Perencanaan Agregat Produksi Tiang Besi Dengan Pola Permintaan Musiman

Authors

DOI:

https://doi.org/10.24853/jisi.11.2.203-212

Keywords:

Agregat, Disagregasi, Jadwal Induk Produksi, Peramalan

Abstract

Perencanaan produksi merupakan suatu kegiatan yang sangat penting dan diperlukan dalam suatu perusahaan. Perencanaan produksi dapat dimulai dengan peramalan permintaan konsumen yang akan menjadi patokan dalam menentukan jumlah barang yang akan diproduksi. Bagian produksi tiang besi merupakan bagian yang sangat penting pada PT XYZ karena tiang besi merupakan produksi tertua yang masih beroperasi dan menghasilkan keuntungan terbesar bagi perusahaan. Permintaan pasar terhadap tiang besi tidaklah merata disetiap bulannya melainkan cendrung berpola musiman. Hal ini menyebabkan perencanaan produksi yang dilakukan oleh pihak perusahaan seringkali tidak tepat sehingga pemanfaatan sumber daya tidak merata disetiap periodenya. Oleh sebab itu perlu dilakukan penelitian agar dapat merencanakan produksi yang tepat untuk pola permintaan musiman. Berdasarkan hasil penelitian peramalan dilakukan dengan menggunakan metode konstan karena memiliki error terkecil. Sedangkan Perencanaan produksi agregat yang terpilih yaitu level strategy dengan total biaya produksi sebesar Rp. 3.644.729.500,-. Berdasarkan hasil perencanaan produksi agregat dan disagregasi didapatkan jadwal induk produksi untuk setiap jenis tiang per periode dengan jumlah produksi terbanyak yaitu jenis tiang 11-200.

References

Chu, H., Dong, K., Li, R., Cheng, Q., Zhang, C., Huang, K., Yang, C., & Zheng, Y. (2022). Integrated modeling and optimization of production planning and scheduling in hybrid flow shop for order production mode. Computers and Industrial Engineering, 174(November 2021), 108741. https://doi.org/10.1016/j.cie.2022.108741

Febryanti, A. R., & Rani, A. M. (2019). Penerapan Perencanaan Agregat untuk Meminimumkan Biaya Produksi (Studi pada CV. X). Jurnal Manajemen Dan Bisnis Performa, 16(2), 144–150. https://doi.org/10.29313/performa.v16i2.6047

Heniey, H. A., Hiwot, K. G. G., Desta, T. B., & Hiwot, L. W. G. (2022). Optimization of Inventory Controlling System Using Integrated Seasonal Forecasting and Integer Programming. Journal of Optimization in Industrial Engineering, 15(1), 57–66. https://doi.org/10.22094/JOIE.2021.1895036.1732

Ihwah, A., & Putri, R. A. (2019). Forecasting of export demand of black tea in PT XYZ Central Java. IOP Conference Series: Earth and Environmental Science, 230(1). https://doi.org/10.1088/1755-1315/230/1/012012

Kück, M., & Freitag, M. (2021). Forecasting of customer demands for production planning by local k-nearest neighbor models. International Journal of Production Economics, 231(May 2020), 107837. https://doi.org/10.1016/j.ijpe.2020.107837

Lefta, F., Gozali, L., & Marie, I. A. (2020a). Aggregate and disaggregate produetion planning, material requirement, and capacity requirement in Pt. XYZ. IOP Conference Series: Materials Science and Engineering, 852(1). https://doi.org/10.1088/1757-899X/852/1/012123

Lefta, F., Gozali, L., & Marie, I. A. (2020b). Comparison study among production planning research in some papers and industries in Indonesia. IOP Conference Series: Materials Science and Engineering, 852(1). https://doi.org/10.1088/1757-899X/852/1/012096

Mandala, I. K. J. K. (2019). Perencanaan dan Pengendalian Produksi Agregat pada Usaha Tedung UD Dwi Putri Di Klungkung. E-Jurnal Manajemen, 9(1), 99–118. https://doi.org/10.24843/EJMUNUD.2020.v09.i01.p06

Maukar, A. L., & Johan, K. (2019). Peramalan Tepung Jeli Dengan Time Series Analysis Mempertimbangkan Pengaruh Special Event. Seminar Nasional Cendekiawan, 1, 1–7.

Nugraha, I., Hisjam, M., & Sutopo, W. (2020). Aggregate Planning Method as Production Quantity Planning and Control to Minimizing Cost. IOP Conference Series: Materials Science and Engineering, 943(1). https://doi.org/10.1088/1757-899X/943/1/012045

Nurulinzany, & Amrin. (2020). Identification of production planning and supply of glass bottles at the bottled tea company. IOP Conference Series: Materials Science and Engineering, 885(1). https://doi.org/10.1088/1757-899X/885/1/012065

Sofyan, D. K. (2013). Perencanaan & Pengendalian Produksi (1st ed.). Graha Ilmu.

Yulius, H. (2017). Peramalan Kebutuhan Manajemen Logistik Pada Usaha Depot Air Minum Isi Ulang Al-Fitrah. Edik Informatika, 1(1), 5–14. https://doi.org/10.22202/ei.2014.v1i1.1430

Downloads

Published

2024-09-23

Issue

Vol. 11 No. 2 (2024): JISI UMJ

Section

Articles

License

COPYRIGHT POLICY

The author(s) of an article published in the JISI UMJ retains ownership of the intellectual property rights in work (s).

PUBLISHING RIGHTS

The author(s) of an article published in the JISI UMJ have unrestricted publication rights. The authors give the JISI UMJ the right to publish the article and designate the Industrial of Engineering Universitas Muhammadiyah Jakarta Publishing as the original publisher of the article.

LICENSING POLICY
Journal of Industrial Engineering and Sciences is an open-access journal that follows the Creative Commons Non-Commercial 4.0 International License (CC BY-NC 4.0), which states that: 


Under this license, the reusers must give appropriate credit, provide a link to the license, and indicate if changes were made. Users may do so in any reasonable manner, but not in any way that suggests the licensor endorses users or their use.
Please take the time to read the whole license agreement (https://creativecommons.org/licenses/by-nc/4.0/). As long as reusers follow the license conditions, the owner cannot withdraw these freedoms. The following components are included under this license:

Attribution: Users must provide appropriate attribution, including a link to the license, and indicate whether or not they made any modifications. Users are free to do so reasonably, but not in a manner that indicates the licensee approves of their usage.

NonCommercial: Users may not use the material for commercial purposes.