Troubleshooting Blow by Pressure High on the Komatsu Bulldozer Unit D375A-6R
DOI:
https://doi.org/10.24853/jasat.2.1.17-20Keywords:
Komatsu D375A-6R, Engine low, Troubleshooting, Blow by pressure highAbstract
PT United Tractors Tbk Loajanan-sanga site backs up a large number of customers, one of which is PT. RCI (RPP Contractors Indonesia) which is engaged in coal mining with the Komatsu D375A-6R unit which is used for dozzing and ripping. From the D375A-6R unit at PT. RCI experienced Troubleshooting on engines which caused Blow by pressure high, which resulted in the engine low power and could not run because the oil engine continuously exited from the oil engine filling hole, if the engine is forced to operate it is feared that the engine oil will run out and the engine components it will experience excessive wear and can also experience jammed which results in the maximum performance of the D375A-6R komatsu unit.Downloads
References
OMM (Operation & Maintenance Manual) Komatsu D375A-6R Serial Number 65001 and up. Form No. TEN00388-00 2010 KOMATSU All Rights Reserved Printed in Japan 01-10.
Shop Manual engine SAA6D170E-5 HPCR EGR SEN00190-04. Shopmanual Komatsu D375A-6R Serial Number 65001and up Copyright 2006 KOMATSU printed in U.S.A Komatsu America corp.
Part Book SAA6D170E-5D-01 S/N 510001-UP
Muhtadin, amri. 2019. Cara kerja turbocharger pada mesin diesel. https://www.autoexpose.org/2015/08/turbocharger-pengertian-dan-cara-kerja.html. (20 juli 2019).
Soesanto. 2019. Air cleaner. https://penambang.com/air-cleaner. (20 juli 2019).
Nasih amin, Muhammad. 2019. Pentingnya tahu rasio kompresi dinamis. https://green-dj2306.blogspot.com/2017/08/pentingny-tahurasio-kompresi-dinamis.html. (20 juli 2019).
H Basri, AI Ramadhan, E Diniardi .2018. Analysis Structure and Function Cooling System on Unit D155A-6. Journal of Applied Sciences and Advanced Technology 1 (2), 49-52
H Basri, E Diniardi, AI Ramadhan. 2016. Optimasi Desain Dimensi Silinder Arm pada Hydraulic Excavator PC 1250-7. Prosiding Semnastek.
H Basri, AI Ramadhan. 2018. Measurement of Hydraulic Pressure Fan Motor in Engine D1551A-6 with Modification Tool Adapter. International Journal of Scientific & Technology Research 7 (8), 249-251
Shop Manual Komatsu D375A-6R SEN05214-01 Serial Number 65001 and up. All Rights Reserved Printed in Japan D375-6R BULLDOZER Form Number. SEN05214-01 2010 KOMATSU All Rights Reserved Printed in Japan.
Downloads
Published
Issue
Section
License
COPYRIGHT POLICY
The author(s) of an article published in the Journal of Applied Sciences and Advanced Technology (JASAT) retains ownership of the intellectual property rights in work (s).
PUBLISHING RIGHTS
The author(s) of an article published in the Journal of Applied Sciences and Advanced Technology (JASAT) have unrestricted publication rights. The authors give the Journal of Applied Sciences and Advanced Technology (JASAT) the right to publish the article and designate the Faculty of Engineering Universitas Muhammadiyah Jakarta Publishing as the original publisher of the article.
LICENSING POLICY
JASAT is an open-access journal that follows the Creative Commons Non-Commercial 4.0 International License (CC BY-NC 4.0), which states that:
Under this license, the reusers must give appropriate credit, provide a link to the license, and indicate if changes were made. Users may do so in any reasonable manner, but not in any way that suggests the licensor endorses users or their use.
Please take the time to read the whole license agreement (https://creativecommons.org/licenses/by-nc/4.0/). As long as reusers follow the license conditions, the owner cannot withdraw these freedoms. The following components are included under this license:
Attribution: Users must provide appropriate attribution, including a link to the license, and indicate whether or not they made any modifications. Users are free to do so reasonably, but not in a manner that indicates the licensee approves of their usage.
NonCommercial: Users may not use the material for commercial purposes.
_2.png)
1.png)
2.png)
