Analysis of The Vertical and Horizontal Type Cultivator Claw On The Performance Test of The Power Weeder Machine

Article Sidebar

PDF
Published: Jun 1, 2024
DOI: https://doi.org/10.24853/sintek.18.1.13-18
Keywords:
Horizontal Cultivator Claw Vertical Cultivator Claw Power Weeder Machine

Main Article Content

Angger Bagus Prasetiyo
Institut Teknologi Nasional Yogyakarta
Kartinasari Ayuhikmatin Sekarjati
Institut Sains & Teknologi AKPRIND Yogyakarta

Abstract

Weeds account for approximately 40–65% of rice production losses and affect 15–42% of arable land. If not managed promptly, crop yields could be drastically reduced. Traditional weed control methods, including manual weeding, chemical, semi-mechanical, and mechanical techniques, vary in effectiveness and efficiency. Conventional chemical and semi-mechanical methods are often less effective, costly, time-consuming, and environmentally detrimental. Thus, mechanical weed control presents a superior alternative. This study aims to compare the performance of power weeder machines equipped with vertical and horizontal cultivator claws in terms of weeding time, tool efficiency, and plant damage. The experiment was conducted on 30-day-old rice plants, with each test performed four times over a 1 x 6-meter area, maintaining a muck depth of 20 cm between rice plants. The power weeder machines were equipped with eight claws per unit, a 1.5 HP drive motor, and operated on a mix of oil and petrol fuel. Results indicate that the vertical-type cultivator claw achieved a work efficiency of 72.42%, while the horizontal-type cultivator claw achieved 86.04%. Weeding effectiveness was 93.10% for horizontal claws and 94.77% for vertical claws. Post-weeding, the horizontal cultivator claws caused 14.13% damage to rice plants, compared to 5.73% for vertical claws. Given its high weeding efficiency and minimal plant damage, the vertical type claw cultivator is highly recommended.

Article Details

How to Cite
[1]
A. B. Prasetiyo and K. A. Sekarjati, “Analysis of The Vertical and Horizontal Type Cultivator Claw On The Performance Test of The Power Weeder Machine”, sintek. jurnal. ilm. teknik. mesin, vol. 18, no. 1, pp. 13–18, Jun. 2024.
Issue
Vol. 18 No. 1 (2024): SINTEK JURNAL
Section
Articles

Creative Commons License

  • Articles published in SINTEK JURNAL are licensed under a Creative Commons Attribution-ShareAlike 4.0 International license. You are free to copy, transform, or redistribute articles for any lawful purpose in any medium, provided you give appropriate credit to the original author(s) and SINTEK JURNAL, link to the license, indicate if changes were made, and redistribute any derivative work under the same license.
  • Copyright on articles is retained by the respective author(s), without restrictions. A non-exclusive license is granted to SINTEK JURNAL to publish the article and identify itself as its original publisher, along with the commercial right to include the article in a hardcopy issue for sale to libraries and individuals.

References

Portal PPID Kementerian Pertanian RI, "Portal PPID Kementerian Pertanian RI," Portal PPID Kementerian Pertanian RI, 2020. [Online]. Available: https://ppid.pertanian.go.id/index.php/news/view/1036/portal. [Accessed: Dec. 31, 2023].

D. P. and P. J. Tengah, "Produksi Tanaman Pangan Provinsi Jawa Tengah," eData - Dinas Pertanian dan Perkebunan Jawa Tengah, 2016. [Online]. Available: https://edata.distanbun.jatengprov.go.id/data/detail_cari_atap_tp_produksi. [Accessed: Dec. 31, 2023].

A. Syaifudin and F. A. Nofa, "Types of Rice Weeds (Oryza Sativa L) in Agricultural Land in Terban Village, Warungasem District, Batang Regency, Central Java," Biol. Samudra, vol. 2, no. 2, pp. 128-136, 2020, doi: 10.33059/jbs.v2i1.2959.

R. K. T., S. V. Jogdand, and V. M. Victor, "Field Performance Evaluation of Power Weeder for Paddy Crop," Curr. Agric. Res. J., vol. 6, no. 3, pp. 441-448, 2018, doi: 10.12944/carj.6.3.24.

