Fiber Cyclone Palm Oil Mill Capacity 45 Tons/Hour

Authors

  • Istianto Budhi Rahardja Politeknik Kelapa Sawit Citra Widya Edukasi
  • Juni Afriani Politeknik Kelapa Sawit Citra Widya Edukasi
  • Ahdiat Leksi Siregar Politeknik Kelapa Sawit Citra Widya Edukasi
  • Daruki Daruki Universitas Mercu Buana
  • Deni Almanda Universitas Muhammadiyah Jakarta
  • Firmansyah Firmansyah Universitas Muhammadiyah Jakarta
  • Anwar Ilmar Ramadhan Universitas Muhammadiyah Jakarta
  • Mohd Hamisa Abdul Hamid University College of Yayasan Pahang

DOI:

https://doi.org/10.24853/jasat.5.2.67-76

Keywords:

fiber cyclone fiber sample analysis

Abstract

The processing of Fresh Fruit Bunches into crude palm oil and palm kernel can be done by starting to boil the Fresh Fruit Bunches until they are ripe, after the Fresh Fruit Bunches are ripe, then separate the bunches from the fiber by going through the slaughtering process, after which the fiber is then chopped and immediately pressed so that the oil comes out. After the oil and fiber are separated, the fiber will go to the fiber cyclone. Fiber cyclone is a device located at the solids station, the main function of the fiber cyclone is to separate the nut and fiber by sucking the fiber using air, through the ducting column and will exit through the air lock and then go to the boiler to be used as fuel. The fiber cyclone has a speed of 10.08 m/s for the velocity box, a vertical column of 6.86 m/s, and 8.57 m/s for the horizontal column. Fiber cyclone has 1 loss point for kernel, what is analyzed is the output of fiber cyclone which is fiber taken from air lock, the standard loss for fiber cyclone is 0.10%.

Downloads

Download data is not yet available.

References

Bagus, Gerardus Bryan Prasojo Putra. 2019. Pengaruh Kecepatan Putaran Kipas Terhadap Kondisi Udara Yang Dihasilkan Air Cooler, Yogyakarta

Damanik, L Finta, Nugroho, RDA Taufik .2017. Analisis Nilai Tambah Cpo (Crude Palm Oil) di Pt. Perkebunan Nusantara III (Persero) Medan (Studi Kasus Pabrik Kelapa Sawit Aek Torop), Medan

Duaja, Made deviana, Elis Kartika, dan DC Fransisca. 2020. Pemanfaatan Limbah Padat Pabrik Kelapa Sawit Dan Pupuk Anorganik Pada Tanaman Kailan (Brassica alboglabra) Di Tanah Bekas Tambang Batu Bara, Jambi, Jurnal Ilmu Pertanian. Vol. 04 No 1 2017

ejurnal.bppt.go.id. 2020. Pengolahan Limbah Cair Pabrik Kelapa Sawit dengan Metode Filtrasi dan Fitoremediasi Menggunakan Tanaman Eceng Gondok (Eichhornia Crassipes). https://ejurnal.bppt.go.id/index.php/JTL/article/view/4012 . Diakses 8 agustus 2021

Fahrizal. 2013. Analisa Penggunaan Blower Memindahkan Kernel Dari Stasiun Olaahan Ke Tangki Penampungan

Iswahyudi, Heri, Mila Lukmana, dan Muhammad Yudha. 2017. Limbah Serabut Kelapa Sawit Sebagai Media Tanam Alternatif Bagi Jamur Tiram Putih (Pleurotus Ostreatus), Kalimantan Selatan

Jalaluddin, Saiful Akmal, Nasrul Za, dan Ishak. 2019. Analisa Profil Aliran Fluida Cair dan Pressure Drop pada Pipa L menggunakan Metode Simulasi Computational Fluid Dynamic (CFD), Aceh, Jurnal TEKNIK KIMIA, 8:2, November 2019, 53-79

Katadata.co.id. 2020. Luas Areal Perkebunan Sawit Di Indonesia. https://databoks.katadata.co.id/datapublish/2020/11/30/luas-areal-perkebunan-sawit-di-indonesia-capai-1460-juta . Diakses 5 agustus 2021

Kurniawan, Arif Dedi, Dodi Yulianto. 2020. Utilization Of Palm Oil Fiber Waste And Recycled Plastic (Polypropylene) As Particle Board Composite Materials (Pemanfaatan Limbah Serat Buah Kelapa Sawit Dan Plastik Daur Ulang (Polypropylene) Sebagai Material Komposit Papan Partikel), Riau, Journal Of Renewable Energy & Mechanics (REM), vol. 03 No. 02 2020 60 – 70

