PERBAIKAN SISTEM KERJA OPERATOR PEMILIHAN BATU BERDASARKAN ANALISA POSTUR KERJA

Authors

  • ayu bidiawati Universitas Bung Hatta
  • Yesmizarti Muchtiar Universitas Bung Hatta
  • Lestari Setiawati Universitas Andalas
  • Nilda Tri Putri Program Studi Profesi Insinyur, Universitas Andalas

DOI:

https://doi.org/10.24853/jisi.11.1.99-108

Keywords:

Ergonomi, Metode OWAS, Antropometri

Abstract

Salah satu pengsuplai listrik di Sumatera adalah pembangkitan ombilin, dimana stasiun kerja pemilihan batu menggunakan belt conveyor dengan pekerjaan secara berdiri tanpa menggunakan alat bantu selama 3 sampai 4 jam pengisian dan pekerja sering mengalami kelelahan dan keluhan dalam melakukan pekerjaan tersebut. Untuk meminimasi kelelahan tersebut dirancang alat bantu berupa kursi kerja ergonomis. Penelitian diawali dengan mengidentifikasi keluhan pekerja menggunakan kuisioner Nordic Body Map (NBM) kemudian dilakukan penilaian postur kerja menggunakan metode Ovako Working Posture Analysis System (OWAS)  dengan hasil 1 yang diartikan dibutuhkan perbaikan pekerjaan dimasa datang. Perancangan kursi menggunakan dimensi tubuh antropometri pekerja dilakukan untuk perbaikan postur kerja. 

References

Admanda, H, Oesman, TI & Simanjuntak, RA 2017, ‘Analisis Sikap Kerja Dengan Metode Quick Exposure Check (QEC) Guna Mengeliminir Keluhan Operator’, Jurnal Rekavasi, Volume 5, Nomor 2, ISSN:2338-7750.

Bidiawati, Ayu. Setiawati, Lestari. Kurnia, Yulia. (2018). Tools Design of Bread Production Process to Minimize Musculoskeletal Disorders Based on OCRA Method. International Journal of Engineering & Technology, 7 (2.29) 106-109.

Bintang, Alfin Nur. Dewi, Shanty Kusuma (2017), ‘Analisa Postur Kerja Menggunakan Metode OWAS dan RULA’, Jurnal Teknik Industri, Vol. 18, No. 01, pp 43-54.

Kroemer Karl, et al. (2001). Ergonomics: How to Design for Ease and Efficience. 2nd ed. Prentice Hall of International Series: New Jersey

Randany, M.R. dan Masrofah, I. (2021). Analisis Sistem Kerja dan Postur Tubuh Pekerja Karyawan Bagian Gudang Penyimpanan Beras Menggunakan Metode OWAS. Seminar dan Konferensi Nasional IDEC, ISSN : 2579 - 6429.

Rifqi, M (2019). Analisis Postur Kerja Menggunakan Metode Rapid Entyre Body Assesment (REBA) Avako Working Analysis System (OWAS) dan Job Strain Index (JSI) pada Pekerja Pabrik Kerupuk Restu di Purworejo, Jurnal Rekavasi, Vol.7, No.1, ISSN : 2338-7750, pp 43-50.

Supitra, I, Simanjuntak, RA & Yusuf, M 2018, ‘Perancangan Fasilitas Kerja Pembuatan Emping Melinjo Untuk Mengurangi Keluhan Dengan Standar Nordic Questionnair (SNQ) (Studi Kasus Pada Home Industry Desa Murangan Yogyakarta)’, Jurnal REKAVASI, Volume 6, Nomor 1, ISSN:2338-7750.

Tarwaka, Bachri HA Solichul, dan Sudiajeng Lilik. 2004. Ergonomi untuk Keselamatan Kesehatan Kerja dan Produktivitas. Surakarta: UNIBA PRESS.

Tarwaka 2010, Ergonomi Industri, HARAPAN PRESS, Surakarta.

Downloads

Published

2024-06-13

Issue

Vol. 11 No. 1 (2024): JISI UMJ

Section

Articles

License

COPYRIGHT POLICY

The author(s) of an article published in the JISI UMJ retains ownership of the intellectual property rights in work (s).

PUBLISHING RIGHTS

The author(s) of an article published in the JISI UMJ have unrestricted publication rights. The authors give the JISI UMJ the right to publish the article and designate the Industrial of Engineering Universitas Muhammadiyah Jakarta Publishing as the original publisher of the article.

LICENSING POLICY
Journal of Industrial Engineering and Sciences is an open-access journal that follows the Creative Commons Non-Commercial 4.0 International License (CC BY-NC 4.0), which states that: 


Under this license, the reusers must give appropriate credit, provide a link to the license, and indicate if changes were made. Users may do so in any reasonable manner, but not in any way that suggests the licensor endorses users or their use.
Please take the time to read the whole license agreement (https://creativecommons.org/licenses/by-nc/4.0/). As long as reusers follow the license conditions, the owner cannot withdraw these freedoms. The following components are included under this license:

Attribution: Users must provide appropriate attribution, including a link to the license, and indicate whether or not they made any modifications. Users are free to do so reasonably, but not in a manner that indicates the licensee approves of their usage.

NonCommercial: Users may not use the material for commercial purposes.