D. S. Thorat, P. K. Sahoo, D. De, and M. A. Iquebal, "Prototype: A ridge profile mechanical power weeder," AMA, Agric. Mech. Asia, Africa Lat. Am., vol. 48, no. 1, pp. 81-86, 2017.

L. Zhou, Z. Liu, and T. Zhou, "Qualitative Analysis of the Effect of Weeds Removal in Paddy Ecosystems in Fallow Season," Discret. Dyn. Nat. Soc., vol. 2020, pp. 17-19, 2020, doi: 10.1155/2020/8716314.

N. Shimada and S. Sugiura, "Indirect effects of weeds on rice plants via shared heteropteran herbivores," J. Appl. Entomol., vol. 145, no. 1-2, pp. 117-124, 2021, doi: 10.1111/jen.12824.

X. Wang et al., "Temporal variation of SOC storage and crop yield and its relationship - A fourteen year field trial about tillage practices in a double paddy cropping system, China," Sci. Total Environ., vol. 759, p. 143494, 2021, doi: 10.1016/j.scitotenv.2020.143494.

B. S. Chauhan, "Grand Challenges in Weed Management," Front. Agron., vol. 1, no. January, pp. 1-4, 2020, doi: 10.3389/fagro.2019.00003.

A. B. Prasetiyo and K. A. Sekarjati, "Finite Element Simulation of Power Weeder Machine Frame," Indones. J. Comput. Eng. Des., vol. 4, no. 2, pp. 26-34, 2022, doi: 10.35806/ijoced.v4i2.291.

A. B. Prasetiyo et al., "Finite Element Analysis (FEA) of blade weed design using Ansys workbench," Sinergi, vol. 26, no. 3, p. 371, 2022, doi: 10.22441/sinergi.2022.3.012.

A. S. Islam, M. Islam, M. S. Islam, A. L. Rahman, and M. Rahman, "Performance Evaluation of BRRI Power Weeder for Low Land Rice (Oryza sativ L.) Cultivation," Agric., vol. 15, no. 1, pp. 40-48, 2017, doi: 10.3329/agric.v15i1.33427.

S. Pandey, A. K. Verma, A. Sirmour, I. Gandhi, and K. Vishwavidyalaya, "Ergonomical studies on single row power weeder for rice crop," J. Crop Weed, vol. 15, no. 1, pp. 145-150, 2019. [Online]. Available: https://www.cropandweed.com/archives/2019/vol15issue1/15-1-22.pdf.

S. Khandai, A. Tripathi, V. Kumar, and A. K. Kerketta, "Ergonomic Evaluation and Comparison of Existing and Modified Power Weeder," Int. J. Curr. Microbiol. Appl. Sci., vol. 7, no. 12, pp. 2476-2481, 2018, doi: 10.20546/ijcmas.2018.712.281.

V. Imaniasita, T. Liana, and D. S. Pamungkas, "Identifikasi Keragaman dan Dominansi Gulma pada Lahan Pertanaman Kedelai," vol. 4, no. 1, pp. 11-16, 2020, doi: 10.20961/agrotechresj.v4i1.36449.

P. Diwan, R. K. Naik, S. Sonwani, S. Sinha, and Y. K. Kosariya, "Developing situation of mechanical weeding in rice," J. Pharmacogn. Phytochem., vol. 8, no. 6, pp. 438-441, 2019.

H. Tang et al., "Analysis of the Mechanism and Performance Optimization of Burying Weeding with a Self-Propelled Inter Row Weeder for Paddy Field Environments," Appl. Sci., vol. 11, no. 21, p. 9798, 2021, doi: 10.3390/app11219798.

Sirmour and Verma, "Design and development of single row power weeder for rice," J. Crop Weed, vol. 14, no. 1, pp. 163-169, 2018.

J. P. Jamalludin, S. Husain, L. Nunik, and M. R. Muhammad, *Alat Dan Mesin Pertanian*, vol. 3. Makasar: UPT Badan Penerbit Universitas Negeri Makasar, 2019.

