Optimization of Manufacturing Company's Production Process Using Lean Six Sigma
DOI:
https://doi.org/10.24853/jurtek.16.2.213-224Keywords:
Lean six sigma, Waste, Defect.Abstract
In the manufacturing industry, product quality is the main focus. Companies must ensure products meet quality standards. PT. Preshion Engineering Plastec Surabaya is a company that produces plastec supporting components. The object of this study is Yamaha emblem assy products. With Lean six sigma using DMAIC (Define, Measure, Analyze, Improve, Control) methodology to improve production processes. In addition, it improves the efficiency and effectiveness of the production process, improves product quality. The emblem assy product from CTQ shows that there are 4 defects that occur, namely outgoing rays, dirty, shin marks, and short mold. So that the DPMO (Defect Per Million Opportunies) value from January to March 2023 is 159784.715 with an average of 13315.39 and produces a sigma value of 45.0011 with an average of 3.75. Identification of the root causes of defects in Emblem assy products that are dominant with fishbone diagrams, namely dirty injection machines and material mixing machines, old machine age. It is hoped that further research can identify the factors that cause product defects with broader and more significant aspects to be used.Downloads
References
D. P. Andriyany, “Analisis Konsep Produktivitas dan Faktor-Faktor yang Mempengaruhi Produktivitas Kerja Karyawan (Studi Literatur),” STIE PGRI Dewantara Jombang, 2021.
M. Sinungan, Produktivitas: Apa dan Bagaimana. Jakarta: Bumi Aksara, 1987.
M. Y. Wibisono, “Pengaruh Keselamatan Kerja, Kesehatan Kerja dan Kesejahteraan terhadap Produktivitas Karyawan (Studi Kasus pada PT. Wahana Abadi Rayon Purbalingga),” Universitas Muhammadiyah Purwokerto, 2017.
E. Sutrisno, Manajemen Sumber Daya Manusia (Cetakan Ke-8). Jakarta: Kencana Prenada Media Group, 2016.
S. M. Hasibuan, “Pengaruh Kepemimpinan, Lingkungan Kerja dan Motivasi Kerja terhadap Kinerja,” Maneggio J. Ilm. Magister Manaj., vol. 1, no. 1, hal. 71–80, 2018, doi: https://doi.org/10.30596/maneggio.v1i1.2243.
G. K. Gupta, D. Agrawal, R. K. Singh, dan R. K. Arya, “Prevalence, Risk Factors and Socio Demographic Co-Relates of Adolescent Hypertension in District Ghaziabad,” Indian J. Community Heal., vol. 25, no. 3, hal. 293–298, 2013, [Daring]. Tersedia pada: http://www.iapsmupuk.org/journal/index.php/IJCH/article/view/331
V. Gaspersz, Manajemen Kualitas dalam Industri Jasa. Jakarta: Gramedia Pustaka Utama, 2002.
M. Kholil, J. Haekal, A. Suparno, D. Savira, dan T. Widodo, “Lean Six Sigma Integration to Reduce Waste in Tablet Coating Production with DMAIC and VSM Approach in Production Lines of Manufacturing Companies,” Int. J. Sci. Adv. ISSN 2708, vol. 7972, no. 2, hal. 5, 2021, doi: https://doi.org/10.51542/ijscia.v2i5.8.
S. Saryanto, H. H. Purba, dan A. Trimarjoko, “Improve Quality Remanufacturing Welding and Machining Process in Indonesia Using Six Sigma Methods,” J. Eur. Des Syst. Autom., vol. 53, no. 3, 2020, doi: https://doi.org/10.18280/jesa.530308.
M. Alefari, K. Salonitis, dan Y. Xu, “The Role of Leadership in Implementing Lean Manufacturing,” Procedia Cirp, vol. 63, hal. 756–761, 2017, doi: https://doi.org/10.1016/j.procir.2017.03.169.
A.-A. Dadashnejad dan C. Valmohammadi, “Investigating the Effect of Value Stream Mapping on Operational Losses: A Case Study,” J. Eng. Des. Technol., vol. 16, no. 3, hal. 478–500, 2018, doi: https://doi.org/10.1108/JEDT-11-2017-0123.
