Implementation of Technology-Based K3 System to Improve Occupational Safety in Companies

Article Sidebar

PDF
Published: Jul 22, 2025
DOI: https://doi.org/10.24853/jurtek.17.2.123-132
Keywords:
Occupational Safety and Health (K3), Technology, Work Accidents, Qualitative Approaches, Case Studies

Main Article Content

Johnson Dongoran
Universitas Kristen Satya Wacana
Gigih Rirudro Dwi Nugroho
Universitas Kristen Satya Wacana

Abstract

Workplace accidents in Indonesia have shown a consistent rise, with 234,270 cases recorded in 2021, emphasizing the need for improved safety measures. This study investigates the impact of implementing technology-based Occupational Safety and Health (OSH) systems at PT. Sinar Makmur Semarang, utilizing a qualitative descriptive approach with interviews and documentation. Findings reveal that while technology like CCTV and personal protective equipment has enhanced safety, challenges such as employee compliance and technological maintenance remain. The study contributes practical recommendations for adopting technology-driven OSH systems and theoretical insights for future research in industrial safety.

Downloads

Download data is not yet available.

Article Details

How to Cite
Dongoran, J., & Dwi Nugroho, G. R. (2025). Implementation of Technology-Based K3 System to Improve Occupational Safety in Companies. Jurnal Teknologi, 17(2), 123–132. https://doi.org/10.24853/jurtek.17.2.123-132
Issue
Vol. 17 No. 2 (2025): Jurnal Teknologi
Section
Articles
Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

COPYRIGHT POLICY

The author(s) of an article published in the Jurnal Teknologi retains ownership of the intellectual property rights in work (s).

PUBLISHING RIGHTS

The author(s) of an article published in the Jurnal Teknologi have unrestricted publication rights. The authors give the Jurnal Teknologi the right to publish the article and designate the Faculty of Engineering Universitas Muhammadiyah Jakarta Publishing as the original publisher of the article.

LICENSING POLICY
Journal of Mechanical Engineering and Sciences is an open-access journal that follows the Creative Commons Non-Commercial 4.0 International License (CC BY-NC 4.0), which states that: 


Under this license, the reusers must give appropriate credit, provide a link to the license, and indicate if changes were made. Users may do so in any reasonable manner, but not in any way that suggests the licensor endorses users or their use.
Please take the time to read the whole license agreement (https://creativecommons.org/licenses/by-nc/4.0/). As long as reusers follow the license conditions, the owner cannot withdraw these freedoms. The following components are included under this license:

Attribution: Users must provide appropriate attribution, including a link to the license, and indicate whether or not they made any modifications. Users are free to do so reasonably, but not in a manner that indicates the licensee approves of their usage.

NonCommercial: Users may not use the material for commercial purposes.

References

Agustina, Fitri, Nachnul Ansori, Trisita Novianti, and Miftakhul Farikha. "Kajian Implementasi Kesehatan dan Keselamatan Kerja dengan Pendekatan Behavior Based Safety." Jurnal Ilmiah Teknik Industri, 2023: 125-134.

Aksa, Azezen Dwi, Donny Fernandez, Toto Sugiarto, and Iffarial Nanda. "Implementasi Sistem Manajemen Kesehatan dan Keselamatan Kerja di Jurusan Teknik Kendaraan Ringan SMK Al-Anhar Bayang." JTPVI: Jurnal Teknologi dan Pendidikan Vokasi Indonesia, 2025: 679-688.

Badan Penyelenggara Jaminan Sosial Ketenagakerjaan (BPJS Ketenagakerjaan). Ele Increase in Work Accidents in Indonesia from 2019-2023. Reporting, Jakarta: Badan Penyelenggara Jaminan Sosial Ketenagakerjaan (BPJS Ketenagakerjaan), 2019-2023.

Choudhry, R. M., D. P. Fang, and S. Mohamed. "The Nature of Safety Culture: A Survey of the State-of-the-Art." Safety Science, 2017: 993-1012. https://doi.org/10.1016/j.ssci.2006.09.003

Dodie, Stanley, Stieven N. Rumokoy, Christopel H. Simanjuntak, Leony A. Wenno, and Fata Nidaul Khasanah. "Evaluasi Penerapan Sistem K3 dalam Pembelajaran Praktek: Studi Kasus pada Prodi Sarjana Terapan Teknik Listrik." Jurnal Kajian Ilmiah, 2025: 55-62.

