Flettner Rotor Implication on Ship Ferry The Kalianget-Kagean Route Using Computational Fluid Dynamics

Akmal Firdausyah; Ali Munazid; Prastyono Eko Pambudi; Bagiyo Suwasono

doi:10.24853/jurtek.16.1.33-40

Flettner Rotor Implication on Ship Ferry The Kalianget-Kagean Route Using Computational Fluid Dynamics

Akmal Firdausyah, Ali Munazid, Prastyono Eko Pambudi, Bagiyo Suwasono

Abstract

Ship's Ferries are a sea crossing that continues to operate around the time. The consequence related to shipping activities is an increase in ship exhaust emissions. One alternative for ship propulsion that is environmentally friendly is the Flettner rotor. The working principle of the tool follows the theory of the Magnus effect, where the force arises due to the difference in pressure between the two sides of the Flettner rotor. This study implicates the Flettner rotor on the Kalianget-Kangean ferry route with variations in wind speeds of 10, 15 and 20 knots and variations in dimensions of 3x1, 5x1 and 7x1 meters with a rotational speed of 500 rpm. Optimal results through computational fluid dynamics (CFD) simulations show a coefficient of lift (C_L) of 3.647 and a lift force (F_l) of 2,980,631.2 kilonewton with dimensions of 5x1 meters and a wind speed of 15 knots. While the implicit percentage of Flettner rotors in KMP. DBS I of 18.11%, KMP. DBS III of 11.27%, and KMP. NS 92 of 5.45%.

Keywords

Flettner Rotor, CFD, Coefficient of Lift, Lift Force, Ship Ferry

Full Text:

PDF

References

Info Pelaut. (2019). Definisi dan Jenis Kapal Ferry, https://infopelaut.com/kapal-ferry/.

Fauzi, A. (2018). Wabup Sumenep: Luncurkan KMP. DBS III untuk Transportasi Kepulauan, Media Center, http://sumenepkab.go.id/berita/baca/wabup-sumenep-luncurkan-kmp-dbs-iii-untuk-transportasi-kepulauan.

Pearson, D. R. (2014). The Use of Flettner rotors in Efficient Ship Design, Influence of EEDI on Ship Design, The Royal Institution of Naval Architects, UK.

Buhaug, Ø., Corbett, J.J., Endresen, Ø., Eyring, V., Faber, J., Hanayama, S., Lee, D.S., Lee, D., Lindstad, H., Markowska, A.Z., Mjelde, A., Nelissen, D., Nilsen, J., Pålsson, C., Winebrake, J.J., Wu, W., and Yoshida, K. (2009). Second IMO GHG Study 2009, Working Paper, International Maritime Organization.

Agustin, D. dan Kurniawati, H. A. “Desain kapal motor penyeberangan dengan sistem penggerak hibrida untuk rute ujung Surabaya-Kamal Bangkalan.” Jurnal Teknik ITS, Vol. 6, No. 2 (2017), G59-G64.

http://dx.doi.org/10.12962/j23373539.v6i2.23359

De Marco, A. De, Mancini, S., Pensa, C., Calise, G., and De Luca, F. “Flettner rotor concept for marine applications: a systematic study.” International Journal of Rotating Machinery. Vol. 2016 (2016), 1-12.

https://doi.org/10.1155/2016/3458750

Santoso, A., Zaman, M. B., & Prawira, A. Y. “Techno-economic analysis of rotor flettner in container ship 4000 DWT.” International Journal of Marine Engineering Innovation and Research, Vol. 1, No. 3 (2017), 189-195.

http://dx.doi.org/10.12962/j25481479.v1i3.2074

Karnan, C. M., Thanikachalam, V., Rajesh, M., and Anbazhahan, K. “A review of flettner rotor sails.” International Journal of Interdisciplinary Research and Innovations, Vol. 6, No. 4 (2018), 561–565.

Arief, I.S., Santosa, A., and Azzam, A. “Design of flettner rotor in container carrier 4000 DWT with CFD method.” International Journal of Marine Engineering Innovation and Research, Vol. 2, No. 2 (2018), 133-139.

http://dx.doi.org/10.12962/j25481479.v2i2.2736

Angelini, G., Muggiasca, S. and Belloli, M. “A Techno-Economic of a Cargo Ship Using Flettner Rotors.” Journal of Marine Science and Engineering, Vol. 11 No. 229 (2023), 1-26.

https://doi.org/10.3390/jmse11010229

Prasita, V.D., Zati, L.A. and Widagdo, S. “The characteristics of west season wind and wave as well as their impacts on ferry cruise in the Kalianget-Kangean cruise route, Madura, Indonesia.” Pertanika Journals: Science and Technology, Vol. 29, No. 3 (2021), 2087-2102.

https://doi.org/10.47836/pjst.29.3.16

Anderson, J.D.Jr. 1995. Computational Fluid Dynamics: The Basic with Applications, McGraw-Hill series in mechanical engineering, McGraw-Hill series in aeronautical and aerospace engineering.

Date, A.W. (2005). Introduction to Computational Fluid Dynamics, Cambridge University Press.

Lecheler, S. (2017). Computational Fluid Dynamics: Getting Started Quickly With ANSYS CFX 18 Through Simple Examples, Springer.

Gharagozloo, A.H., Negahdari, M.R. and Ebrahimi, A. “Numerical study on body flettner sail using computational fluid dynamics.” International Journal of Maritime Technology, Vol. 16 Summer (2021), 63-71. http://dorl.net/dor/20.1001.1.23456000.2021.16.0.7.2

Tillig, F. and Ringsberg, J.W. “Design, operaton and analysis of wind-assisted cargo ships.” Ocean Engineering, Vol. 211 (2020), 1-23. https://doi.org/10.1016/j.oceaneng.2020.107603

DOI: https://doi.org/10.24853/jurtek.16.1.33-40