NUMERICAL STUDY OF COMPARISON THE EFFECT OF FRICTION AND RESTITUTION COEFFICIENT ON SEPARATION EFFICIENCY OF CYCLONE

Article Sidebar

PDF
Published: Dec 1, 2020
DOI: https://doi.org/10.24853/sintek.14.2.80-84

Main Article Content

Fajar Anggara
Universitas Mercu Buana

Abstract

Numerical modeling of cyclone on separation process was developed to increase the efficiency of collection. In terms of increasing the accuracy, this researsh was conducted to observe comparison in between the effect of coefficient of friction (COF) and restitution (COR) on the effeciency of colection. This reseacrh was using ANSYS 17 to simulate cyclone in 3D geometry. Where the variation of COR was 0,0.5 and 1 while the COF was 0,10,20 and 120. The result shows COR has not correspondence to the efficiency of collection but COF has inverse correspondence. Hence, the more friction on the cyclone surface, the more resistant sand particle to go down.

Article Details

How to Cite
[1]
F. Anggara, “NUMERICAL STUDY OF COMPARISON THE EFFECT OF FRICTION AND RESTITUTION COEFFICIENT ON SEPARATION EFFICIENCY OF CYCLONE”, sintek. jurnal. ilm. teknik. mesin, vol. 14, no. 2, pp. 80–84, Dec. 2020.
Issue
Vol. 14 No. 2 (2020): SINTEK JURNAL
Section
Articles

Creative Commons License

  • Articles published in SINTEK JURNAL are licensed under a Creative Commons Attribution-ShareAlike 4.0 International license. You are free to copy, transform, or redistribute articles for any lawful purpose in any medium, provided you give appropriate credit to the original author(s) and SINTEK JURNAL, link to the license, indicate if changes were made, and redistribute any derivative work under the same license.
  • Copyright on articles is retained by the respective author(s), without restrictions. A non-exclusive license is granted to SINTEK JURNAL to publish the article and identify itself as its original publisher, along with the commercial right to include the article in a hardcopy issue for sale to libraries and individuals.

References

Anggara F, Waluyo J, Rohmat TA, Fauzun, Pranoto I, Suhanan, et al. Simulation and validation of PCM melting in concentric double pipe heat exchanger. AIP Conf Proc. 2018;2001.

Anggara F, Anugrah RA, Pranoto H. Thermal energy storage using horizontal shell-tube heat exchanger: Numerical investigation on temperature variation of HTF. Int J Renew Energy Res. 2019;9(4):2112–7.

Demir S, Karadeniz A, Aksel M. Effects of cylindrical and conical heights on pressure and velocity fields in cyclones. Powder Technol [Internet]. 2016;295:209–17. Available from: http://dx.doi.org/10.1016/j.powtec.2016.03.049

Vångö M, Pirker S, Lichtenegger T. Unresolved CFD–DEM modeling of multiphase flow in densely packed particle beds. Appl Math Model. 2018;56:501–16.

Zeng D, Zhang E, Ding Y, Yi Y, Xian Q, Yao G, et al. Investigation of erosion behaviors of sulfur-particle-laden gas flow in an elbow via a CFD-DEM coupling method. Powder Technol [Internet]. 2018;329(2017):115–28. Available from: https://doi.org/10.1016/j.powtec.2018.01.056

Brar LS, Sharma RP, Elsayed K. The effect of the cyclone length on the performance of Stairmand high-efficiency cyclone. Powder Technol [Internet]. 2015;286:668–77. Available from: http://dx.doi.org/10.1016/j.powtec.2015.09.003

Ganegama Bogodage S, Leung AYT. CFD simulation of cyclone separators to reduce air pollution. Powder Technol [Internet]. 2015;286:488–506. Available from: http://dx.doi.org/10.1016/j.powtec.2015.08.023