ANALISIS BEBAN KERJA FISIK OPERATOR PANEN KELAPA SAWIT MENGGUNAKAN METODE BIOMEKANIKA

Khairunnisa Khairunnisa, Meri Andriani, Wiky Sabardi

Abstract


Palm Oil Mill PT. Perkebunan Nusantara I (PKS PTPN 1) Tanjung Seumentoh is a company that processes palm oil into Crude Palm Oil (CPO) with a production capacity of 45 tons of Fresh Fruit Bunches (FFB)/hour with a factory area of ±10 Ha. Harvesting of oil palm fruit is done manually using the Egrek tool. The purpose of this study was to identify the compressive force and lift index of oil palm harvesting operators. The research stages, there are three stages of research, namely the first stage, namely the survey of the research location, the second stage of collecting research data on the number of workers, age of workers, weight of equipment, and height of equipment used to harvest oil palm fruit, the third stage is data processing using the Biomechanics method with calculations the maximum. Permissible Limit (MPL) Recommended Weight Limit (RWL). The method used, Biomechanics is divided into two methods, namely Maximum Permissible Limit (MPL) and Recommended Weight Limit (RWL). Results and discussion, from the calculation of RWL on 8 operators obtained an average Horizontal Multiplier (HM) 0.89, Vertical Multiplier (VM) 62,41625, Distance Multiplier (DM) 1.01875, Asymmetric Multiplier (AM) 1. MPL calculation from 8 operators obtained an average average Wtotal 421.79, Abdominal Pressure (PA) 1.8, Muscle force 681.79, Wrist Moment 1.05, Sacral Moment 11.47375, Total Moment 35.06. In conclusion, the compressive force on 8 oil palm harvesting operators with an average Recommended Weight Limit (RWL) of 1173.3 N and an average value of Maximum Permissible Limit (MPL) of 715.8 N. Workload on 8 operators with an average value -average 0. The method used, Biomechanics is divided into two methods, namely Maximum Permissible Limit (MPL) and Recommended Weight Limit (RWL). Results and discussion, from the calculation of RWL on 8 operators obtained an average Horizontal Multiplier (HM) 0.89, Vertical Multiplier (VM) 62,41625, Distance Multiplier (DM) 1.01875, Asymmetric Multiplier (AM) 1. MPL calculation from 8 operators obtained an average average Wtotal 421.79, Abdominal Pressure (PA) 1.8, Muscle force 681.79, Wrist Moment 1.05, Sacral Moment 11.47375, Total Moment 35.06. In conclusion, the compressive force on 8 oil palm harvesting operators with an average Recommended Weight Limit (RWL) of 1173.3 N and an average value of Maximum Permissible Limit (MPL) of 715.8 N. Workload on 8 operators with an average value -average 0. The method used, Biomechanics is divided into two methods, namely Maximum Permissible Limit (MPL) and Recommended Weight Limit (RWL). Results and discussion, from the calculation of RWL on 8 operators obtained an average.


Full Text:

PDF

References


Al-hinai, Nasr, Mahmood Al-kindi, dan Ahm Shamsuzzoha. 2018. “An Ergonomic Student Chair Design and Engineering for Classroom Environment.” 7(5):534–43.

Andriani, M. 2018. “Application of Anthropometry to Overcome Musculoskeletal Problems Application of Anthropometry to Overcome Musculoskeletal Problems.”

Andriani, Meri, dan Rita Syntia. n.d. “The Impact of Anthropometry on Terasi Packaging The Impact of Anthropometry on Terasi Packaging.”

Article, Original. 2022. “Ergonomics Evaluation of Manual Lifting Task on Biomechanical Stress in Symmetric Posture 1.” 12(3):206–14.

Asghari, Elnaz, Iman Dianat, Farahnaz Abdollahzadeh, dan Fariba Mohammadi. 2019. “International Journal of Industrial Ergonomics Musculoskeletal pain in operating room nurses : Associations with quality of work life , working posture , socio-demographic and job characteristics.” International Journal of Industrial Ergonomics 72(May):330–37.

Desember, No Juli. 2021. “Global Science Society : Jurnal Ilmiah Pengabdian Kepada Masyarakat MASKER ERGONOMIS MINIMIZING THE DISTRIBUTION OF THE COVID-19 PLAGUE THROUGH ERGONOMIC Global Science Society : Jurnal Ilmiah Pengabdian Kepada Masyarakat PENDAHULUAN Kota Langsa merupakan.” 3(2):178–85.

Film, Composite, By Electrodeposition, Masaya Ozawa, dan Susumu Arai. 2019. “Anthropometry application of students in the design of campus tables and chairs Anthropometry application of students in the design of campus tables and chairs.”

Forsman, Mikael, Mikael Forsman, dan Mikael Forsman. n.d. “MTM-based ergonomic workload analysis Related papers.”

Fouladi-dehaghi, Behzad, Reza Tajik, Leila Ibrahimi-ghavamabadi, dan Javad Sajedifar. 2021. “International Journal of Industrial Ergonomics Physical risks of work-related musculoskeletal complaints among quarry workers in East of Iran.” International Journal of Industrial Ergonomics 82(July 2019):103107.

