NUMERICAL STUDY ON BEHAVIOUR OF COLD-FORMED STEEL UNLIPPED CHANNEL SUBJECT TO AXIAL COMPRESSION
Abstract
Innovation in obtaining construction materials that are efficient and applicable to various conditions is a challenge for researchers. Cold-formed steel is a material breakthrough in construction that has advantages over hot-rolled steel. Many studies have been carried out on Cold-formedsteel subjected to various loadings to examine the behavior and capacities of the sections. This study aims to investigate the behavior and section capacity of cold-formed steel unlipped channels due to axial compression loads. This research begins with conducting a literature study, then carrying out numerical analysis using the finite element method in ABAQUS, numerical test, and calculation of section capacity based on existing research in the literature. The calculation of section capacity is carried out based on SNI 7971-2013 or AS/NZS 4600:2005. The results of the numerical analysis can be seen from the behavior and capacities of the sections of the unlipped channel, the section capacity from the numerical test will be compared with the section capacity obtained from the calculation based on SNI 7971-2013 or AS/NZS 4600.
Keywords
Full Text:
PDFReferences
G.J. Hancock, Design of cold-formed steel structures : to Australian/New Zealand standard AS/NZS 4600:2005, 4th ed., Australian Steel Institute, 2007.
W.-W. Yu, R.A. Laboube, Cold-Formed Steel Design, Fourth Edition, John Wiley & Sons, Inc, New Jersey, 2010.
G.B.G. Ananthi, S. Vishuvardhan, G.M.S. Knight, Experimental, theoretical and numerical study on thin walled steel single and compound channel sections in axial compression, Indian Journal of Engineering & Materials Sciences. 22 (2015) 570–580. https://www.researchgate.net/publication/287808905.
A.D. Martins, D. Camotim, P.B. Dinis, B. Young, Local-Distortional Interaction in Cold-formed Steel Columns: Mechanics, Testing, Numerical Simulation and Design, Structures. 4 (2015) 38–57. https://doi.org/10.1016/j.istruc.2015.10.005.
G.B.G. Ananthi, S. Vishuvardhan, G.M.S. Knight, Experimental, theoretical and numerical study on thin walled steel single and compound channel sections in axial compression, Indian Journal of Engineering & Materials Sciences. 22 (2015) 570–580. https://www.researchgate.net/publication/287808905.
G. Beulah, G. Ananthi, Performance of plain and lipped cold-formed channel sections in axial compression, International Journal of Earth Sciences and Engineering. 09 (2016) 885–887. www.cafetinnova.org.
S. Kesawan, M. Mahendran, Section compression capacity of high strength cold-formed hollow flange channels, J Constr Steel Res. 133 (2017) 202–213. https://doi.org/10.1016/j.jcsr.2017.02.015.
S. Kesawan, M. Mahendran, Y. Dias, W. bin Zhao, Compression tests of built-up cold-formed steel hollow flange sections, Thin-Walled Structures. 116 (2017) 180–193. https://doi.org/10.1016/j.tws.2017.03.004.
B.L. Gendy, M.T. Hanna, Effect of geometric imperfections on the ultimate moment capacity of cold-formed sigma-shape sections, HBRC Journal. 13 (2017) 163–170. https://doi.org/10.1016/j.hbrcj.2015.04.006
A.M. Mahar, S.A. Jayachandran, M. Mahendran, Design of locally buckling cold-formed steel built-up columns formed by unlipped channel sections, Thin-Walled Structures. 174 (2022). https://doi.org/10.1016/j.tws.2022.109132.
B. Janarthanan, M. Mahendran, Behaviour and strength of unlipped channel sections under combined bending and torsion, J Constr Steel Res. 182 (2021). https://doi.org/10.1016/j.jcsr.2021.106648.
M. Peiris, M. Mahendran, Advanced numerical modelling of light-gauge steel framed walls subject to eccentric compression, Eng Struct. 256 (2022). https://doi.org/10.1016/j.engstruct.2022.114063.
Standards Australia (SA), AS/NZS 4600, Cold-Formed Steel Structures, Standards Australia, Sydney, Australia, 2005.
Standard Nasional Indonesia, Struktur Baja Canai Dingin, Jakarta, Indonesia, 2013. www.bsn.go.id.
Budiman, Buckling Analysis of Skew Plates Subjected to Uniform Compression Loading, International Journal of Civil Engineering and Infrastructure. 2 (2022) 1–9.
B.W. Schafer, T. Peköz, Computational modeling of cold-formed steel: characterizing geometric imperfections and residual stresses, J Constr Steel Res. 47 (1998) 193–210.
DOI: https://doi.org/10.24853/ijcei.2.2.57-65
Refbacks
- There are currently no refbacks.
International Journal of Civil Engineering and Infrastructure (IJCEI) Indexing By:
Copyright of International Journal of Civil Engineering and Infrastructure (IJCEI) (e-ISSN: 2776-2580).
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License