VISUALISASI SIMPANGAN GETARAN DENGAN METODE INTERFEROMETRI POLA SPEKEL ELEKTRONIK
DOI:
https://doi.org/10.24853/jurtek.7.2.72-75Keywords:
getaran, interferometry, pola spekel, pola frinji, visualisasiAbstract
Simpangan getaran sebuah membran berupa membran bundar yang bergetar sinusoidal, telah dvisualisasikan dengan menggunakan Metode Interferometri Pola Spekel Elektronik. Pola spekel dari permukaan membran pada saat tidak bergetar dan pada saat sedang bergetar pada frekuensi dan amplitudo tertentu, masing-masing, direkam dengan kamera CCD dan datanya disimpan didalam komputer. Selanjutnya, masing-masing data pola spekel membran yang sedang bergetar tersebut di substraksi dengan data pola spekel membran dalam keadaan diam. Hasil yang diperoleh berupa visualisasi citra spekel simpangan rata-rata permukaan membran yang disertai dengan pola frinji tertentu. Bentuk dari pola frinji yang terjadi bersesuaian dengan pola simpangan getaran yang dialami oleh bagian permukaan membran. Sedangkan jumlah pola frinji yang terjadi bersesuain dengan besarnya simpangan rata-rata yang terjadi. Metode ini mensyaratkan perioda getaran membran jauh lebih pendek dibandingkan waktu perekaman kamera CCD. Dari segi kualitas, metode ini menghasilkan citra tidaklah sebaik atau setajam yang diperoleh dengan Metode Interferometri Holografi.Downloads
References
O.J. Lokberg, Speckle Metrology, ed. R.S. Sirohi, Marcel Dekker Inc., New York, 1993.
Muchiar, Penelitian Visualisasi dan Karakteristik Slip-Band pada Pelat Paduan aluminium
Tipe A5052P, Prosiding ETM.http://www-pnp.physics.ox.ac.uk/~atlas/vibespi/taespi.html, Time Average ESPI for Vibration Measurement.
Downloads
Published
How to Cite
Issue
Section
License
COPYRIGHT POLICY
The author(s) of an article published in the Jurnal Teknologi retains ownership of the intellectual property rights in work (s).
PUBLISHING RIGHTS
The author(s) of an article published in the Jurnal Teknologi have unrestricted publication rights. The authors give the Jurnal Teknologi the right to publish the article and designate the Faculty of Engineering Universitas Muhammadiyah Jakarta Publishing as the original publisher of the article.
LICENSING POLICY
Journal of Mechanical Engineering and Sciences is an open-access journal that follows the Creative Commons Non-Commercial 4.0 International License (CC BY-NC 4.0), which states that:
Under this license, the reusers must give appropriate credit, provide a link to the license, and indicate if changes were made. Users may do so in any reasonable manner, but not in any way that suggests the licensor endorses users or their use.
Please take the time to read the whole license agreement (https://creativecommons.org/licenses/by-nc/4.0/). As long as reusers follow the license conditions, the owner cannot withdraw these freedoms. The following components are included under this license:
Attribution: Users must provide appropriate attribution, including a link to the license, and indicate whether or not they made any modifications. Users are free to do so reasonably, but not in a manner that indicates the licensee approves of their usage.
NonCommercial: Users may not use the material for commercial purposes.