Gallagher, Sean, dan Mark C. Schall Jr. 2016. “Musculoskeletal disorders as a fatigue failure process : evidence , implications and research needs research needs.” Ergonomics 0139(February 2017):0.

Genitrini, Matteo, Francesca Dotti, Eleonora Bianca, dan Ada Ferri. 2022. “Impact of Backpacks on Ergonomics : Biomechanical and Physiological Effects : A Narrative Review.”

Kramer, R. n.d. “An Anthropometric Dimensions Measurement Method Using Multi-pose Human Images with Complex Background An Anthropometric Dimensions Measurement Method Using Multi-pose Human Images with Complex Background.”

Kuiper, Judith. n.d. “Epidemiologic evidence on manual materials handling as a risk factor for back disorders : a systematic review.”

Lim, Sol, dan Clive D’Souza. 2020. “A narrative review on contemporary and emerging uses of inertial sensing in occupational ergonomics.” International Journal of Industrial Ergonomics 76(February):102937.

Merikh-nejadasl, Atieh, Ilias El, Greet Van De Perre, Tom Verstraten, dan Bram Vanderborght. 2021. “A generic algorithm for computing optimal ergonomic postures during working in an industrial environment.” International Journal of Industrial Ergonomics 84(May):103145.

Nagamachi, Mitsuo. n.d. “Kansei Engineering : A new ergonomic consumer-oriented technology for product development.”

Rajesh, R. 2016. “Manual material handling : A classification scheme.” Procedia Technology 24(1978):568–75.

Ranavolo, Alberto, Arash Ajoudani, Andrea Cherubini, Matteo Bianchi, Lars Fritzsche, Sergio Iavicoli, Massimo Sartori, Alessio Silvetti, Bram Vanderborght, Tiwana Varrecchia, dan Francesco Draicchio. 2020. “The Sensor-Based Biomechanical Risk Assessment at the Base of the Need for Revising of Standards for Human Ergonomics.”

Ranavolo, Alberto, Francesco Draicchio, Tiwana Varrecchia, dan Alessio Silvetti. 2018. “Wearable Monitoring Devices for Biomechanical Risk Assessment at Work : Current Status and Future Challenges — A Systematic Review.” 1–26.

Rubio-valdehita, Susana, Ma Inmaculada López-núñez, dan Ma Díaz-ramiro. 2017. “Ergonomic Assessment of Mental Workload in Higher Education . Effects of Education System on Student ’ s Workload Perception.”

Saingo, Reno Raines, Luh Putu Ruliati, dan Afrona E. L. Takaeb. 2022. “Media Kesehatan Masyarakat ERGONOMIC RISK OF MUSCULOSKELETAL DISORDERS Media Kesehatan Masyarakat.” 4(2):235–44.

The, Warse, dan World Academy. n.d. “Analysis of Work Posture and Manual Material Handling in a Flour Production Process.”

Tröster, Mark, Sarah Budde, Christophe Maufroy, Michael Skipper Andersen, John Rasmussen, Urs Schneider, dan Thomas Bauernhansl. 2022. “Biomechanical Analysis of Stoop and Free-Style Squat Lifting and Lowering with a Generic Back-Support Exoskeleton Model.”

Tröster, Mark, David Wagner, Felix Müller-graf, Christophe Maufroy, Urs Schneider, dan Thomas Bauernhansl. n.d. “Biomechanical Model-Based Development of an Active Occupational Upper-Limb Exoskeleton to Support Healthcare Workers in the Surgery Waiting Room.”

Widodo, Lamto, dan Christian Ruslie. n.d. “Ergonomic Analysis By Using REBA , WERA And Biomechanics Method In The Production Process Of Women ’ s Bags In Small Industry ( SME ) Ergonomic Analysis By Using REBA , WERA And Biomechanics Method In The Production Process Of Women ’ s Bags In Small Indu.”

Wong, Y. L., John Rosecrance, Bob Meyer, Ira Janowit, Y. L. Wong, dan Kermit Davis. 2004. “Biomechanical analysis of risk factors for work-related musculoskeletal disorders during repetitive li ing task ...”

Zhang, Yongbao, Jinjing Ke, dan Xiang Wu. 2020. “A Biomechanical Waist Comfort Model for Manual Material Lifting.”




DOI: https://doi.org/10.24853/jurtek.15.2.257-266

Refbacks

  • There are currently no refbacks.


Jurnal Teknologi Indexed by:

Directory of Open Access JournalGoogle ScholarRoadIndonesia Scientific Journal Database (ISJD)Index Copernicus International (ICI)Garba Rujukan Digital(Garuda)CrossrefScience and Technology Index (SINTA)Directory of Research Journal Indexing (DRJI)CiteFactorResearchgateIndonesia One SearchAcedemia.eduResearchBibAcademickeysBielefeld Academic Search Engine (BASE)JifactorPKP IndexSherpa romeoworldcat


Copyright of Jurnal Teknologi (e-ISSN:2460-0288, p-ISSN:2085-1669).

 

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License

Powered by Puskom-UMJ