Larasati, Novia, Siti Chasanah, Siti Machmudah, dan Sugeng Mawarni. 2016. Studi Analisa Ekonomi Pabrik CPO(Crude Palm Oil) Dan PKO (Palm Kernel Oil) Dan Buah Kelapa Sawit, Surabaya, Jurnal Teknik ITS, Vol. 5, No. 2 (2016)

Mahfud, Ahmad. 2012. Kajian Pengaruh Pembukaan Blower Damper Pada Dry Separation System.vol.4 No.1(2012):JCWE Edisi Mei 2012

Mariadi, Denny Fachri. 2019. Pengolahan Tandan Buah Segar (TBS) Menjadi Crude Oil Palm Dan Palm Kernel Di Pabrik Kelapa Sawit. PT. Perkebunan Nusantara II Pagar Merbau, Medan

Maulidna, Tri Mawarni. Perhitungan Perolehan Crude Palm Oil (CPO) Pada Proses Pemurnian Di Stasiun Klarifikasi Pabrik Kelapa Sawit (PKS) PTPN II Pagar Merbau, Medan

Muliawan, Arif, Ahamad Yani. 2018. Analisa Head Mayor Dan Minor Pompa Chiller dengan Bukaan Katup Instalasi Pompa Tunggal, Bontang

PMKS Agribaras. 2021. Cara Analisa Sampel Fiber Cyclone Dan Rumus Losses Kernel Di Fiber Cyclone. Sulawesi Barat

Putra, Ismet Eka, Sulaiman,dan Ari Galsha. 2017. Analisa Rugi Aliran (Head Losses) pada Belokan Pipa PVC, Padang

Rahardja, Istianto Budhi. 2019. Modul Kuliah Mekanika Fluida, Bekasi

Selly, Arfah Tri. 2019. Pengaruh Lamanya Penyimpanan Inti Kelapa Sawit Utuh Dan Pecah Terhadap Kenaikan Asam Lemak Bebas Pada Minyak Inti Kelapa Sawit, Medan

thepalmscribe.id.2021. proses pembuatan minyak goreng kelapa sawit. https://thepalmscribe.id/id/proses-pembuatan-minyak-goreng-kelapa-sawit/ . Diakses 8 agustus 2021

Zinergi. 2015. Rumus Volume Tabung dan Luas Permukaan. https://www.zinergi.id/2015/06/rumus-volume-tabung-dan-luas-permukaan.html . Diakses 29 Juli 2021

Rahardja, I. B., Sulistiono, S., & Ramadhan, A. I. (2020). Identification of Palm Oil Mill Throughput Capacity of 60 tons/hour (Case Study at XYZ Palm Oil Mill). Journal of Applied Sciences and Advanced Technology, 2(3), 83-86.

Rahardja, I. B., Afifah, H., Dermawan, Y., Diniardi, E., Ramadhan, A. I., & Siregar, J. P. (2021). Mechanical Properties of Particle board from Empty Palm Fruit with Polyester Resin Adhesive. Journal of Applied Sciences and Advanced Technology, 4(1), 35-42.

Diniardi, E., Yudistirani, S. A., Basri, H., & Ramadhan, A. I. (2021). Analysis of the Effect of Cutting Variables against Surface Hardness. Journal of Applied Sciences and Advanced Technology, 3(3), 81-88.

Downloads

Published

2023-01-04

Issue

Vol. 5 No. 2 (2022): Journal of Applied Sciences and Advanced Technology

Section

Articles

License

COPYRIGHT POLICY

The author(s) of an article published in the Journal of Applied Sciences and Advanced Technology (JASAT) retains ownership of the intellectual property rights in work (s).

PUBLISHING RIGHTS

The author(s) of an article published in the Journal of Applied Sciences and Advanced Technology (JASAT) have unrestricted publication rights. The authors give the Journal of Applied Sciences and Advanced Technology (JASAT) the right to publish the article and designate the Faculty of Engineering Universitas Muhammadiyah Jakarta Publishing as the original publisher of the article.

LICENSING POLICY
JASAT is an open-access journal that follows the Creative Commons Non-Commercial 4.0 International License (CC BY-NC 4.0), which states that: 


Under this license, the reusers must give appropriate credit, provide a link to the license, and indicate if changes were made. Users may do so in any reasonable manner, but not in any way that suggests the licensor endorses users or their use.
Please take the time to read the whole license agreement (https://creativecommons.org/licenses/by-nc/4.0/). As long as reusers follow the license conditions, the owner cannot withdraw these freedoms. The following components are included under this license:

Attribution: Users must provide appropriate attribution, including a link to the license, and indicate whether or not they made any modifications. Users are free to do so reasonably, but not in a manner that indicates the licensee approves of their usage.

NonCommercial: Users may not use the material for commercial purposes.

Most read articles by the same author(s)

1 2 3 4 > >>