RANCANG BANGUN ALAT PENDETEKSI DINI OVER HEAT MESIN KENDARAAN MELALUI SUHU AIR PENDINGIN
DOI:
https://doi.org/10.24853/jurtek.15.1.33-42Keywords:
Kalman Filter Method, Over Heat, DS18B20 Sensor, Cooling SystemAbstract
There is currently no cooling system in the vehicle's engine using voice and display instructions that warn the driver that the engine's working temperature has passed a predetermined threshold. To overcome the problems described previously, research was carried out. The result of this research is a tool or device that can detect if there is overheating in the vehicle engine using the DS18B20 sensor. In this tool a warning system is given with voice commands and a display that shows the state of the engine's working temperature at that time. In this study, the Kalman Filter method was used to reduce noise in temperature measurements by the DS18B20 sensor. The results of measuring changes in the average temperature using the Kalman Filter method are 0.019 ° C and without the Kalman Filter method are 0.58 ° C. Based on the results of these comparisons using the Kalman Filter method the temperature measurement noise obtained is smaller.Downloads
References
Agbinya, Johnson I. 2020. Applied Data Analytics-Principles and Application. 1st ed. New York: River Publishers.
Ambarita, Himsar. 2017. Perpindahan Panas Dan Massa: Penyelesaian Analitik Dan Numerik. Malang: Inteligensia Media.
Beta, Samuel, and Sri Astuti. 2019. “Modul Timbangan Benda Digital Dilengkapi LED RGB Dan DFPlayer Mini.” Jurnal Orbith 15(1):10–15.
Destiarini, and Pius Widya Kumara. 2019. “Robot Line Follower Berbasis Mikrokontroller Arduino Uno ATMega328.” Jurnal Informatika 5(1):18–25.
Imam, Muammarul, Esa Apriaskar, and Djuniadi. 2019. “Pengendalian Suhu Air Menggunakan Sensor Suhu DS18B20.” Jurnal J-Ensitec 6(1):347–52. doi: http://dx.doi.org/10.31949/j-ensitec.v6i01.2016.
Inayah, Inayatul. 2021. “Analisis Akurasi Sistem Sensor IR MLX90614 Dan Sensor Ultrasonik Berbasis Arduino Terhadap Termometer Standar.” Jurnal Fisika Unand 10(4).
Kristanto, Philip, and Rahardjo Tirtoatmodjo. 2000. “Pengaruh Suhu Dan Tekanan Udara Masuk Terhadap Kinerja Motor Diesel Tipe 4 JA 1.” Jurnal Teknik Mesin 2(1):7–14.
Maksum, Hasan, Toto Sugiarto, and Nico L. H. Saragih. n.d. “Pengaruh Variasi Cairan Pendingin (Coolant) Terhadap Efektivitas Radiator Pada Engine Diesel.”
Marjuki, Ismael, and Epriyandi. 2021. “Pencegahan Over Heating Mesin Mobil Hilux Double Cabin.” Indonesian Journal of Mechanical Engineering Vocational 1(1):41–46.
Prasetyo, Imam, and Arifin Putra Pardana. 2018. “Identifikasi Dan Trouble Shooting Sistem Pendingin Pada Mesin Daihaatsu Grnadmax Dan Cara Mengatasinya.” Surya Teknika 3(1):6–15.
Purba, Minda Mora. 2019. “Pemanfaatan Teknologi Informasi Dalam Bidang Otomotif.” Jurnal Sistem Informasi Universitas Suryadarma 6(1).
Purnomo, Hendro, and Rasma. 218AD. “Analisis Kebocoran Air Pendingin Dari Radiator Pada Bulldozer Tipe D375A-5.” Pp. 1–7 in Seminar Nasional Sains dan Teknologi Fakultas Teknik Universitas Muhammadiyah Jakarta. Jakarta: FT Universitas Muhammadiyah Jakarta.
Purwono, Hendro, and Rasma. 2019. “Analisis Terjadinya Panas Berlebihan Pada Mesin Dump Truck HD785-7.” in Seminar Nasional Sains dan Teknologi Fakultas Teknik Universitas Muhammadiyah Jakarta, edited by Daruki, D. Susilo, A. I. Ramadhan, R. Samsiar, and S. F. UMJ. Jakarta: Universitas Muhammadiyah Jakarta.
Rozaq, Imam Abdul, and Noor DS Yulita. 2017. “Uji Karakterisasi Sensor Suhu DS18B20 Waterproof Berbasis Arduino Uno Sebagai Salah Satu Parameter Kualitas Air.” Pp. 303–9 in Prosiding SNATIF ke-4. Kudus: Fakultas Teknik Universitas Muria Kudus.
Saputra, Stefanus Agista Bagus, and Aris Ansori. 2017. “Pengaruh Pengaplikasian Oil Cooler Terhadap Suhu Oli Dan Peforma Mesin Pada Kendaraan Sepeda Motor Mega Pro Tahun 2011.” JPTM 6(2):67–73.
Subagyo, Lucky Aggazi, and Bambang Suprianto. 2017. “Sistem Monitoring Arus Tidak Seimbang 3 Fasa Berbasis Arduino Uno.” Jurnal Teknik Elektro 6(3):213–21.
Supu, Idawati, Baso Usman, Selviani Basri, and Sunarmi. 2016. “Pengaruh Suhu Terhadap Perpindahan Panas Pada Material Yang Berbeda.” Jurnal Dinamika 7(1):62–73.
Tengger, Billy Arifa, and Ropiudin. 2019. “Pemanfaatan Metode Kalman Filter Diskrit Untuk Menduga Suhu Udara.” Square: Jurnal of Mathematics and Mathematics Education 1(2):127–32.
Tobing, Rido Lumban, Wusnah, Novi Sylvia, Azhari, and Nasrul ZA. 2021. “Studi Akurasi Model Pembakaran Terhadap Prediksi Temperatur Pada Nyala Metana Tak Pracampur Menggunakan Computational Fluid Dynamics (CFD).” Chemical Engineering Journal Storage 1(1):42–50.
Downloads
Published
How to Cite
Issue
Section
License
COPYRIGHT POLICY
The author(s) of an article published in the Jurnal Teknologi retains ownership of the intellectual property rights in work (s).
PUBLISHING RIGHTS
The author(s) of an article published in the Jurnal Teknologi have unrestricted publication rights. The authors give the Jurnal Teknologi the right to publish the article and designate the Faculty of Engineering Universitas Muhammadiyah Jakarta Publishing as the original publisher of the article.
LICENSING POLICY
Journal of Mechanical Engineering and Sciences is an open-access journal that follows the Creative Commons Non-Commercial 4.0 International License (CC BY-NC 4.0), which states that:
Under this license, the reusers must give appropriate credit, provide a link to the license, and indicate if changes were made. Users may do so in any reasonable manner, but not in any way that suggests the licensor endorses users or their use.
Please take the time to read the whole license agreement (https://creativecommons.org/licenses/by-nc/4.0/). As long as reusers follow the license conditions, the owner cannot withdraw these freedoms. The following components are included under this license:
Attribution: Users must provide appropriate attribution, including a link to the license, and indicate whether or not they made any modifications. Users are free to do so reasonably, but not in a manner that indicates the licensee approves of their usage.
NonCommercial: Users may not use the material for commercial purposes.
