinamika: Jurnal Pengabdian Masyarakat, 6(1), 206-211.
Downloads
Published
Issue
Section
License
COPYRIGHT POLICY
The author(s) of an article published in the Journal of Applied Sciences and Advanced Technology (JASAT) retains ownership of the intellectual property rights in work (s).
PUBLISHING RIGHTS
The author(s) of an article published in the Journal of Applied Sciences and Advanced Technology (JASAT) have unrestricted publication rights. The authors give the Journal of Applied Sciences and Advanced Technology (JASAT) the right to publish the article and designate the Faculty of Engineering Universitas Muhammadiyah Jakarta Publishing as the original publisher of the article.
LICENSING POLICY
JASAT is an open-access journal that follows the Creative Commons Non-Commercial 4.0 International License (CC BY-NC 4.0), which states that:
Under this license, the reusers must give appropriate credit, provide a link to the license, and indicate if changes were made. Users may do so in any reasonable manner, but not in any way that suggests the licensor endorses users or their use.
Please take the time to read the whole license agreement (https://creativecommons.org/licenses/by-nc/4.0/). As long as reusers follow the license conditions, the owner cannot withdraw these freedoms. The following components are included under this license:
Attribution: Users must provide appropriate attribution, including a link to the license, and indicate whether or not they made any modifications. Users are free to do so reasonably, but not in a manner that indicates the licensee approves of their usage.
NonCommercial: Users may not use the material for commercial purposes.
_2.png)
1.png)
2.png)
