FAKTOR-FAKTOR YANG MEMPENGARUHI TINGKAT PENERAPAN BIM (BUILDING INFORMATION MODELLING) 4D DI BUMN KONSTRUKSI
Abstract
Keywords
Full Text:
PDFReferences
Agirachman, F. A., Putra, I. F., and Angkawijaya, A. (2018). “Initial Study on Building Information Modeling Adoption Urgency for Architecture Engineering and Construction Industry in Indonesia”. MATEC Web of Conferences, Vol. 147, 1-6.
Alhumayn, S., Chinyio, E., and Ndekugri, I. (2017). “The barriers and strategies of implementing BIM in Saudi Arabia”. WIT Transactions on the Built Environment, Vol. 169, 55–67.
Both, P. V. (2012). “Potentials and Barriers for Implementing BIM in the German AEC Market”. Digital Applications in Construction, Vol. 2, 141–148.
Boton, C., and Kubicki, S., and Halin, G. (2015). “4D/BIM simulation for pre-construction and construction scheduling. Multiple levels of development within a single case study”. Creative Construction Conference, June, 500-505.
Charlesraj, V. P. C., and Dinesh, T. (2020). “Status of 4D BIM Implementation in Indian Construction”. Proceedings of the 37th International Symposium on Automation and Robotics in Construction (ISARC), October, 199-206.
Criminale, A., and Langar, S. (2017). “Challenges with BIM Implementation: A Review of Literature”. 53rd ASC Annual International Conference Proceedings, 329–335.
Gledson, B. J., and Greenwood, D. J. (2016). “Surveying the extent and use of 4D BIM in the UK”. ITcon, Vol. 21, 57–71.
Hutama, H. R., dan Sekarsari, J. (2019). “Analisa Faktor Penghambat Penerapan Building Information Modeling Dalam Proyek Konstruksi”. Jurnal Infrastruktur, Vol. 4 No. 1, 25–31.
Prušková, K., and Nývlt, V. (2017). “Issue of Building Information Modelling Implementation into the Czech Republic’s Legislation using the Level of Development”. IOP Conf Ser Mater Sci Eng, Vol. 245 No. 8, 1-8.
S. Heryanto et al. (2020). “Kajian Penerapan Building Information Modelling (BIM) di Industri Jasa Konstruksi Penerapan teknologi informasi dalam proses bangunan gedung (building delivery menggunakan software Information Modellling penting dalam industry jasa konstruksi BIM telah”. Vol 4 No. 2.
Stanley, R., and Thurnell, D. (2014). “The benefits of, and barriers to, implementation of 5D BIM for quantity surveying in New Zealand”. Australasian Journal of Construction Economics and Building, Vol. 14 No. 1, 105–117.
Ullah, K., Lill, I., and Witt, E. (2019). “An Overview of BIM Adoption in the Construction Industry: Benefits and Barriers”. Emerald Reach, Vol. 2,297–303.
Yan, H., and Damian, P. (2017). “Benefits and Barriers of Building Information Modelling. United Kingdom”. Proceedings of the 12th International Conference on Computing in Civil and Building Engineering (ICCCBE XII) & 2008 International Conference on Information Technology in Construction (INCITE 2008), 19-01-2017, 16–18.
Zhou, Y., Yang, Y., and Yang, J. B. (2019). “Barriers to BIM implementation strategies in China,” Engineering, Construction and Architectural Management, Vol. 26 No. 3, 554–574.
DOI: https://doi.org/10.24853/jk.14.1.79-87
Refbacks
- There are currently no refbacks.
Jurnal Konstruksia Indexing By:
Copyright of Jurnal Konstruksia (e-ISSN:2443-308X, p-ISSN:2086-7352).
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License