Simulation of The Effect of Interfrency and EIRP on To DVB-S2 and DVB-RCS2 Network QOS

Authors

  • Heskia Jefri Saputra Sekolah Tinggi Teknologi Kedirgantaraan
  • Faiz Alfatih Sekolah Tinggi Teknologi Kedirgantaraan
  • Sabri Alimi Sekolah Tinggi Teknologi Kedirgantaraan

DOI:

https://doi.org/10.24853/jurtek.16.2.251-258

Keywords:

Satellite, DVB-RCS, DVB-S2, NS-3, QoS.

Abstract

Satellite communication technology in aircraft is used for long-distance communication between aircraft and outside parties, This study uses NS-3 as software to simulate satellite communication process and analyze QoS based on DVB-RCS and DVB-S2 technology looking at  throughput, delay, PDR parameter values. This simulation aims to obtain QoS value of data sent from the user terminal to gateway based on variations in antenna gain and to determine the effect of  interference level caused by noise on user's device on quality of data reception. Results of running from UT to GW five variations of antenna gain, namely 28, 29, 30, 33, 35 Dbi, Average throughput is 29.9301 Kbps, delay is 48.9212 s, and PDR is 29.7322%. For the results of running from GW to UT with same five variations of antenna gain and five variations of noise, is 0 db, 24.7 db, 49, 7db, the throughtput results are 203.549 Kbps with delay of 0, 263834 s, and PDR is 99.91%. The conclusion obtained is that simulation using NS-3 simulator tool with an antenna amplifier has increased throughput, delay, and PDR as well as service quality and level of user interference is stable and doesn’t experience a decrease in package delivery.

Downloads

Download data is not yet available.

References

Afandi, A., Afifah, F., Ramza, H., and Fayakun, K. (2019). ANALISA PERBANDINGAN PENGUKURAN MARGIN SINYAL DVB-S2 PADA SATELIT ASIASAT 9. E - ISSN, Jurnal Kajian Teknik Elektro, April, 2014.

Aprianto, B., M. Ficky Duskarnaen, and Hamidillah Ajie. (2020). Analisis Quality of Service (Qos) Pada Jaringan Internet Smk Negeri 7 Jakarta. PINTER : Jurnal Pendidikan Teknik Informatika Dan Komputer, 4(2), 32–36. https://doi.org/10.21009/pinter.4.2.6

Fahmi, H. (2018). Analisis Qos (Quality of Service) Pengukuran Delay, Jitter, Packet Lost Dan Throughput Untuk Mendapatkan Kualitas Kerja Radio Streaming Yang Baik. Jurnal Teknologi Informasi Dan Komunikasi, 7(2), 98–105.

Fatimah, S. (2017). Sistem Komunikasi. Journal of Chemical Information and Modeling, 53(9), 1689–1699.

Lesmana, R. A., Muayyadi, A. A., Usman, U. K., and Telkom, U. (2019). Publik Lokal ( Lppl ) Kandaga Am Di Daerah Soreang , Kab . Bandung.

Pambudi, R. F., Dermawan, W. R., Hifani, R., Sembada, I. V., and Musaffa, Q. S. (2018). Pengaruh Variasi Fraksi Volume Serat Sabut Kelapa Komposit Unsaturated Polyester Terhadap Kekuatan Bending. Jurnal Stator, 1(1), 111–112.

Rachmat, I. F. M. (2021). Analisa Bandwidth Pada Jaringan Internet Menggunakan Parameter Quality of Service (Studi Kasus: Café Ilham). Jurnal Ipsikom, 9(1), 2338–4093.

S. Raj, J., and Basar, A. (2019). Qos Optimization of Energy Efficient Routing in Iot Wireless Sensor Networks. Journal of ISMAC, 01(01), 12–23. https://doi.org/10.36548/jismac.2019.1.002

Salam, A. A., Luglio, M., Roseti, C., and Zampognaro, F. (2018). A burst-approach for transmission of TCP traffic over DVB-RCS2 links. 2015 IEEE 20th International Workshop on Computer Aided Modelling and Design of Communication Links and Networks, CAMAD 2015, 175–179. https://doi.org/10.1109/CAMAD.2015.7390504

Vanny Andini, Lipur Sugiyanta, and Bachren Zaini. (2020). Analisis Kinerja Parameter Throughput Dan Delay Akses Inetrnet Di Smk Karyaguna Jakarta Selatan. PINTER : Jurnal Pendidikan Teknik Informatika Dan Komputer, 4(2), 41–44. https://doi.org/10.21009/pinter.4.2.8

Wicaksana, A. (2018). NETWORK SIMULATOR TRAINING by using NS-3. In Https://Medium.Com/. https://medium.com/@arifwicaksanaa/pengertian-use-case-a7e576e1b6bf

Published

2024-07-31

How to Cite

Saputra, H. J., Alfatih, F., & Alimi, S. (2024). Simulation of The Effect of Interfrency and EIRP on To DVB-S2 and DVB-RCS2 Network QOS. Jurnal Teknologi, 16(2), 251–258. https://doi.org/10.24853/jurtek.16.2.251-258

Issue

Vol. 16 No. 2 (2024): Jurnal Teknologi

Section

Articles

License

COPYRIGHT POLICY

The author(s) of an article published in the Jurnal Teknologi retains ownership of the intellectual property rights in work (s).

PUBLISHING RIGHTS

The author(s) of an article published in the Jurnal Teknologi have unrestricted publication rights. The authors give the Jurnal Teknologi the right to publish the article and designate the Faculty of Engineering Universitas Muhammadiyah Jakarta Publishing as the original publisher of the article.

LICENSING POLICY
Journal of Mechanical Engineering and Sciences is an open-access journal that follows the Creative Commons Non-Commercial 4.0 International License (CC BY-NC 4.0), which states that: 


Under this license, the reusers must give appropriate credit, provide a link to the license, and indicate if changes were made. Users may do so in any reasonable manner, but not in any way that suggests the licensor endorses users or their use.
Please take the time to read the whole license agreement (https://creativecommons.org/licenses/by-nc/4.0/). As long as reusers follow the license conditions, the owner cannot withdraw these freedoms. The following components are included under this license:

Attribution: Users must provide appropriate attribution, including a link to the license, and indicate whether or not they made any modifications. Users are free to do so reasonably, but not in a manner that indicates the licensee approves of their usage.

NonCommercial: Users may not use the material for commercial purposes.