ANALISIS PEMANFAATAN AIR BUANGAN PLTA MUSI UNTUK MEMENUHI KEBUTUHAN AIR IRIGASI KABUPATEN KEPAHIANG DAN BENGKULU TENGAH
DOI:
https://doi.org/10.24853/jurtek.14.1.69-78Keywords:
Outlet Water, Musi Hydroelectric (PLTA), Debit, Water balance, Irrigation Water DemandAbstract
Bengkulu province is an area with high population growth, and it affects water demand, including rice field irrigation water. In a certain period, there was a drought on farming irrigation water in Bengkulu. The Water supply has to be maintained to fullfill the irrigation water demand. Musi Hydroelectric outlet water is one source to fulfill irrigation water demand. it is located at Ujan Mas, Kepahiang regency where the hydroelectric outlet water reaches billions of cubic in a year. Thus, there is potential to optimize rice-field irrigation water demand. The analysis method used in this study is a comparison between fount water supply and rice-field irrigation water demand based on Irrigation Planning Criteria (KP-01) in 1986. The result of the study is monthly water balance charts which illustrate the comparison between the water amount on hydroelectric outlet (PLTA) and irrigation water demand in Kepahiang and Bengkulu Tengah regency. The result of the study shows that outlet water of Musi hydroelectric (PLTA) can fulfill the irrigation water demand in Kepahiang and Bengkulu Tengah regency.Downloads
References
Ajr, E. Q., & Dwirani, F. (2019). Menentukan stasiun hujan dan curah hujan dengan metode polygon thiessen daerah Kabupaten Lebak. Jurnal Lingkungan Dan Sipil, 2(2), 139–146.
Andi Juhana, E., Permana, S., & Farida, I. (2015). Analisis Kebutuhan Air Irigasi Pada Daerah Irigasi Bangbayang Uptd Sdap Leles Dinas Sumber Daya Air dan Pertambangan Kabupaten Garut. Jurnal Konstruksi, Vol. 13 No(ISSN : 2302-7312), 1–28.
Badan Pusat Statistik Provinsi Bengkulu. (2021). Proyeksi Penduduk Kabupaten dan Kota Provinsi Bengkulu 2020. 283.
Bambang, T. (2008). Hidrologi terapan. Beta Offset, Yogyakarta, 59, 50.
BSN. (2015). Standar Nasional Indonesia 2015: 8066 Tata Cara Pengukuran Debit Aliran Sungai Dan Saluran Terbuka Menggunakan Alat Ukur Arus Dan Pelampung. Badan Standardisasi Nasional, 8066.
Direktorat Jendral Sumber Daya Air. (2013). Standar Perencanaa Irigasi. Journal of Chemical Information and Modeling, 53(9), 1689–1699.
Fadli, & Murdiana. (2016). Peran Irigasi dalam Peningkatan Produksi Padi Sawah Kecamatan Meurah Mulian Kabupaten Aceh Utara. In Jurnal Agrifo (Vol. 1, Issue 2, pp. 1–14). Jurnal Agrifo.
Hasibuan, S. (2014). Analisa Kebutuhan Air Irigasi Daerah Irigasi Sawah Kabupaten Kampar. Jurnal APTEK, 3(1), 97–102.
Mudiasa, I. M., Sila Dharma, I. B., & Suputra, I. K. (2017). Pemanfaatan Sumber Daya Air Das Yeh Penet Sebagai Air Irigasi Dan Air Baku Pdam. Jurnal Spektran, 5(1), 28–35. https://doi.org/10.24843/spektran.2017.v05.i01.p04
Nurhayati, & Aminuddin, J. (2016). Pengaruh Kecepatan Angin Terhadap Evapotranspirasi Berdasarkan Metode Penman Di Kebun Stroberi Purbalingga. Elkawnie: Journal of Islamic Science and Technology, 2(1), 21–28. www.jurnal.ar-raniry.com/index.php/elkawnie
Priyonugroho, A. (2014). Analisis Kebutuhan Air Irigasi ( Studi Kasus Pada Daerah Irigasi Sungai Air Keban Daerah Kabupaten Empat Lawang ). Jurnal Teknik Sipil Dan Lingkungan, 2(3), 457–470.
Purwanto, & Ikhsan, J. (2006). Analisis Kebutuhan Air Irigasi pada Daerah Irigasi Bendung Mrican1. Jurnal Ilmiah Semesta Teknika, 9(1), 83–93. http://journal.umy.ac.id/index.php/st/article/view/892
Putra, I. S. (2015). STUDI PENGUKURAN KECEPATAN ALIRAN PADA SUNGAI PASANG SURUT. 16(1), 33–46.
Shalsabillah, H., Amri, K., & Gunawan, G. (2018). ANALISIS KEBUTUHAN AIR IRIGASI MENGGUNAKAN METODE CROPWAT VERSION 8.0 (Studi Kasus Pada Daerah Irigasi Air Nipis Kabupaten Bengkulu Selatan). Jurnal Inersia Oktober, 10(2), 61–68.
Syam’ani. (2016). Membangun Basisdata Spasial Menggunakan ArcGIS 10.3. In Lambung Mangkurat University Press (1st ed.). Lambung Mangkurat University Press. http://eprints.ulm.ac.id/2211/1/BUKU LENGKAP ARCGIS 10.33.pdf
Downloads
Published
How to Cite
Issue
Section
License
COPYRIGHT POLICY
The author(s) of an article published in the Jurnal Teknologi retains ownership of the intellectual property rights in work (s).
PUBLISHING RIGHTS
The author(s) of an article published in the Jurnal Teknologi have unrestricted publication rights. The authors give the Jurnal Teknologi the right to publish the article and designate the Faculty of Engineering Universitas Muhammadiyah Jakarta Publishing as the original publisher of the article.
LICENSING POLICY
Journal of Mechanical Engineering and Sciences is an open-access journal that follows the Creative Commons Non-Commercial 4.0 International License (CC BY-NC 4.0), which states that:
Under this license, the reusers must give appropriate credit, provide a link to the license, and indicate if changes were made. Users may do so in any reasonable manner, but not in any way that suggests the licensor endorses users or their use.
Please take the time to read the whole license agreement (https://creativecommons.org/licenses/by-nc/4.0/). As long as reusers follow the license conditions, the owner cannot withdraw these freedoms. The following components are included under this license:
Attribution: Users must provide appropriate attribution, including a link to the license, and indicate whether or not they made any modifications. Users are free to do so reasonably, but not in a manner that indicates the licensee approves of their usage.
NonCommercial: Users may not use the material for commercial purposes.