Pengaruh Tingkat Penerapan BIM 5D Terhadap Kinerja Biaya Proyek Konstruksi

Imam Sugeng Santoso, Agus Suroso, Mawardi Amin

Abstract


Dalam konstruksi, risiko biasanya permintaan untuk tambahan waktu, biaya, atau kualitas pekerjaan. Perselisihan akan terjadi Jika risiko tidak diselesaikan dengan baik. Dalam perkembangan revolusi industri 4.0, kita dapat menggunakan Building Information Modeling (BIM) untuk meningkatkan efisiensi. BIM adalah tampilan digital mengenai semua informasi bangunan yang telah  terintegrasi dengan periode siklus hidup bangunan. BIM akan mengoptimalkan kinerja proyek konstruksi. Di Indonesia, beberapa konsultan/kontraktor telah menerapkan BIM dalam proyek konstruksi. Penelitian ini untuk  mengetahui serta menganalisis faktor-faktor pada proses penerapan BIM 5D yang berpengaruh terhadap kinerja biaya pelaksanaan proyek konstruksi . Metode yang digunakan dalam penelitian adalah metode deskriptif menggunakan pendekatan Q-method dengan instrumen penelitian closed survey terhadap 53 kontraktor/konsultan yang menggunakan BIM. Hasil yang diperoleh dari indikator 5D BIM ada 5 berpengaruh terhadap  kinerja biaya proyek konstruksi.

Keywords


BIM, BIM 5D, Biaya, Kinerja

Full Text:

PDF

References


Pelatihan Perencanaan Konstruksi dengan Sistem Teknologi Building Information Modeling (BIM). 2018. Pusat Pendidikan dan Pelatihan Sumber Daya Air dan Konstruksi, BPSDM, Kementerian PUPR.

PT. PP (Persero) Tbk. 2019. Digital Mapping as A Civil. Paparan dalam Workshop Penerapan Teknologi Building Information Modeling.

Afsari, K. 2012. Building Information Modeling in Concept Design Stage. ResearchGate.

Arikunto. 2016. Prosedur Penelitian: Suatu Pendekatan Praktik. PT. Rineka Cipta. Jakarta.

Huzaimi Abd Jamil Ahmad & Mohamad Syazli Fathi 2020. Enhancing BIM-Based Information Interoperability: Dispute Resolution from Legal and Contractual Perspectives. American Society of Civil Engineers.

Indraprastha, Aswin., dan Tim. 2018. Panduan BIM Adopsi BIM dalam Organisasi. Institut BIM Indonesia.

Kumar, Ranjit. 2019. Research Methodology. Fifth Edition. E-Book.

Pradeep Kumar & Dr. Om Prakash. 2017. The Role of Laser Scanning Technology Lidar Scanning and Building Information Modeling in Building Construction. International Journal Of Engineering Sciences & Research Technology.

Risnu, Rangga. 2016. Implementasi Otomatisasi Konstruksi pada Industri Konstruksi di Surabaya. Institut Teknologi Sepuluh Nopember. Surabaya.

Seo, Wonkyoung., & Youngcheol Kang. 2020. Performance Indicators for the Claim Management of General Contractors. American Society of Civil Engineers.

Shaari, Nassiriah., Nurul Idayu Amran., Aeni Zuhana Saidin., & Muhammad Khairul Munawwar Ismail. 2019. A Design and Development of a Building Environment 6D-Walkthrough. International Journal Of Interactive Digital Media.

Sugiyono. 2017. Metode Penelitian Kuantitatif, Kualitatif dan R&D. Alfabeta.

Usman Fathoni., Nur Adibah Jalaludi., & Sumi Amarjena Hamim. 2018. Value Engineering in Building Information Modeling for Cost Optimization of Renocation Works: Case Study. Universitas Tenaga Nasional Malaysia. Kajang

Zhou, W., Whyte, J. &Sacks, R. 2012. Construction Safety an Digital Design: A review. Automation in Construction.

Zhuang D, Zhang X, Lu Y, et al. A performance data integrated BIM framework for building life-cycle energy efficiency and environmental optimization design. Autom Constr. 2021;127(December 2020):103712. doi:10.1016/j.autcon.2021.103712

Chen Y, Cai X, Li J, Zhang W, Liu Z. The values and barriers of Building Information Modeling (BIM) implementation combination evaluation in smart building energy and efficiency. Energy Reports. 2022;8:96-111. doi:10.1016/j.egyr.2022.03.075

Borges Viana VL, Marques Carvalho MT. Prioritization of risks related to BIM implementation in brazilian public agencies using fuzzy logic. J Build Eng. 2021;36(June 2020):102104. doi:10.1016/j.jobe.2020.102104

Wang L, Li W, Feng W, Yang R. Fire risk assessment for building operation and maintenance based on BIM technology. Build Environ. 2021;205(July):108188. doi:10.1016/j.buildenv.2021.108188

Alvanchi A, TohidiFar A, Mousavi M, Azad R, Rokooei S. A critical study of the existing issues in manufacturing maintenance systems: Can BIM fill the gap? Comput Ind. 2021;131:103484. doi:10.1016/j.compind.2021.103484

Alavi H, Bortolini R, Forcada N. BIM-based decision support for building condition assessment. Autom Constr. 2022;135(July 2021):104117. doi:10.1016/j.autcon.2021.104117

Li L, Yuan J, Tang M, Xu Z, Xu W, Cheng Y. Developing a BIM-enabled building lifecycle management system for owners: Architecture and case scenario. Autom Constr. 2021;129(June):103814. doi:10.1016/j.autcon.2021.103814

Rad MAH, Jalaei F, Golpour A, Varzande SSH, Guest G. BIM-based approach to conduct Life Cycle Cost Analysis of resilient buildings at the conceptual stage. Autom Constr. 2021;123(October 2020):103480. doi:10.1016/j.autcon.2020.103480

Charef R. The use of Building Information Modelling in the circular economy context: Several models and a new dimension of BIM (8D). Clean Eng Technol. 2022;7:100414. doi:10.1016/j.clet.2022.100414




DOI: https://doi.org/10.24853/jk.14.2.83-92

Refbacks



Jurnal Konstruksia Indexing By:

    


Copyright of Jurnal Konstruksia (e-ISSN:2443-308X, p-ISSN:2086-7352).

 

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License

Powered by Puskom-UMJ