OPTIMASI PRODUKSI CRUDE PALM OIL (CPO) DAN INTI SAWIT (KERNEL) MENGGUNAKAN TEKNIK 2 FASE DI PT. LIL

Article Sidebar

PDF
Published: Feb 7, 2023
DOI: https://doi.org/10.24853/jurtek.15.1.117-121
Keywords:
Sensitivity Analysis Optimization Simplex Method

Main Article Content

Vera Devani
UIN Sultan Syarif Kasim Riau
Yulia Aiza
UIN Sultan Syarif Kasim Riau

Abstract

PT. LIL is one of the companies engaged in the business of managing palm oil into Crude Palm Oil (CPO) and palm kernel oil or Palm Kernel Oil (PKO). The method used in this research is the Simplex Method which is one of the methods in the Linear Program that helps in solving a problem with more than two variables. The purpose of this study is to determine the optimal profit, type and number of products to be produced and to determine the value of sensitivity to the optimum solution achieved. Based on the results of research conducted, it can be concluded that the optimal benefits obtained by PT. LIL is Rp. 11,038.7 per kg by producing Crude Palm Oil (CPO) as much as 1.0776 kg and kernels as much as 0.9224 kg. If there is a change in the objective function coefficient for the base variable, the gain for the CPO and kernel remains optimal if it is greater than 0. If there is a change in the right side of the boundary, an optimal percentage ofcontent is oil loss CPO1.45% and kernel is 0.24%, moisture CPO 0.25% and 6.36% kernel, dirty 0.05% CPO and 6.7% kernel and FFA (Free Fatty Acid) CPO content 0%.

Downloads

Download data is not yet available.

Article Details

How to Cite
Devani, V., & Aiza, Y. (2023). OPTIMASI PRODUKSI CRUDE PALM OIL (CPO) DAN INTI SAWIT (KERNEL) MENGGUNAKAN TEKNIK 2 FASE DI PT. LIL. Jurnal Teknologi, 15(1), 117–121. https://doi.org/10.24853/jurtek.15.1.117-121
Issue
Vol. 15 No. 1 (2023): Jurnal Teknologi
Section
Articles

COPYRIGHT POLICY

The author(s) of an article published in the Jurnal Teknologi retains ownership of the intellectual property rights in work (s).

PUBLISHING RIGHTS

The author(s) of an article published in the Jurnal Teknologi have unrestricted publication rights. The authors give the Jurnal Teknologi the right to publish the article and designate the Faculty of Engineering Universitas Muhammadiyah Jakarta Publishing as the original publisher of the article.

LICENSING POLICY
Journal of Mechanical Engineering and Sciences is an open-access journal that follows the Creative Commons Non-Commercial 4.0 International License (CC BY-NC 4.0), which states that: 


Under this license, the reusers must give appropriate credit, provide a link to the license, and indicate if changes were made. Users may do so in any reasonable manner, but not in any way that suggests the licensor endorses users or their use.
Please take the time to read the whole license agreement (https://creativecommons.org/licenses/by-nc/4.0/). As long as reusers follow the license conditions, the owner cannot withdraw these freedoms. The following components are included under this license:

Attribution: Users must provide appropriate attribution, including a link to the license, and indicate whether or not they made any modifications. Users are free to do so reasonably, but not in a manner that indicates the licensee approves of their usage.

NonCommercial: Users may not use the material for commercial purposes.

References

Anonim, PT. LIL: Tandun, 2019.

Adinegoro, P., Putri, R. R., & Ratnawati, D. E. (2017). Optimasi Biaya Pemenuhan Asupan Gizi pada Makanan bagi Anak-Anak Menggunakan Metode Simpleks Dua Fase. Jurnal Pengembangan Teknologi Informasi dan Ilmu Komputer, I(10), 1110-1113.

Aprilyanti, S., Pratiwi, I., & Basuki, M. (2018). Optimasi Keuntungan Produksi Kemplang Panggang Menggunakan Linear Programming melalui Metode Simpleks. Seminar dan Konferensi Nasional IDEC. Surakarta.

Firmansyah, Panjaitan, D. J., Salayan, M., & Silalahi, A. D. (2018). Pengoptimalan Keuntungan Badan Usaha Karya Tani di Deli Serdang dengan Metode Simpleks. Journal of Islamic Science and Technology, III(1), 18-20.

Heryani, R. O. (2015). Optimasi Produksi Crude Palm Oil (CPO) dan Inti Sawit (Kernel) pada PT. Perkebunan Nusantaravii (Persero) Unit Usaha Rejosari Natar Lampung Selatan. Skripsi Jurusan Agribisnis Universitas Lampung.

Ibnas, R. (2014). Optimalisasi Kasus Pemrograman Linear dengan Metode Grafik dan Simpleks. Jurnal MSA, II(1), 1-6.

Rachman, R. (2017). Optimasi Produksi di Industri Garment dengan Menggunakan Metode Simpleks. Jurnal Informatika, IV(1), 12-13.

Rembun, I. K., & Kassa, M. N. (2016). Maksimisasi Keuntungan Usaha Tani Cabai dan Tomat dengan Kendala Faktor Produksi di Desa Pombewe, Kecamatan Sigi Biromaru, Kabupaten Sigi. e-Jurnal Mitra Sains, IV(2), 13-15.

Sinaga, P. R. (2016). Perancangan Optimasi Produksi Sarung Tangan Menggunakan Linear Programing pada PT. Smart Glove Indonesia. Majalah Ilmiah Informasi dan Teknologi Ilmiah, XI(1), 44-47.

Sitorus, R. (2018). Penentuan dan Pengaruh Waktu Inap Crude Palm Oil (CPO) pada Tangki Timbun terhadap Asam Lemak Bebas (Alb), Kadar Air dan Kadar Kotoran. Skripsi Program D3 Kimia Universitas Sumatera Utara.