Flettner Rotor Implication on Ship Ferry The Kalianget-Kagean Route Using Computational Fluid Dynamics

Article Sidebar

PDF
Published: Jan 30, 2024
DOI: https://doi.org/10.24853/jurtek.16.1.33-40
Keywords:
Flettner Rotor CFD Coefficient of Lift Lift Force Ship Ferry

Main Article Content

Akmal Firdausyah
Fakultas Teknik dan Ilmu Kelautan Universitas Hang Tuah Surabaya
Ali Munazid
Fakultas Teknik dan Ilmu Kelautan Universitas Hang Tuah Surabaya
Prastyono Eko Pambudi
IST AKPRIND
Bagiyo Suwasono
Fakultas Teknik dan Ilmu Kelautan Universitas Hang Tuah Surabaya

Abstract

Ship's Ferries are a sea crossing that continues to operate around the time. The consequence related to shipping activities is an increase in ship exhaust emissions. One alternative for ship propulsion that is environmentally friendly is the Flettner rotor. The working principle of the tool follows the theory of the Magnus effect, where the force arises due to the difference in pressure between the two sides of the Flettner rotor. This study implicates the Flettner rotor on the Kalianget-Kangean ferry route with variations in wind speeds of 10, 15 and 20 knots and variations in dimensions of 3x1, 5x1 and 7x1 meters with a rotational speed of 500 rpm. Optimal results through computational fluid dynamics (CFD) simulations show a coefficient of lift (CL) of 3.647 and a lift force (Fl) of 2,980,631.2 kilonewton with dimensions of 5x1 meters and a wind speed of 15 knots. While the implicit percentage of Flettner rotors in KMP. DBS I of 18.11%, KMP. DBS III of 11.27%, and KMP. NS 92 of 5.45%.

Downloads

Download data is not yet available.

Article Details

How to Cite
Firdausyah, A., Munazid, A., Pambudi, P. E., & Suwasono, B. (2024). Flettner Rotor Implication on Ship Ferry The Kalianget-Kagean Route Using Computational Fluid Dynamics. Jurnal Teknologi, 16(1), 33–40. https://doi.org/10.24853/jurtek.16.1.33-40
Issue
Vol. 16 No. 1 (2024): Jurnal Teknologi
Section
Articles

COPYRIGHT POLICY

The author(s) of an article published in the Jurnal Teknologi retains ownership of the intellectual property rights in work (s).

PUBLISHING RIGHTS

The author(s) of an article published in the Jurnal Teknologi have unrestricted publication rights. The authors give the Jurnal Teknologi the right to publish the article and designate the Faculty of Engineering Universitas Muhammadiyah Jakarta Publishing as the original publisher of the article.

LICENSING POLICY
Journal of Mechanical Engineering and Sciences is an open-access journal that follows the Creative Commons Non-Commercial 4.0 International License (CC BY-NC 4.0), which states that: 


Under this license, the reusers must give appropriate credit, provide a link to the license, and indicate if changes were made. Users may do so in any reasonable manner, but not in any way that suggests the licensor endorses users or their use.
Please take the time to read the whole license agreement (https://creativecommons.org/licenses/by-nc/4.0/). As long as reusers follow the license conditions, the owner cannot withdraw these freedoms. The following components are included under this license:

Attribution: Users must provide appropriate attribution, including a link to the license, and indicate whether or not they made any modifications. Users are free to do so reasonably, but not in a manner that indicates the licensee approves of their usage.

NonCommercial: Users may not use the material for commercial purposes.

References

Info Pelaut. (2019). Definisi dan Jenis Kapal Ferry, https://infopelaut.com/kapal-ferry/.

Fauzi, A. (2018). Wabup Sumenep: Luncurkan KMP. DBS III untuk Transportasi Kepulauan, Media Center, http://sumenepkab.go.id/berita/baca/wabup-sumenep-luncurkan-kmp-dbs-iii-untuk-transportasi-kepulauan.

Pearson, D. R. (2014). The Use of Flettner rotors in Efficient Ship Design, Influence of EEDI on Ship Design, The Royal Institution of Naval Architects, UK.

Buhaug, Ø., Corbett, J.J., Endresen, Ø., Eyring, V., Faber, J., Hanayama, S., Lee, D.S., Lee, D., Lindstad, H., Markowska, A.Z., Mjelde, A., Nelissen, D., Nilsen, J., Pålsson, C., Winebrake, J.J., Wu, W., and Yoshida, K. (2009). Second IMO GHG Study 2009, Working Paper, International Maritime Organization.

Agustin, D. dan Kurniawati, H. A. “Desain kapal motor penyeberangan dengan sistem penggerak hibrida untuk rute ujung Surabaya-Kamal Bangkalan.” Jurnal Teknik ITS, Vol. 6, No. 2 (2017), G59-G64.

http://dx.doi.org/10.12962/j23373539.v6i2.23359

De Marco, A. De, Mancini, S., Pensa, C., Calise, G., and De Luca, F. “Flettner rotor concept for marine applications: a systematic study.” International Journal of Rotating Machinery. Vol. 2016 (2016), 1-12.

https://doi.org/10.1155/2016/3458750

Santoso, A., Zaman, M. B., & Prawira, A. Y. “Techno-economic analysis of rotor flettner in container ship 4000 DWT.” International Journal of Marine Engineering Innovation and Research, Vol. 1, No. 3 (2017), 189-195.

http://dx.doi.org/10.12962/j25481479.v1i3.2074

Karnan, C. M., Thanikachalam, V., Rajesh, M., and Anbazhahan, K. “A review of flettner rotor sails.” International Journal of Interdisciplinary Research and Innovations, Vol. 6, No. 4 (2018), 561–565.

Arief, I.S., Santosa, A., and Azzam, A. “Design of flettner rotor in container carrier 4000 DWT with CFD method.” International Journal of Marine Engineering Innovation and Research, Vol. 2, No. 2 (2018), 133-139.

http://dx.doi.org/10.12962/j25481479.v2i2.2736

Angelini, G., Muggiasca, S. and Belloli, M. “A Techno-Economic of a Cargo Ship Using Flettner Rotors.” Journal of Marine Science and Engineering, Vol. 11 No. 229 (2023), 1-26.

https://doi.org/10.3390/jmse11010229

Prasita, V.D., Zati, L.A. and Widagdo, S. “The characteristics of west season wind and wave as well as their impacts on ferry cruise in the Kalianget-Kangean cruise route, Madura, Indonesia.” Pertanika Journals: Science and Technology, Vol. 29, No. 3 (2021), 2087-2102.

https://doi.org/10.47836/pjst.29.3.16

Anderson, J.D.Jr. 1995. Computational Fluid Dynamics: The Basic with Applications, McGraw-Hill series in mechanical engineering, McGraw-Hill series in aeronautical and aerospace engineering.

Date, A.W. (2005). Introduction to Computational Fluid Dynamics, Cambridge University Press.

Lecheler, S. (2017). Computational Fluid Dynamics: Getting Started Quickly With ANSYS CFX 18 Through Simple Examples, Springer.

Gharagozloo, A.H., Negahdari, M.R. and Ebrahimi, A. “Numerical study on body flettner sail using computational fluid dynamics.” International Journal of Maritime Technology, Vol. 16 Summer (2021), 63-71. http://dorl.net/dor/20.1001.1.23456000.2021.16.0.7.2

Tillig, F. and Ringsberg, J.W. “Design, operaton and analysis of wind-assisted cargo ships.” Ocean Engineering, Vol. 211 (2020), 1-23. https://doi.org/10.1016/j.oceaneng.2020.107603