PENDEKATAN KARAKTERISTIK RESPON GETARAN SISTEM 2 DOF SETELAH PENAMBAHAN INDEPENDENT DUAL TRANSLASIONAL DYNAMIC VIBRATION ABSORBER

Susastro Susastro

Abstract


Dual Translational dynamic vibration absorber (dDVA) is two DVA masses that can move in the translational direction and given into the system to reduce system-translation translational vibrations. The research about using dual translational DVA to reduce vibration with the simulation method has been done, but a study about using the experimental method in that study to do validation from the simulation results that never been done. In this research we conducted a study related to the characteristics of 2 DOF system vibration response after the addition of dual translational DVA with an experimental approach and compared the results with simulation results data. Comparison between experiment date and simulation date is done in order to determine the level of error between the two methods. Simulation data is obtained by simulating the existing equations of motion from the study of literature, while the experimental data is obtained from testing with a DVA test with several changes in the frequency of excitation. From this research shows that the vibration characteristics of the experimental results are the same as the characteristics of the vibration of the simulation results, with an average significance level of 91.5%. The error that occurs between the results of the simulation and experiment is caused by the disappearance of some vibrations from the main system to the environment around the system, so that resulting differences result between simulation and experiment.


Keywords


double dynamic vibration absorber; vibration; reduce vibration

Full Text:

PDF

References


Galezia, A. “Parameter Determination of Dynamic Vibration Absorber for Application in Household Equipment”. Machine Dynamic Research. Vol. 40, pp 83-94, 2016

Frahm, H., ‘‘Device for damping vibrations of bodies,’’ U.S. Patent No. 989958, 1909.

Watts, P., ‘‘On a method of reducing the rolling of ship at sea,’’ Transactions of the Institute of

Naval Architects, Vol. 24, pp. 165–190, 1883.

Hartog, J. P. den, Mechanical Vibrations, McGraw-Hill, 1956

Salem, M.H., Performance of a dynamic vibration absorber using a magneto-rheological damper, (2012) International Review of Mechanical Engineering (IREME), 6 (6), pp. 1146-1156

Salem, M.H., Control of a Dynamic Vibration Absorber Using a Magneto-Rheological Damper, (2013) International Review of Mechanical Engineering (IREME), 7 (1), pp. 1146-1156

Megahed, S.M. and AbdEl-Razik, A.K., " Vibration control of two degrees of freedoms system using variable inertia vibration absorbers: Modeling and simulation," Design and Production Department, Faculty of Engineering, Cairo University, Giza 12613, 2010.

Aida Annisa Amin Daman. 2016. The influence of dynamic vibration absorber to reduce vibration of main system with 2-DOF. IECC.

Susastro. “Optimasi Posisi dari Masa SDVA untuk Mereduksi Getran Translasi-Rotasi pda Beam”. ITP Journal. Pp 39-44.

Sun.H.L. 2008. Application of dynamic vibration absorber in structur vibration control under multi frequency harmonics excitation. Applied acoustics. Pp 1361-1367

Kusumadewayanti. Esthi. 2015. Study pengaruh masa dan perubahan lengan momen dual dynamic vibration absorber (DVA)-Independent terhadap respon getaran sistem utama - 2 DOF. Seminar nasional teknik mesin petra DS28-DS34.

Susastro. “Optimizing vibration reduction in 2 dof system with change position of independent translational dual-dynamic vibration absorber”. International Journal of Mechanical Engineering and Technology. Pp 882-892.




DOI: https://doi.org/10.24853/sintek.13.1.1-7

Refbacks

  • There are currently no refbacks.


Copyright (c) 2019 SINTEK JURNAL: Jurnal Ilmiah Teknik Mesin

Powered by Puskom-UMJ