OPTIMIZATION OF SURFACE ROUGHNESS IN TURNING S45C CARBON STEEL MATERIAL USING THE TAGUCHI METHOD

Muhammad Fahrudin Haryanto, Deni S Khaerudin

Abstract


The value of minimal surface roughness is the performance to be achieved in the Takisawa TSL-800 lathe. Therefore, it is necessary to adjust the variables of the Takisawa TSL-800 lathe process precisely in order to obtain  a minimal surface roughness response. Determining the proper settings of the Takisawa TSL-800 lathe process variables will result in the expected surface roughness of the workpiece. The variables of the machining process that are varied are spindle speed, feed rate and depth of cut. The experimental design was determined based on the Taguchi method and was in the form of an Orthogonal L9 matrix (33).

Keywords


Takisawa TSL-800; surface roughness; variable.

Full Text:

PDF

References


Marsyahyo, 2003. “Eko, Mesin Perkakas Pemotongan Logam” Bayumedia, Malang.

Nakaminami, M., Tokuma, T., Moriwaki, T., Dan Nakamoto, K. 2007. Optimal Structure Design Methodology for Compound Multiaxis Machine Tool-I-Analysis of Requirements and Specification. Paper Manufacturing Technology Departement. MORI SEIKI CO. LTD.

Kalpakjian, S. dan Steven, R.S. 2001. Manufacture Processes for Engineering Materials. New Jersey. Prentice Hall.

Petropoulos, G., Kechagias, J., Akis, V. I., Dan Maropoulos, S. 2009. Surface Roughness Investigation of a Reinforced Polymer Composite. International Conference on Economic Engineering and Manufacturing Systems.

Zulhendri dan Yusri., 2008. Penggunaan Metode Paameter Taguchi Dalam Mengidentifiksi Kekasaran Permukaan Optimasi Proses Bubut, Jurnal Teknik Mesin, Vol. 5, No.2.

Said Apreza., Zaldy Kurniawan., Muhammad Subhan, Juni 2017. Optimasi Kekasaran Permukaan Proses Pembubutan Baja ST.42 dengan Menggunakan Metode Taguchi, Jurnal Manutech Vol. 9, No.1.

Gupta, A., Singh, H. and Aggrawal A. 2011, Taguchi-Fuzzy Multi Output Optimization (MOO) in High Speed CNC Turning of AISI P-20 Tool Steel. Journal Systems with Applications, Vol. 38, Pp, 6822-6828.

Rochim, T. 2001. Spesifikasi, Metrologi, dan Kontrol Kualitas Geometrik, Bandung. Institut Teknologi Bandung.

Soejanto, I. 2009. Desain Eksperiman dengan Metode Taguchi, Graha Ilmu, Yogyakarta.

Takisawa, TSL-800. Operating Manual Engine Lathe, Tamasima Kurasiki-City, Okayama-PRF, Japan.

Sumitomo Electric Cutting Tools Catalog, 2017-2018. Performance Cutting Tools, Sumitomo Carbide-CBN-Diamond.

Sumitomo Electric Cutting Tools Catalog, 2017-2018. Performance Cutting Tools, Sumitomo Carbide-CBN-Diamond.

Surfcom 1400D. Surface Roughness Measuring, Tokyo Seimitsu CO.LTD.




DOI: https://doi.org/10.24853/sintek.14.2.112-117

Refbacks

  • There are currently no refbacks.


Copyright (c) 2020 SINTEK JURNAL: Jurnal Ilmiah Teknik Mesin

Powered by Puskom-UMJ