ANALYSIS OF RTRTO60K16 PKX YARN PRODUCTION PROCESS WITH OBJECTIVE MATRIX (OMAX) METHOD

Edi Supriyadi, Junaedi Junaedi, Hanni Oktaviani

Abstract


Productivity improvement research conducted at PT. XYZ with the core problem of minimizing waste and shortening lead time with the Objective Matrix (OMAX) method. The total percentage of product damage from January to October 2019 was 28.42% and the largest percentage of damage occurred in May amounting to 1009.26 bales of production and 33.89 bales of product damage with product damage percentage of 3.36%. The lowest damage occurred in March where the damage percentage was 2.74% with the number of products as much as 945.24 bales and damage struck as much as 25.88 bales. The results of the application using the objective matrix (OMAX) method are obtained that the selected productivity criteria include: Ratio 1 (Utility working hours), Ratio 2 (Electricity energy consumption), Ratio 3 (Labor utility), and Ratio 4 (Defective product) have a red value which means performance is still below standard performance and has not reached the target.


Keywords


Productivity; Waste; Objective Matrix (OMAX)

Full Text:

PDF

References


L. A. Silalahi, Rispianda, and Yuniar, “Usulan Strategi Peningkatan Produktivitas Berdasarkan Hasil Analisis Pengukuran Objective Matrix (OMAX) pada Departemen Produksi Transformer(Studi Kasus di PT. XYZ),” J. Online Inst. Teknol. Nas. Jur. Teh. Ind. No.03, vol. 02, no. Peningkatan Produktivitas, pp. 84–95, 2014.

D. Avianda, Y. Yuniati, and Yuniar, “Strategi Peningkatan Produktivitas di Lantai Produksi Menggunakan Metode Objective Matrix ( OMAX ),” J. Online Inst. Teknol. Nas., vol. 01, no. 04, pp. 202–213, 2014.

D. Surjasa, . A., and E. Irawati, “Pengukuran Kinerja Supply Chain Cv. X Berdasarkan Lima Proses Inti Model Supply Chain Operations Reference (Scor),” J. Ilm. Tek. Ind., vol. 5, no. 1, pp. 28–35, 2018, doi: 10.24912/jitiuntar.v5i1.1774.

P. P. Wardoyo and Y. Hadi, “Peningkatan Produktivitas Umkm Menggunakan Metode Objective Matrix,” J. Ilm. Tek. Ind., vol. 4, no. 1, pp. 1–8, 2017, doi: 10.24912/jitiuntar.v4i1.458.

M. Bahrudin and H. C. Wahyuni, “Pengukuran Produktivitas Kerja Karyawan pada Bagian Produksi dengan Menggunakan Metode Objective Matrix (OMAX) Dan Root Cause Analyze (RCA),” PROZIMA (Productivity, Optim. Manuf. Syst. Eng., vol. 1, no. 2, p. 116, 2018, doi: 10.21070/prozima.v1i2.1299.

M. M. Ulkhaq, D. R. Rasyida, P. Studi, T. Industri, F. Teknologi, and U. Diponegoro, “Aplikasi Seven Tools Dan Analisis 5W + 1H Untuk Mengurangi Cacat Produk Galon : Studi Kasus Di Pt . Berlina , Tbk .,” Unisbank Semarang, pp. 330–338, 2016.

H. Kartika, “Analisis Pengendalian Kualitas Produk CPE Film Dengan Metode Statistical Process Control Pada Pt . MSI,” Ilm. Tek. Ind. Univ. Mercu Buana Jakarta, vol. 1, no. 1, pp. 50–58, 2013, [Online]. Available: digilib.mercubuana.ac.id.

F. Agustina and N. A. Riana, “Analisis Produktivitas dengan Metode Objective Matrix (OMAX) di PT. X,” J. Tek. dan Manaj. Ind., vol. 6, no. 2, pp. 150–158, 2011.

D. Wibisono, “Analisis Produktivitas Dengan Menggunakan Pendekatan Metode Objective Matrix (OMAX) Studi Kasus di PT. XYZ,” JOTI J. Optimasi Tek. Ind., vol. 1, no. 1, pp. 1–7, 2019, [Online]. Available: internal-pdf://0.0.0.208/3423.html.

A. Mail, T. Alisyahbana, A. Saleh, R. Malik, and I. Ibrahim, “Analisis Produktivitas Dengan Metode Objektive Matrix (Omax) Pada Cv. Bintang Jaya,” J. Ind. Eng. Manag., vol. 3, no. 2, p. 48, 2018, doi: 10.33536/jiem.v3i2.234.




DOI: https://doi.org/10.24853/sintek.15.1.59-67

Refbacks

  • There are currently no refbacks.


Copyright (c) 2021 SINTEK JURNAL: Jurnal Ilmiah Teknik Mesin

Powered by Puskom-UMJ