Analysis Structure and Function Cooling System on Unit D155A-6

Article Sidebar

PDF
Published: Jan 2, 2019
DOI: https://doi.org/10.24853/jasat.1.2.49-52
Keywords:
Repair Over heating Cooling system Unit D155A-6

Main Article Content

Hasan Basri
Universitas Muhammadiyah Jakarta
Anwar Ilmar Ramadhan
Universitas Muhammadiyah Jakarta
http://orcid.org/0000-0002-2443-0051
Ery Diniardi
Universitas Muhammadiyah Jakarta

Abstract

As time went on many problems were encountered in the unit, one of which was the problem experienced by the D155A-6 unit, which was overheating troubleshooting caused by abnormal fan motors. In handling the problem, it is difficult to determine the data of the motor fan. Therefore, an initiative is needed to create tools to help deal with problems that occur. The purpose of this study is the manufacture of adapter tools for measurement of hydraulic pressure fan motors in troubleshooting the overheat engine in D155A-6 units. The results of this study are analyzing the structure and function of the cooling system in troubleshooting the overheat engine in the D155A-6 unit.

Downloads

Download data is not yet available.

Article Details

Issue
Vol. 1 No. 2 (2018): Journal of Applied Sciences and Advanced Technology
Section
Articles

COPYRIGHT POLICY

The author(s) of an article published in the Journal of Applied Sciences and Advanced Technology (JASAT) retains ownership of the intellectual property rights in work (s).

PUBLISHING RIGHTS

The author(s) of an article published in the Journal of Applied Sciences and Advanced Technology (JASAT) have unrestricted publication rights. The authors give the Journal of Applied Sciences and Advanced Technology (JASAT) the right to publish the article and designate the Faculty of Engineering Universitas Muhammadiyah Jakarta Publishing as the original publisher of the article.

LICENSING POLICY
JASAT is an open-access journal that follows the Creative Commons Non-Commercial 4.0 International License (CC BY-NC 4.0), which states that: 


Under this license, the reusers must give appropriate credit, provide a link to the license, and indicate if changes were made. Users may do so in any reasonable manner, but not in any way that suggests the licensor endorses users or their use.
Please take the time to read the whole license agreement (https://creativecommons.org/licenses/by-nc/4.0/). As long as reusers follow the license conditions, the owner cannot withdraw these freedoms. The following components are included under this license:

Attribution: Users must provide appropriate attribution, including a link to the license, and indicate whether or not they made any modifications. Users are free to do so reasonably, but not in a manner that indicates the licensee approves of their usage.

NonCommercial: Users may not use the material for commercial purposes.

Author Biographies

Hasan Basri, Universitas Muhammadiyah Jakarta

Department of Automotive and Heavy Equipment

Anwar Ilmar Ramadhan, Universitas Muhammadiyah Jakarta

Mechanical Engineering

Ery Diniardi, Universitas Muhammadiyah Jakarta

Mechanical Engineering

References

Basri, H.,Rasma, Ramadhan, A.I., Diniardi, E., 2017, Analisa Kerusakan Alternator Semi Konduktor Regulator Pada Charging System Pada Unit Dump Truck 465-5, Prosiding Semnastek

Rasma, Basri, H., Ramadhan, A. I., 2013, Analisa Pengaruh Tekanan Terhadap Steering Control Valve Alat Berat Pada Unit Grader (GD) Tipe 621R-1, Prosiding Seminar Inovasi Teknologi dan Rekayasa Industri 2013

Purwono, H, Rasma, 2017, Analisa Engine Overheat Pada Unit Komatsu Bulldozer D155A-6, Prosiding Semnastek

Part Book, KOMATSU D155A-6. PT. United Tractors Tbk.

Kamsar. Hasbi, Muhammad. Rachman, Aditya, 2016. Analisis Sistem Hidrolik Pengangkat Pada Alat Berat Jenis Wheel Loader Studi Kasus Dinas Pekerjaan Umum Kab. Bombana, DINAMIKA – Jurnal Ilmiah Teknik Mesin,Vol. 1 No. 1.

Mulyanto, S., 2018, Analisa Fan Control Declinepada Unit AlatBerat Bulldozer Komatsu D375-6, DINAMIKA – Jurnal Ilmiah Teknik Mesin, Vol 9 No 2

Basic Competency 1 TC, Hydraulic System. PT. United Tractors Tbk.

Purwono, H, dan Rasma, 2017, Analisa Engine Overheat Pada Unit Komatsu Bulldozer D155A-6, Prosiding Semnastek

Diniardi, E., Ramadhan, A. I., Basri, H., 2014, Analisis Kekuatan Mekanik Dan Struktur Mikro Pada Material Polimer Penyusun Kipas Radiator, Jurnal Teknologi, Vol 6 No 1

Nugrahanto, I., 2016, Analisis Monitoring Pelumas Hidrolik Wheel Loader, Jurnal Ilmiah - VIDYA, Vol. 24 No. 2