PERANCANGAN ALAT BANTU UNTUK REMOVE AND INSTALL PISTON STEERING CYLINDER PADA UNIT HD1500-7

Article Sidebar

PDF
Published: Jun 1, 2018
Keywords:
Steering Cylinder Piston Steering Cylinder Rod Cost Minimization

Main Article Content

Hendro Purwono
Universitas Muhammadiyah Jakarta
Rasma Rasma
Universitas Muhammadiyah Jakarta

Abstract

The number of jobs and the duration of the process of replacing the steering cylinder seals (reseal) on the HD1500-7 unit, especially when removing and installing the piston steering cylinder on the rod by a mechanic causes the loss of rental costs and failure to achieve the company's target due to breakdown. The purpose of this study is to design tools to shorten the time and simplify the process in order to minimize the loss of rental costs and more secure. The method used in this research is field survey, interview, and library research. The results obtained after the new tool indicate a time efficiency of 1 hour for one-time processing and can reduce the loss of rental costs of $ 70 (Rp.910.000) and safer for demage and mechanical properties because of the potential slip when the tool is used.

Article Details

How to Cite
[1]
H. Purwono and R. Rasma, “PERANCANGAN ALAT BANTU UNTUK REMOVE AND INSTALL PISTON STEERING CYLINDER PADA UNIT HD1500-7”, sintek. jurnal. ilm. teknik. mesin, vol. 12, no. 1, pp. 47–53, Jun. 2018.
Issue
Vol. 12 No. 1 (2018): SINTEK JURNAL
Section
Articles

Creative Commons License

  • Articles published in SINTEK JURNAL are licensed under a Creative Commons Attribution-ShareAlike 4.0 International license. You are free to copy, transform, or redistribute articles for any lawful purpose in any medium, provided you give appropriate credit to the original author(s) and SINTEK JURNAL, link to the license, indicate if changes were made, and redistribute any derivative work under the same license.
  • Copyright on articles is retained by the respective author(s), without restrictions. A non-exclusive license is granted to SINTEK JURNAL to publish the article and identify itself as its original publisher, along with the commercial right to include the article in a hardcopy issue for sale to libraries and individuals.

References

United Tractors. 2005. Basic Course 1 Hydrolic System. Jakarta: PT United Tractors.

Komatsu. 2015. Sub Manual HD1500-7. Jakarta: Komatsu

United Tractors. 2011. Basic Course Steering System, Jakarta: PT United Tractors.

Effendi, R., Faozan, F., Modifikasi Konstruksi Dies Lever Comp Brake Motor Matik untuk Meningkatkan Kapasitas Proses Produksi, FLYWHEEL: Jurnal Teknik Mesin Untirta, 2017; 3: 20-23.

Hardono. 2008. Pengendalian Mutu Terpadu. Jakarta: PT United Tractors, 2008

Ishikawa, Kaoru, (1968). Guide to Quality Control (Japanese) Asian Productivity Organisation: Gemba No QC Shuho by JUSE Press, Ltd., Tokyo

Kalpakjian, Serope; Steven R. Schmid (2001). Manufacturing Engineering and Technology. Prentice Hall

Moltrecht, Karl Hans (1981), Machine Shop Practice (2 vols) (2nd ed.), New York: Industrial Press