Assembly of a 9 ton cold storage facility at Masian Grup and Ping Loka Building Sleman Regency Yogyakarta

Ade Hermawan; Achmad Syarifudin; Hendro Sukismo; Basino Basino; Priyantini Dewi; Feby Riyan Extrada

doi:10.24853/sintek.17.1.57-62

Assembly of a 9 ton cold storage facility at Masian Grup and Ping Loka Building Sleman Regency Yogyakarta

Ade Hermawan, Achmad Syarifudin, Hendro Sukismo, Basino Basino, Priyantini Dewi, Feby Riyan Extrada

Abstract

This study examines the assembly process of cold storage for frozen food business with a capacity of 9 tons. The aim of this research is to design and assemble a cold storage with dimensions of 5 m in length, 2.7 m in width, and 2.7 m in height, capable of storing frozen food products at a temperature of -18°C. The components used for the cold storage machine include a semi-hermetic Bitzer compressor, a fin and tube HD type condenser, and a wongso evaporator. The total cost for purchasing materials and assembly services for the cold storage amounts to Rp 164,776,980, including an 11% value-added tax (VAT).

Keywords

cold storage assembly; frozen food business; 9-ton capacity; design and assembly

Full Text:

PDF

References

Kelautan, F. T. (2015). Air Flow Circulation Inside Cold Storage.

Global Cold Chain Alliance. (2016). Global Cold Storage Capacity Report. Diakses pada 8 Oktober 2022 dari www.gcca.org.

Vanesha, B. (2017). Mengenal Cold Storage And Cold Chain Management. Diakses pada Juli 2022 dari http://www.imslogistics.com/mengenal-cold-storage-and-cold-chain-management/

Lesmini, L., & Rizaldy, W. (2021). Studi Perbandingan Prosedur Penanganan Barang Perishable untuk Cold Storage di Pelabuhan dan Bandara Internasional di Jakarta [Comparison Study of Perishable Goods Handling Procedure for Cold Storage at Seaport and International Airport in Jakarta]. Jurnal Manajemen Bisnis Transportasi Dan Logistik (JMBTL), 7(1), 53–64.

Anwar, K. (2010). Efek Beban Pendingin terhadap Performa Sistem Mesin Pendingin [Effect of Cooling Load on the Performance of Cooling Machine System]. Jurnal SMARTek, 8(3), 203.

Ayu, C. C. D. P. (2017). Perancangan Unit Mesin Pendingin (Cold Storage) untuk Produk Karkas Sapi Kapasitas 25 Ton dengan Kombinasi Refrigerasi Kompresi Uap, Refrigerasi Absorpsi, dan Flat Plate Solar Collector di Kabupaten Pamekasan-Madura [Design of Cold Storage Unit for 25-Ton Capacity Beef Carcass Products with a Combination of Vapor Compression Refrigeration, Absorption Refrigeration, and Flat Plate Solar Collector in Pamekasan-Madura Regency].

Fadare, D. A., & Oyewole, O. I. (2018). Design and Construction of a Cold Storage Facility for Preserving Fruits and Vegetables. Journal of Scientific Research and Reports, 17(4), 1-12.

Hasan, S. (2008). Sistem Refrigerasi dan Tata Udara [Refrigeration and Air Conditioning System]. Angewandte Chemie International Edition, 6(11), 951–952.

Hassan, M., & Zahedi, G. (2017). Design and Analysis of a Cold Storage for a Tropical Region. International Journal of Environmental Science and Development, 8(1), 71-75.

Kumar, R., Kumar, P., & Kumar, A. (2019). Design and Development of a Cold Storage for Fruits and Vegetables. International Journal of Mechanical Engineering and Technology, 10(2), 360-371.

Oumarou, A., & Chaves, M. I. (2018). Design and Construction of Cold Storage Rooms for Fruits and Vegetables. International Journal of Applied Engineering Research, 13(7), 5205-5211.

Rahmat, M. R. (2015). Perancangan Cold Storage Untuk Produk Reagen [Design of Cold Storage for Reagent Products]. Jurnal Ilmiah Teknik Mesin Unisma “45” Bekasi, 3(1), 16–30.

Senadeera, W., & Jayasena, H. (2016). Design of a Cold Storage Facility for Perishable Food Products. Journal of Food Engineering, 174, 76-87.

Singh, A., Choudhary, D., & Srivastava, A. (2018). Design and Construction of Cold Storage for Horticultural Produce. International Journal of Current Microbiology and Applied Sciences, 7(4), 2866-2873.

Deva Supriana, P., Dantes, K. R., & Nugraha, I. N. P. (2019). Pengaruh Variasi Fluida Pendingin Terhadap Capaian Suhu Optimal Pada Rancangan Mesin Pendingin Mini Water Chiller [Effect of Cooling Fluid Variation on the Achievement of Optimal Temperature in the Design of Mini Water Chiller Refrigeration System]. Jurnal Pendidikan Teknik Mesin Undiksha, 7(1), 36. https://doi.org/10.23887/jjtm.v7i1.18584

Anshar, M. (2019). Firman_Buku Refrigerasi dan Pengkondisian Udara [Refrigeration and Air Conditioning Book]. (NXPowerLite Copy).

DOI: https://doi.org/10.24853/sintek.17.1.57-62