Heat Transfer Analysis of Sandwich Plate System Application As Insulation Material for Fishing Vessels Hatches by Finite Element Method

Syafiq Ahmad Syauqi; Nur Yanu Nugroho; Didik Hardianto; Ali Azhar

doi:10.24853/sintek.18.1.6-12

Heat Transfer Analysis of Sandwich Plate System Application As Insulation Material for Fishing Vessels Hatches by Finite Element Method

Syafiq Ahmad Syauqi, Nur Yanu Nugroho, Didik Hardianto, Ali Azhar

Abstract

Fish is a highly perishable food due to its suitability as a substrate for the growth of spoilage microbes, particularly bacteria. One method to maintain fish quality and extend its shelf life is preservation through a cooling system, where the duration of effective storage in the hatch is influenced by the quality of the insulation wall. Previous research modified the hatch insulation wall using a rice husk and white cement composition; however, these materials proved neither effective nor efficient in maintaining cooling temperatures. This study aims to determine the effect of heat transfer in a sandwich plate system on cooling time and temperature. Experiments were conducted using three variations in core layer thickness within a stainless steel-polyurethane-stainless steel configuration. The results indicated that at a temperature of 4°C, the maximum cooling times for each core layer thickness variation were as follows: variation 1 (3-20-3mm) lasted 62.5 hours, variation 2 (3-25-3mm) lasted 64 hours, and variation 3 (3-30-3mm) lasted 65.5 hours. The findings demonstrate that an increase in core layer thickness results in a prolonged maintenance of the cooling temperature within the hatch.

Keywords

Fishing Vessel Hatch Insulation; Finite Element Method {FEM]; Heat Transfer; Sandwich Plate System

Full Text:

PDF

References

M. Sivertsvik, W. K. Jeksrud, and J. T. Rosnes, “A review of modified atmosphere packaging of fish and fishery products–significance of microbial growth, activities and safety,” Int. J. Food Sci. Technol., vol. 37, no. 2, pp. 107–127, 2002.

S. I. Ikape, “Fish spoilage in the tropics: A review,” Octa J. Biosci., vol. 5, no. 2, 2017.

L. Sheng and L. Wang, “The microbial safety of fish and fish products: Recent advances in understanding its significance, contamination sources, and control strategies,” Compr. Rev. Food Sci. Food Saf., vol. 20, no. 1, pp. 738–786, 2021.

G. W. Gould, “Methods for preservation and extension of shelf life,” Int. J. Food Microbiol., vol. 33, no. 1, pp. 51–64, 1996.

C. A. M. DeWitt and A. C. Oliveira, “Modified atmosphere systems and shelf life extension of fish and fishery products,” Foods, vol. 5, no. 3, p. 48, 2016.

J. Tavares, A. Martins, L. G. Fidalgo, V. Lima, R. A. Amaral, C. A. Pinto, and J. A. Saraiva, “Fresh fish degradation and advances in preservation using physical emerging technologies,” Foods, vol. 10, no. 4, p. 780, 2021.

J. W. Gaythwaite, Design of Marine Facilities. Engineering for Port and Harbour, 2016.

T. Ask, “Boat design deriving from ethnographic study: a transdisciplinary approach to Malaysian fishing boat design,” Ph.D. dissertation, Middlesex University, 2011.

C. G. Loughran, A. Pillay, J. Wang, A. Wall, and T. Ruxton, “A preliminary study of fishing vessel safety,” J. Risk Res., vol. 5, no. 1, pp. 3–21, 2002.

P. Nasution, S. P. Fitri, and Semin, “Karakteristik Fisik Komposit Sabut Kelapa Sebagai Insulator Palka Ikan,” Berkala Perikanan Terubuk, vol. 42, pp. 82–92, 2014.

R. S. Brown, W. A. Hubert, and S. F. Daly, “A primer on winter, ice, and fish: what fisheries biologists should know about winter ice processes and stream-dwelling fish,” Fisheries, vol. 36, no. 1, pp. 8–26, 2011.

M. D. Neufeld, C. A. Davis, K. D. Cain, N. R. Jensen, S. C. Ireland, and C. Lewandowski, “Evaluation of methods for the collection and fertilization of burbot eggs from a wild stock for conservation aquaculture operations,” J. Appl. Ichthyol., vol. 27, pp. 9–15, 2011.

M. Abidin, A. Baheramsyah, and E. M. Wardhana, “Cooling System Design for Cold Storage of Traditional Fishing Boat Using Insulation from Rice Husk,” Int. J. Mar. Eng. Innov. Res., vol. 3, pp. 34–39, 2018.

American Iron and Steel Institute, Design Guidelines for The Selection and Use of Stainless Steel, 9014th ed., Nickel Institute, 2020.

M. Ashby, ANSYS Granta Edupack (Material property data for engineering materials), 2021.

Y. A. Cengel, Heat Transfer: A Practical Approach, 2nd ed., New York: McGraw-Hill, 2003.

Lloyd’s Register, Rules for the Application of Sandwich Panel Construction to Ship Structure, London, 2021.

A. S. Naiu, Y. Koniyo, S. Nursinar, and F. Kasim, Penanganan dan Pengolahan Hasil Perikanan, 1st ed., Gorontalo: CV. ATHRA SAMUDRA, 2018.

International Organization for Standardization, Ships and Marine Technology - Air-conditioning and Ventilation of Accommodation Spaces - Design and Conditions and Basis of Calculations, Switzerland, 2002.

J. P. Holman, Heat Transfer, 10th ed., New York: McGraw-Hill, 2010.

DOI: https://doi.org/10.24853/sintek.18.1.6-12