F. R. Jacobs dan R. Chase, Operations and Supply Chain Management (4th Edition). New York: McGraw-Hill Education, 2016.
H. Prastiyo dan F. A. Ekoanindiyo, “Pengendalian Kualitas Produk Teh Hijau Menggunakan Pendekatan Six Sigma,” Din. Tek. Ind., vol. 8, no. 2, 2014, [Daring]. Tersedia pada: https://www.unisbank.ac.id/ojs/index.php/ft1/article/view/3053
Y. Yuliana, Y. N. Nasution, dan W. Wasono, “Penggunaan Metode Kaizen pada Tahap Improve dalam Six Sigma,” Eksponensial, vol. 8, no. 1, hal. 81–86, 2017, [Daring]. Tersedia pada: http://jurnal.fmipa.unmul.ac.id/index.php/exponensial/article/view/80
N. T. Putri, B. Hidayat, D. Fatrias, dan A. S. Indrapriyatna, “Reducing Bag Defects Using Six Sigma Methodology: A Case Study in A Cement Industry,” in 2018 7th International Conference on Industrial Technology and Management (ICITM), IEEE, 2018, hal. 11–16. doi: https://doi.org/10.1109/ICITM.2018.8333911.
J. Heizer dan B. Render, Operations Management (7th Edition). New Jersey: Pearson Education, 2014.
B. Neyestani, “Seven Basic Tools of Quality Control: The Appropriate Quality Techniques for Solving Quality Problems in the Organizations,” Zenodo, 2017, doi: https://doi.org/10.5281/zenodo.400832.
P. Barosz, M. Dudek-Burlikowska, dan M. Roszak, “The Application of the FMEA Method in the Selected Production Process of a Company,” Prod. Eng. Arch., vol. 18, no. 18, hal. 35–41, 2018, doi: https://doi.org/10.30657/pea.2018.18.06.
J. F. W. Peeters, R. J. I. Basten, dan T. Tinga, “Improving Failure Analysis Efficiency by Combining FTA and FMEA in a Recursive Manner,” Reliab. Eng. Syst. Saf., vol. 172, hal. 36–44, 2018, doi: https://doi.org/10.1016/j.ress.2017.11.024.
S. Bastuti, “Analisis Kegagalan pada Seksi Marking untuk Menurunkan Klaim Internal dengan Mengaplikasikan Metode PDCA,” SINTEK J. J. Ilm. Tek. Mesin, vol. 11, no. 2, hal. 113–122, 2017, [Daring]. Tersedia pada: https://jurnal.umj.ac.id/index.php/sintek/article/view/2103
Downloads
Published
How to Cite
Issue
Section
License
COPYRIGHT POLICY
The author(s) of an article published in the Jurnal Teknologi retains ownership of the intellectual property rights in work (s).
PUBLISHING RIGHTS
The author(s) of an article published in the Jurnal Teknologi have unrestricted publication rights. The authors give the Jurnal Teknologi the right to publish the article and designate the Faculty of Engineering Universitas Muhammadiyah Jakarta Publishing as the original publisher of the article.
LICENSING POLICY
Journal of Mechanical Engineering and Sciences is an open-access journal that follows the Creative Commons Non-Commercial 4.0 International License (CC BY-NC 4.0), which states that:
Under this license, the reusers must give appropriate credit, provide a link to the license, and indicate if changes were made. Users may do so in any reasonable manner, but not in any way that suggests the licensor endorses users or their use.
Please take the time to read the whole license agreement (https://creativecommons.org/licenses/by-nc/4.0/). As long as reusers follow the license conditions, the owner cannot withdraw these freedoms. The following components are included under this license:
Attribution: Users must provide appropriate attribution, including a link to the license, and indicate whether or not they made any modifications. Users are free to do so reasonably, but not in a manner that indicates the licensee approves of their usage.
NonCommercial: Users may not use the material for commercial purposes.