Haidi. "The Use of Motion Graphics Techniques to Design K3 as a Communication Medium at PT. Terminal Teluk Lamong." Jurnal Teknologi, 2021: 145-152.

Hallowell, M. R., and J. A. Gambatese. "Construction Safety Risk Mitigation through Technological Innovation." Journal of Construction Engineering and Management, 2019: 1-11.

Haslam, R. A., S. A. Hide, and A. Gibb. "Contributing Factors in Construction Accidents." Applied Ergonomics, 2015: 50-57.

Hinze, J., J. Thurman, and A. Wehle. "Leading Indicators of Construction Safety Performance." Safety Science, 2013: 23-28. https://doi.org/10.1016/j.ssci.2012.05.016

Li, R. Y. M., and S. W. Poon. "Construction Safety Overview: From Theory to Practice." Safety Science, 2013: 1-5. https://doi.org/10.1007/978-3-642-35046-7_9

Lubis, Ilwira Fakhrurrazi. "Pelaksanaan Kesehatan dan Keselamatan Kerja dan Jaminan Sosial BPJS Ketenagakerjaan bagi Pekerja di Kantor Notaris." Jurnal Syntax Admiration, 2023: 362-376. https://doi.org/10.46799/jsa.v4i3.563

Mann, S., and A. Saxena. "An Integrated Approach to OSH in the Construction Industry." Journal of Occupational Safety Research, 2020: 55-64.

Mexiwel, Rozi, Heri Wardana, and Achmad Jusuf Zulfikar. "A Systematic Analysis of Occupational Health and Safety Implementation in Reducing Accident Risks on Work-Related Illnesses among Drilling Rig Workers: A Review Article." Teknosains: Jurnal Sains, Teknologi dan Informatika, 2025: 308-314. https://doi.org/10.37373/tekno.v12i2.1592

Murtiana, D. "The Future of Sharia-Based Employment Insurance Agency (BPJS Ketenagakerjaan): Learning from Malaysia." Jurnal Jamsostek, 2023: 48-66. https://doi.org/10.61626/jamsostek.v1i1.7

Nada, Fitria Qotrotun, Hanifa Maher Denny, and Yuliani Setyaningsih. "Implementasi Keselamatan dan Kesehatam Kerja di Puskesmas: Studi Kasus di Kabupaten Pekalongan." Jurnal Manajemen Kesehatan Indonesia, 2020: 98-104. https://doi.org/10.14710/jmki.8.2.2020.98-104

Prasetyo, Fahrudin Sugih, and Budwi Harsono. "Evaluasi Implementasi Sistem Manajemen Keselamatan Konstruksi (SMKK) pada Proyek Waron Hospital." Jurnal Aplikasi Teknik Sipil, 2023: 22-30.

Pratiwi, Putri Dian, Achmad Fauzi, Pramedika Putri Gumelar, Rafi Ramdhani, Aris Sasono, and Tithis Asmoroningtyas. "Program BPJS Ketenagakerjaan dalam Menjamin Keselamatan dan Kesehatan Karyawan (Literature Review)." Jurnal Ilmu Manajemen Terapan, 2023: 112-119.

Tam, C. M., S. X. Zeng, and Z. M. Deng. "Identifying Elements of Poor Construction Safety Management in China." Safety Science, 2014: 569-586. https://doi.org/10.1016/j.ssci.2003.09.001

Teo, E. A. L., and F. Y. Y. Ling. "Developing a Model for Measuring the Effectiveness of Safety Management Systems in the Construction Industry." Journal of Construction Industry, 2016: 299-310.

Wardana, Heri, Rozi Maxiwel, and Achmad Jusuf Zulfikar. "The Impact of Occupational Health and Safety System Implementation of Work-Related Ilnesses among Drilling Rig Workers: A Review Article." Teknosains: Jurnal Sains, Teknologi dan Informatika, 2025: 308-314.

Zhou, W., Y. Goh, and Q. Li. "Analysis of Safety Management Studies in the Construction Industry." Safety Science, 2015: 337-350. https://doi.org/10.1016/j.ssci.2014.10.006