ANALISA HAMBATAN TOTAL KARENA PERUBAHAN BENTUK CHINE PADA KAPAL PATROLI
Main Article Content
Abstract
Downloads
Article Details
COPYRIGHT POLICY
The author(s) of an article published in the Jurnal Teknologi retains ownership of the intellectual property rights in work (s).
PUBLISHING RIGHTS
The author(s) of an article published in the Jurnal Teknologi have unrestricted publication rights. The authors give the Jurnal Teknologi the right to publish the article and designate the Faculty of Engineering Universitas Muhammadiyah Jakarta Publishing as the original publisher of the article.
LICENSING POLICY
Journal of Mechanical Engineering and Sciences is an open-access journal that follows the Creative Commons Non-Commercial 4.0 International License (CC BY-NC 4.0), which states that:
Under this license, the reusers must give appropriate credit, provide a link to the license, and indicate if changes were made. Users may do so in any reasonable manner, but not in any way that suggests the licensor endorses users or their use.
Please take the time to read the whole license agreement (https://creativecommons.org/licenses/by-nc/4.0/). As long as reusers follow the license conditions, the owner cannot withdraw these freedoms. The following components are included under this license:
Attribution: Users must provide appropriate attribution, including a link to the license, and indicate whether or not they made any modifications. Users are free to do so reasonably, but not in a manner that indicates the licensee approves of their usage.
NonCommercial: Users may not use the material for commercial purposes.
References
Avci, A. G. and B. Barlas. (2018). An experimental and numerical study of a highspeed planing craft with full-scale validation. J. Mar. Sci. Technol., vol. 26, no. 5, pp. 617–628, 2018, doi: 10.6119/JMST.201810_26(5).0001.
Basir, N. Bin, Trimulyono, A., Wibawa, A., Santosa, B., Teknik, F., & Diponegoro, U. (2015). Analisa Pengaruh Penggunaan Chine Pada Hambatan Kapal Ikan Tipe Katamaran. Jurnal Teknik Perkapalan, 3(2), 183–192.
Biddison, M. (2003). United States Patent Date of Patent: Chine System For a Boat Hull, 1(12), 14.
Fathuddiin, A., Samuel, Kiryanto, and A. Widyandari. Prediksi Hambatan Kapal dengan Menggunakan Metode Overset Mesh pada Kapal Planing Hull. J. Rekayasa Hijau, vol. 4, no. 1, pp. 24–34, 2020, doi: 10.26760/jrh.v4i1.24-34.
Febrian, C. E., Chrismianto, D., & Rindo, G. (2018). Analisis Hambatan dan Gaya Angkat dari Modifikasi Stephull dengan Variasi Sudut pada Kapal Pilot Boat 15 Meter ALU Menggunakan Metode CFD. Jurnal Teknik Perkapalan, 6(1), 150-159.
Hou G., B. Johnson, J. Degroff, S. Trenor, and J. Michaeli. (2019). Dynamic response modeling of high-speed planing craft with enforced acceleration. Ocean Eng., vol. 192, 2019, doi: 10.1016/j.oceaneng.2019.106493.
ITTC. (2011). Practical Guidelines for Ship CFD Applications. ITTC – Recomm. Proced. Guidel. ITTC, pp. 1–8, 2011.
Launder, B. E. and D. B. Spalding. (1974). The numerical computation of turbulent flows. Comput. Methods Appl. Mech. Eng., vol. 3, no. 2, pp. 269–289, 1974, doi: 10.1016/0045-7825(74)90029-2.
Lotfi, M. Ashrafizaadeh, and R. K. Esfahan. (2015). Numerical investigation of a stepped planing hull in calm water," Ocean Eng., vol. 94, pp. 103–110, 2015, doi: 10.1016/j.oceaneng.2014.11.022.
Maimun, A., Muhammad, A.H., Fitriadhy, A., Zulkhairullah, A., & Vigneshwaran, S. (2006). Effect Of Double Chine On Planing Hull Vessel Performance. Advances In Marine Technology 2006. Universiti Teknologi Malaysia, 121-132.
Pratama, B., Manik, P., & Kiryanto. (2019). Analisa Pengaruh Penggunaan Chine Terhadap Performa Kapal Studi Kasus Pilot Boat 15m Dengan Metode Computational Fluid Dynamics (CFD). Jurnal Teknik Perkapalan, vol. 7, no. 1, Sep. 2019.
Radojcic, D., Zgradic, A., Kalajdzic, M., & Simic, A. (2014). Resistance prediction for hard chine hulls in the pre-planing regime. Polish Maritime Research, 21(2), 9–26.
Samuel, S., D. J. Kim, A. Fathuddiin, and A. F. Zakki, "A Numerical Ventilation Problem on Fridsma hull form using an overset grid system," in 6th International E-Conference on Industrial, Mechanical, Electrical and Chemical Engineering (ICIMECE 2020), 2020, Vol. 1096, No. 1, p. 012041.
Samuel, S., S. Jokosisworo, M. Iqbal, P. Manik, and G. Rindo. (2020). Verifikasi Deep-V Planing Hull Menggunakan Finite Volume Method Pada Kondisi Air Tenang. Teknik, vol. 41, no. 2, pp. 126–133, 2020, doi: 10.14710/teknik.v0i0.29391.
Samuel, S., Trimulyono, A., & Santosa, A. W. B. (2019). Simulasi CFD pada Kapal Planing Hull. Kapal 16(3), 123.
Wibawa, L. A. N., & Diharjo, K. (2019). Desain, Pemilihan Material, dan Faktor Keamanan Stasiun Pengisian Gawai Menggunakan Metode Elemen Hingga. Jurnal Teknologi, 11(2), 97-102.
Widodo, E. S. (2017). Simulasi Penerapan Hull Chine Terhadap Tahanan, Daya Dorong Simulation of Aplicated Hull Chine To Resistance, Power Dan Stability for Patrol Boat Suberko-02. Tugas Akhir Repos. Inst. Teknol. Sepuluh Nop., 2017.