Analisis Overall Equipment Effectiveness (OEE) pada Mesin Caterpillar Type 3512B

Article Sidebar

PDF
Published: Dec 1, 2019
DOI: https://doi.org/10.24853/sintek.13.2.87-96

Main Article Content

Khoirul Hafiz
Politeknik Negeri bengkalis
Erwin Martianis
Politeknik Negeri Bengkalis

Abstract

PT. PLN (Persero) ULPLTD Bagan Besar PLTD Bengkalis where the diesel engine is the prime mover. In this case, the role of engine maintenance is needed so that there are no obstacles in the process of distributing community power, especially for Bengkalis Island. Therefore, it is necessary to identify to measure the level of effectiveness of the work of the machine by using the Overall Equipment Effectiveness (OEE) method. Overall Equipment Effectiveness (OEE) is a method of measuring the overall effectiveness of a production machine that involves measuring the level of effectiveness of time, the level of machine performance, and the level of quality of products produced. Measuring the level of work effectiveness of the Caterpillar Type 3512B engine with the Overall Equipment Effectiveness (OEE) method at PT. PLN (Persero) ULPLTD Bagan Besar PLTD Bengkalis in the December 2018 - March 2019 period the results obtained do not meet the value of the Word Class Ideal OEE with a percentage value below 85%.

Article Details

How to Cite
[1]
K. Hafiz and E. Martianis, “Analisis Overall Equipment Effectiveness (OEE) pada Mesin Caterpillar Type 3512B”, sintek. jurnal. ilm. teknik. mesin, vol. 13, no. 2, pp. 87–96, Dec. 2019.
Issue
Vol. 13 No. 2 (2019): SINTEK JURNAL
Section
Articles

Creative Commons License

  • Articles published in SINTEK JURNAL are licensed under a Creative Commons Attribution-ShareAlike 4.0 International license. You are free to copy, transform, or redistribute articles for any lawful purpose in any medium, provided you give appropriate credit to the original author(s) and SINTEK JURNAL, link to the license, indicate if changes were made, and redistribute any derivative work under the same license.
  • Copyright on articles is retained by the respective author(s), without restrictions. A non-exclusive license is granted to SINTEK JURNAL to publish the article and identify itself as its original publisher, along with the commercial right to include the article in a hardcopy issue for sale to libraries and individuals.

References

Tarigan, I, M. 2015. Penerapan Total Productive Maintenance Pada Pembangkit Listrik Tenaga GAS GT 2.1 Dengan Metode Overall Equipment Effectiveness. Skripsi. Program Pendidikan Sarjana Ekstensi Departemen Teknik Mesin Fakultas Teknik Universitas Sumatera Utara. Medan.

Hendra, F., Effendi, R., Perhitungan Overall Equipment Effectiveness (OEE) untuk Alat Berat Pemeliharaan Jalan Rel PT. Kereta Api, SINTEK JURNAL: Jurnal Ilmiah Teknik Mesin, 2016; 10: 1-9.

Hendra, F., Effendi, R., Identifikasi Penyebab Potensial Kecacatan Produk dan Dampaknya dengan Menggunakan Pendekatan Failure Mode Effect Analysis (FMEA), SINTEK JURNAL: Jurnal Ilmiah Teknik Mesin, 2018; 12: 17-24.

PT. PLN (Persero), 2019. Laporan Bulanan PLTD Tahun 2018 – 2019. PT. PLN (Persero) ULPLTD Bagan Besar PLTD Bengkalis.

Tarigan, I, M. 2015. Penerapan Total Productive Maintenance Pada Pembangkit Listrik Tenaga GAS GT 2.1 Dengan Metode Overall Equipment Effectiveness. Skripsi. Program Pendidikan Sarjana Ekstensi Departemen Teknik Mesin Fakultas Teknik Universitas Sumatera Utara. Medan.

Nakajima, S., Introduction to TPM (Total Productive maintenance), Cambridge: Productivity Press, 1998.

Nasution, AY., Yulianto, S., Ikhsan, N., Implementasi Metode Quality Control Circle untuk Peningkatan Kapasitas Produksi Propeller Shaft di PT XYZ, SINTEK JURNAL: Jurnal Ilmiah Teknik Mesin, 2018; 12: 33–39.