The Effect of Sandblasting and Airless Spray Coating Mismatches on The Life of A Steel Building

Article Sidebar

PDF
Published: Jun 1, 2024
DOI: https://doi.org/10.24853/sintek.18.1.55-63

Main Article Content

Nur Siska Faradilla
Universitas Singaperbangsa Karawang
Deri Teguh Santoso
Universitas Singaperbangsa Karawang
Oleh Oleh
Universitas Singaperbangsa Karawang

Abstract

The quality of construction is paramount in ensuring the longevity of steel buildings. A primary cause of reduced lifespan in steel structures is the development of corrosion. To mitigate high corrosion rates, careful consideration must be given to the steel fabrication process, particularly coating. This study employs Fishbone, 4M+1E, and 5W+1H cause-and-effect analysis methods to examine the impact of the coating process on the lifespan of steel building structures. By identifying the root causes of various problem factors, the study offers recommendations and proper implementations to address these issues. Discrepancies in the coating process were identified, and several recommendations were proposed based on the root cause analysis. The findings aim to ensure the estimated lifespan of the steel piperack building structure by preventing premature corrosion. The results indicate that coating defects predominantly stem from human factors, and several repair recommendations are provided based on these findings.

Article Details

How to Cite
[1]
N. S. Faradilla, D. T. Santoso, and O. Oleh, “The Effect of Sandblasting and Airless Spray Coating Mismatches on The Life of A Steel Building”, sintek. jurnal. ilm. teknik. mesin, vol. 18, no. 1, pp. 55–63, Jun. 2024.
Issue
Vol. 18 No. 1 (2024): SINTEK JURNAL
Section
Articles

Creative Commons License

  • Articles published in SINTEK JURNAL are licensed under a Creative Commons Attribution-ShareAlike 4.0 International license. You are free to copy, transform, or redistribute articles for any lawful purpose in any medium, provided you give appropriate credit to the original author(s) and SINTEK JURNAL, link to the license, indicate if changes were made, and redistribute any derivative work under the same license.
  • Copyright on articles is retained by the respective author(s), without restrictions. A non-exclusive license is granted to SINTEK JURNAL to publish the article and identify itself as its original publisher, along with the commercial right to include the article in a hardcopy issue for sale to libraries and individuals.

References

P. O. Akadiri, E. A. Chinyio, and P. O. Olomolaiye, "Design of a sustainable building: A conceptual framework for implementing sustainability in the building sector," Buildings, vol. 2, no. 2, pp. 126-152, 2012.

J. Abed, S. Rayburg, J. Rodwell, and M. Neave, "A Review of the Performance and Benefits of Mass Timber as an Alternative to Concrete and Steel for Improving the Sustainability of Structures," Sustainability, vol. 14, no. 9, p. 5570, 2022.

A. Sev, "How can the construction industry contribute to sustainable development? A conceptual framework," Sustain. Dev., vol. 17, no. 3, pp. 161-173, 2009.

A. M. Kushner and Z. Guan, "Modular design in natural and biomimetic soft materials," Angew. Chem. Int. Ed., vol. 50, no. 39, pp. 9026-9057, 2011.

G. Wei, J. Zhang, M. Usuelli, X. Zhang, B. Liu, and R. Mezzenga, "Biomass vs inorganic and plastic-based aerogels: Structural design, functional tailoring, resource-efficient applications and sustainability analysis," Prog. Mater. Sci., vol. 125, p. 100915, 2022.

J. Plocher dan A. Panesar, "Review on design and structural optimisation in additive manufacturing: Towards next-generation lightweight structures," Mater. Des., vol. 183, p. 108164, 2019.

M. Rabi, R. Shamass, dan K. A. Cashell, "Structural performance of stainless steel reinforced concrete members: A review," Constr. Build. Mater., vol. 325, p. 126673, 2022.

A. Pipinato, "Extending the lifetime of steel truss bridges by cost-efficient strengthening interventions," Struct. Infrastruct. Eng., vol. 14, no. 12, pp. 1611-1627, 2018.

A. A. Freitas dan J. P. De Magalhães, "A review and appraisal of the DNA damage theory of ageing," Mutat. Res. Rev. Mutat. Res., vol. 728, no. 1-2, pp. 12-22, 2011.

R. Pamplona, "Membrane phospholipids, lipoxidative damage and molecular integrity: a causal role in aging and longevity," Biochim. Biophys. Acta - Bioenerg., vol. 1777, no. 10, pp. 1249-1262, 2008.

A. H. Alamri, "Localized corrosion and mitigation approach of steel materials used in oil and gas pipelines–An overview," Eng. Fail. Anal., vol. 116, p. 104735, 2020.

L. Bertolini, B. Elsener, P. Pedeferri, E. Redaelli, dan R. B. Polder, Corrosion of steel in concrete: prevention, diagnosis, repair. John Wiley & Sons, 2013.

J. P. Broomfield, Corrosion of steel in concrete: understanding, investigation and repair. CRC Press, 2023.

U. M. Angst, "Challenges and opportunities in corrosion of steel in concrete," Mater. Struct., vol. 51, no. 1, p. 4, 2018.

G. K. Cole, G. Clark, dan P. K. Sharp, The implications of corrosion with respect to aircraft structural integrity, DSTO Aeronautical and Maritime Research Laboratory, Melbourne, VIC, Australia, p. 0134, 1997.

S. Haefliger dan W. Kaufmann, "Corroded Tension Chord Model: Load‐deformation behavior of structures with locally corroded reinforcement," Struct. Concr., vol. 23, no. 1, pp. 104-120, 2022.

M. I. Firdaus dan R. Adiputra, "Deterioration and imperfection of the ship structural components and its effects on the structural integrity: A review," Curv. Layered Struct., vol. 11, no. 1, p. 20240008, 2024.

V. K. Gouda, "Corrosion and corrosion inhibition of reinforcing steel: I. Immersed in alkaline solutions," Br. Corros. J., vol. 5, no. 5, pp. 198-203, 1970.

H. Tamura, "The role of rusts in corrosion and corrosion protection of iron and steel," Corros. Sci., vol. 50, no. 7, pp. 1872-1883, 2008.

F. Biondini dan D. M. Frangopol, "Life-cycle performance of deteriorating structural systems under uncertainty," J. Struct. Eng., vol. 142, no. 9, p. F4016001, 2016.

D. M. Frangopol, K. Y. Lin, dan A. C. Estes, "Life-cycle cost design of deteriorating structures," J. Struct. Eng., vol. 123, no. 10, pp. 1390-1401, 1997.

F. Hendra dan R. Effendi, "Perhitungan Overall Equipment Effectiveness (OEE) untuk Alat Berat Pemeliharaan Jalan Rel PT. Kereta Api," SINTEK JURNAL: Jurnal Ilmiah Teknik Mesin, vol. 10, no. 1, 2016.

R. Effendi dan F. Faozan, "Modifikasi Konstruksi Dies Lever Comp Brake Motor Matik untuk Meningkatkan Kapasitas Proses Produksi," FLYWHEEL: Jurnal Teknik Mesin Untirta, vol. 2, no. 1, 2017.

F. Hendra dan R. Effendi, "Identifikasi Penyebab Potensial Kecacatan Produk dan Dampaknya dengan Menggunakan Pendekatan Failure Mode Effect Analysis (FMEA)," SINTEK JURNAL: Jurnal Ilmiah Teknik Mesin, vol. 12, no. 1, pp. 17-24, 2018.