ANALISA PEMBENTUKAN FILMWISE MENJADI DROPWISE PADA PENANGKAP UAP JENIS DATAR, SEGITIGA DAN SETENGAH LINGKARAN

Authors

  • Irfan Santosa Universitas Pancasakti Tegal
  • Septian Ade Maulana Universitas Pancasakti Tegal

DOI:

https://doi.org/10.24853/jurtek.14.1.111-118

Keywords:

Filmwise, Dropwise Condensation, Steam Capture Variation

Abstract

This study aims to determine the formation of filmwise to dropwise, calculate heating heat, calculate the mass of evaporation, calculate the heat transfer coefficient of condensation and the Reynold value. The research method is by varying the shape of the steam catcher and measuring the water temperature (T1), steam temperature in the water heater (T2), steam catcher plate temperature (T3), environmental temperature (T4), taking documentation to see the process of forming filmwise to dropwise. The results showed that heating water required 284,705.42 Joules. Evaporation mass 0.13 kg. The condensation heat transfer coefficient for each of the vapor traps is hdatar = 1.2759 W / m2 0K, triangle h = 1.0493 W / m2 0K, h half circle = 1.1095 W / m2 0K. The Reynolds number is the Re value of the flat steam catcher = 4547487.192, the Re value of the triangular steam catcher = 4088577.645, the Re value of the semi-circular steam catcher = 4323144.511. which means that the steam flow is included in the Turbulent flow.

Downloads

Download data is not yet available.

References

Eko Yohanes, Sudjito Soeparman, Eko Siswanto. 2014. Heat Flux Kondensasi pada Media Arang Tempurung Kelapa (Cocos Nurifera). Jurusan Teknik Mesin Fakultas Teknik Universitas Brawijaya.

J.P. Holman. 1997. Perpindahan Kalor. Penerbit Erlangga, Jakarta.

Kamal, Samsul. 1998. Studi Karakteristik Angka Perpindahan Kalor Permukaan Plat Gelombang Untuk Pengembunan Filmwise. Jurnal Media Teknik No 4 Tahun XX November ISSN : 0216-3012.

Khilmi Afandi. 2014. Studi Experimental Sistem Kondensasi Uap Hasil Evaporasi Pada Sistem Desalinasi Tenaga Matahari. Jurusan Teknik Sistem Perkapalan. Institut Teknologi Surabaya. https://docplayer.info/38650405-Studi-eksperimental-sistem-kondensasi-uap-hasil-evaporasi-pada-sistem-desalinasi-tenaga-matahari.html

M.D.Kulkarni, P .L. Puthani, A.T. Patil. 2015. Study of Dropwise Condensation on Teflon Coated Surface. International Advanced Research Journal in Science, Engineering and Technology Vol 2 Issues 9 ISSN : 2393-8021.

Marieke Ahlers. Alexander Buck Emden. Hans Jorg-Bath, 2019. Is dropwise condensation feasible?A review on surface modifications for continuous dropwise condensation and a profitability analysis. Journal of Advanced Research 16 page 1-13. https://doi.org/10.1016/j.jare.2018.11.004.

M. Herry, Travis. 2011. Heat Transfer Rates for Filmwise Dropwise and Superhydrophobic Condensation on Silicon Substrates. Massachusetts Institute of Technology.

Miljkovic, N.; Enright, R.; Wang, E. N. 2012. Effect of Droplet Morphology on Growth Dynamics and Heat Transfer During Condensation on Superhydrophobic anostructured Surfaces. ACS Nano, 6, 1776-1785.

Pandey, Saurabh. 2012. Dropwise and Filmwise Condensation. International Journal of Scientific & Engineering Research Vol 3 Issues 4 ISSN 2229-5518.

Reddy, M. Rama Narasimha, M.Yohan, K.Harshavardhan Reddy. 2012. Heat Transfer Co-Efficient Through Dropwise Condensation and Filmwise Condensation Apparatus. International Journal of Scientific and Research Publications, Volume 2 Issues 2 ISBN : 2250-3153, page 1 s/d 4.

Santosa, Irfan. 2012. Sistem Perpindahan Panas Single Basin Solar Still Dengan Memvariasi Sudut Kemiringan Kaca Penutup. Jurnal Engineering Volume 4, No.1 e-ISSN : 2549-8614, p-ISSN : 2087-3859.

Santosa, Irfan & Mustaqim. 2015. Analisa Filmwise dan Dropwise Hybrid Basin Solar Still. Proseding Seminar Nasional Pangan, Energi dan Lingkungan Universitas Pekalongan. ISBN : 978-602-72221-0-6.

Downloads

Published

2022-01-28

How to Cite

Santosa, I., & Maulana, S. A. (2022). ANALISA PEMBENTUKAN FILMWISE MENJADI DROPWISE PADA PENANGKAP UAP JENIS DATAR, SEGITIGA DAN SETENGAH LINGKARAN. Jurnal Teknologi, 14(1), 111–118. https://doi.org/10.24853/jurtek.14.1.111-118

Issue

Vol. 14 No. 1 (2022): Jurnal Teknologi

Section

Articles

License

COPYRIGHT POLICY

The author(s) of an article published in the Jurnal Teknologi retains ownership of the intellectual property rights in work (s).

PUBLISHING RIGHTS

The author(s) of an article published in the Jurnal Teknologi have unrestricted publication rights. The authors give the Jurnal Teknologi the right to publish the article and designate the Faculty of Engineering Universitas Muhammadiyah Jakarta Publishing as the original publisher of the article.

LICENSING POLICY
Journal of Mechanical Engineering and Sciences is an open-access journal that follows the Creative Commons Non-Commercial 4.0 International License (CC BY-NC 4.0), which states that: 


Under this license, the reusers must give appropriate credit, provide a link to the license, and indicate if changes were made. Users may do so in any reasonable manner, but not in any way that suggests the licensor endorses users or their use.
Please take the time to read the whole license agreement (https://creativecommons.org/licenses/by-nc/4.0/). As long as reusers follow the license conditions, the owner cannot withdraw these freedoms. The following components are included under this license:

Attribution: Users must provide appropriate attribution, including a link to the license, and indicate whether or not they made any modifications. Users are free to do so reasonably, but not in a manner that indicates the licensee approves of their usage.

NonCommercial: Users may not use the material for commercial purposes.