EFFECT OF IGNITION SYSTEM IN MOTORCYCLE TO PERFORMANCE AND EXHAUST GAS EMISSIONS WITH FUEL RON 88, RON 90, AND RON 92

Article Sidebar

PDF
Published: Dec 1, 2020
DOI: https://doi.org/10.24853/sintek.14.2.74-79
Keywords:
TCI CDI HC CO2 CO.

Main Article Content

Eko Julianto
Universitas Muhammadiyah Pontianak
Dony Stiawan
Universitas Muhammadiyah Pontianak
Fuazen Fuazen
Universitas Muhammadiyah Pontianak
Eko Sarwono
Universitas Muhammadiyah Pontianak

Abstract

In the automotive field, the development of motorcycle ignition systems has been able to improve engine performance more fuel efficient. TCI has the advantage of transferring high voltage to the spark plug, the results issued from TCI are greater than the CDI system. To find out the results of motorcycle performance, namely the TCI ignition system and spark plugs on performance and exhaust emissions from motorcycles that use fuels such as Premium Ron 80, Pertalite Ron 90, and Pertamax Ron 92. Fuels that have octane that matches the bicycle motorcycles, in addition to the better performance of motorcycle engines, the fuel consumption is also more economical. In this study there are three variables, namely variations in rpm, performance and exhaust emissions. The results of the study of motorcycles that use the Ron 92 Pertamax fuel have far more torque and power than those that use the Ron 80 premium fuel and the pertalite Ron 90, while the HC levels produced by Ron 80 and 90 fuels tend to increase more than Ron fuel 92 which is between 65 - 228 ppm. CO2 levels were 12.53% while Pertamax was 10.74%, and pertalite was 11.17%, while the CO content produced was small at 3750 rpm resulting CO levels of 0.08 ppm. It can be concluded that the ignition produced is more stable which uses Pertamax fuel compared to using premium and pertalite fuel.

Article Details

How to Cite
[1]
E. Julianto, D. Stiawan, F. Fuazen, and E. Sarwono, “EFFECT OF IGNITION SYSTEM IN MOTORCYCLE TO PERFORMANCE AND EXHAUST GAS EMISSIONS WITH FUEL RON 88, RON 90, AND RON 92”, sintek. jurnal. ilm. teknik. mesin, vol. 14, no. 2, pp. 74–79, Dec. 2020.
Issue
Vol. 14 No. 2 (2020): SINTEK JURNAL
Section
Articles

Creative Commons License

  • Articles published in SINTEK JURNAL are licensed under a Creative Commons Attribution-ShareAlike 4.0 International license. You are free to copy, transform, or redistribute articles for any lawful purpose in any medium, provided you give appropriate credit to the original author(s) and SINTEK JURNAL, link to the license, indicate if changes were made, and redistribute any derivative work under the same license.
  • Copyright on articles is retained by the respective author(s), without restrictions. A non-exclusive license is granted to SINTEK JURNAL to publish the article and identify itself as its original publisher, along with the commercial right to include the article in a hardcopy issue for sale to libraries and individuals.

References

R. Suarez-Bertoa, A. A. Zardini, H. Keuken, and C. Astorga, “Impact of ethanol containing gasoline blends on emissions from a flex-fuel vehicle tested over the Worldwide Harmonized Light duty Test Cycle (WLTC),” Fuel, vol. 143, no. 2015, pp. 173–182, 2015.

Y. Barakat, E. N. Awad, and V. Ibrahim, “Fuel consumption of gasoline ethanol blends at different engine rotational speeds,” Egypt. J. Pet., vol. 25, no. 3, pp. 309–315, 2016.

V. Cruccolini, G. Discepoli, J. Zembi, M. Battistoni, F. Mariani, and C. N. Grimaldi, “Experimental Assessment of a Pressure Wave Charger for Motorcycle Engines,” Energy Procedia, vol. 148, pp. 1254–1261, 2018.

S. Iliev, “A comparison of ethanol and methanol blending with gasoline using a 1-D engine model,” Procedia Eng., vol. 100, no. January, pp. 1013–1022, 2015.

K. J. Waluś, Ł. Warguła, P. Krawiec, and J. M. Adamiec, “The Impact of the Modernization of the Injection-ignition System on the Parameters of Motion of the Motorcycle,” Procedia Eng., vol. 177, pp. 393–398, 2017.

D. Albaladejo-Hernández, F. V. García, and J. Hernández-Grau, “Influence of catalyst, exhaust systems and ECU configurations on the motorcycle pollutant emissions,” Results Eng., vol. 5, no. September 2019, 2020.

J. V. Pastor, J. M. García-Oliver, A. García, and C. Micó, “Combustion improvement and pollutants reduction with diesel-gasoline blends by means of a highly tunable laser plasma induced ignition system,” J. Clean. Prod., p. 122499, 2020.

A. Matamis, M. Richter, S. Lonn, O. Andersson, M. Turner, and L. Luise, “Optical characterization of Methanol Compression-Ignition Combustion in a Heavy- Duty Engine,” Proc. Combust. Inst., vol. PROCI-D-19, pp. 1–9, 2020.

H. S. Banzhaf and M. T. Kasim, “Fuel consumption and gasoline prices: The role of assortative matching between households and automobiles,” J. Environ. Econ. Manage., vol. 95, pp. 1–25, 2019.

R. B. R. da Costa, F. A. Rodrigues Filho, T. A. A. Moreira, J. G. C. Baêta, M. E. Guzzo, and J. L. F. de Souza, “Exploring the lean limit operation and fuel consumption improvement of a homogeneous charge pre-chamber torch ignition system in an SI engine fueled with a gasoline-bioethanol blend,” Energy, vol. 197, 2020.

P. Iodice, G. Langella, and A. Amoresano, “Ethanol in gasoline fuel blends: Effect on fuel consumption and engine out emissions of SI engines in cold operating conditions,” Appl. Therm. Eng., vol. 130, pp. 1081–1089, 2018.

Julianto, Eko. Pengaruh, T. Kompresi, D. Piston, D. Cembung, D. I. Ruang, and P " Suara teknik,um pontianak ,2019.

Purnomo, Bagus Trio. Perbedaan Performa Motor Berbahan Bakar Premium 88 dan Motor Berbahan Bakar Pertamax 92. Teknik Mesin. Fakultas Teknik. Universitas Negeri Semarang 2013.

Saputro, Eko. 2016. Analisis Perbandingan Performa Sepeda Motor Menggunakan Adjustable CDI Limiter dan Unlimiter. Teknik Mesin. Fakultas Teknik. Universitas Negeri Semarang 2016.