E. Hasman, "Rancang Bangun Prototipe Mesin Penyiang Mekanis Pada Lahan Dengan System of Rice Intensification," J. Appl. Agric. Sci. Technol., vol. 3, no. 1, pp. 166-177, 2019.

D. Rahmawati, F. Suharjono, and A. Bahariawan, "Alat Penyiang Gulma Sistem Landak Bermotor," J-Dinamika J. Pengabdi. Masy., vol. 1, no. 1, pp. 43-47, 2016, doi: 10.25047/j-dinamika.v1i1.133.

S. Widiyawati, "Perbandingan Tingkat Keberhasilan Penyiangan Tanaman Padi Berdasaran Hasil Modifikasi Power Weeder Tipe Mc1R," J. Ind. Eng. Manag., vol. 2, no. 1, p. 36, 2017, doi: 10.33536/jiem.v2i1.104.

S. Umar et al., "Pengujian Mesin Tanam Padi Sistim Jajar Legowo (Jarwo Transplanter) Di Lahan Rawa Pasang Surut [Assesment Of Jarwo Transplanter On Tidal Swamp Land]," J. Tek. Pertan. Lampung, vol. 6, no. 1, pp. 63-72, 2017.

S. S. Telaumbanua et al., "Performance Comparison of the Implementations of Single Row Power Weeder (Single Engine) and Multi-Row Power Weeder (Twin-Engine) in Rice Fields," IOP Conf. Ser. Earth Environ. Sci., vol. 1038, no. 1, p. 012061, 2021, doi: 10.1088/1755-1315/1038/1/012061.

D. Hunt, *Farm Power and Machinery Management, Cost Determination*, 10th ed. United States of America: Iowa State University Press, 1995.

S. K. Meena et al., "Development and Performance Evaluation of Solar Operated Power Weeder," Int. Res. J. Eng. Technol., vol. 6, no. 7, pp. 1-5, 2019.

B. R. Kiran, C. M. Krishna, and R. J. Prakash, "Performance and Evaluation of Power Weeder, Wheel Hoe, Star Weeder under Dryland Conditions," Int. J. Curr. Microbiol. Appl. Sci., vol. 7, no. 12, pp. 1669-1675, 2018, doi: 10.20546/ijcmas.2018.712.194.

N. K. S. Kumar and A. P. Mohankumar, "Performance Evaluation of a Power Operated Wetland Weeders for Paddy," Int. J. Curr. Microbiol. Appl. Sci., vol. 8, no. 04, pp. 2266-2272, 2019, doi: 10.20546/ijcmas.2019.804.265.

Keshavalu, B. Patil, V. Raghavendra, and S. Khan, "Performance Evaluation of Wet Land Power Weeder for Paddy," Asian J. Agric. Extension, Econ. Sociol., vol. 18, no. 3, pp. 1-8, 2017, doi: 10.9734/ajaees/2017/34910.

E. L. B. Robert Allen Kepner and R. Bainer, *Principles of Farm Machinery*, 3rd ed. United States of America: Avi Publishing Company, 1973.

I. Dewi, B. F. Langai, and B. U. Supriyanto, "Kapasitas Kerja dan Efisiensi Hand Traktor untuk Pengolahan Tanah di Lahan Rawa Pasang Surut Tipe C dan Lahan Irigasi Setengah Teknis di Kalimantan Selatan," Semin. Nas. Lahan Suboptimal, pp. 978-979, 2020. [Online]. Available: http://www.conference.unsri.ac.id/index.php/lahansuboptimal/article/view/1909.

Y. Zhang and X. Chen, "Soil Disturbance and Cutting Forces of Four Different Sweeps for Mechanical Weeding," Soil Tillage Res., vol. 168, pp. 167-175, 2017, doi: 10.1016/j.still.2017.01.002.

Y. Gursoy and C. Chen, "Evaluation of Inter Row Sweeps With Different Working Widths," Appl. Eng. Agric., vol. 33, no. 3, pp. 307-312, 2017, doi: 10.13031/aea.11947.

Witaningsih, "Perbandingan Kinerja Alat Penyiang Gulma Padi Tipe Semi Mekanis dan Mekanis," Universitas Lampung, 2022.