OPTIMIZATION OF SURFACE ROUGHNESS IN TURNING S45C CARBON STEEL MATERIAL USING THE TAGUCHI METHOD

Article Sidebar

PDF
Published: Dec 1, 2020
DOI: https://doi.org/10.24853/sintek.14.2.112-117
Keywords:
Takisawa TSL-800 surface roughness variable.

Main Article Content

Muhammad Fahrudin Haryanto
Universitas Mercu Buana
Deni S Khaerudin
Universitas Mercu Buana

Abstract

The value of minimal surface roughness is the performance to be achieved in the Takisawa TSL-800 lathe. Therefore, it is necessary to adjust the variables of the Takisawa TSL-800 lathe process precisely in order to obtain  a minimal surface roughness response. Determining the proper settings of the Takisawa TSL-800 lathe process variables will result in the expected surface roughness of the workpiece. The variables of the machining process that are varied are spindle speed, feed rate and depth of cut. The experimental design was determined based on the Taguchi method and was in the form of an Orthogonal L9 matrix (33).

Article Details

How to Cite
[1]
M. F. Haryanto and D. S. Khaerudin, “OPTIMIZATION OF SURFACE ROUGHNESS IN TURNING S45C CARBON STEEL MATERIAL USING THE TAGUCHI METHOD”, sintek. jurnal. ilm. teknik. mesin, vol. 14, no. 2, pp. 112–117, Dec. 2020.
Issue
Vol. 14 No. 2 (2020): SINTEK JURNAL
Section
Articles

Creative Commons License

  • Articles published in SINTEK JURNAL are licensed under a Creative Commons Attribution-ShareAlike 4.0 International license. You are free to copy, transform, or redistribute articles for any lawful purpose in any medium, provided you give appropriate credit to the original author(s) and SINTEK JURNAL, link to the license, indicate if changes were made, and redistribute any derivative work under the same license.
  • Copyright on articles is retained by the respective author(s), without restrictions. A non-exclusive license is granted to SINTEK JURNAL to publish the article and identify itself as its original publisher, along with the commercial right to include the article in a hardcopy issue for sale to libraries and individuals.

References

Marsyahyo, 2003. “Eko, Mesin Perkakas Pemotongan Logam” Bayumedia, Malang.

Nakaminami, M., Tokuma, T., Moriwaki, T., Dan Nakamoto, K. 2007. Optimal Structure Design Methodology for Compound Multiaxis Machine Tool-I-Analysis of Requirements and Specification. Paper Manufacturing Technology Departement. MORI SEIKI CO. LTD.

Kalpakjian, S. dan Steven, R.S. 2001. Manufacture Processes for Engineering Materials. New Jersey. Prentice Hall.

Petropoulos, G., Kechagias, J., Akis, V. I., Dan Maropoulos, S. 2009. Surface Roughness Investigation of a Reinforced Polymer Composite. International Conference on Economic Engineering and Manufacturing Systems.

Zulhendri dan Yusri., 2008. Penggunaan Metode Paameter Taguchi Dalam Mengidentifiksi Kekasaran Permukaan Optimasi Proses Bubut, Jurnal Teknik Mesin, Vol. 5, No.2.

Said Apreza., Zaldy Kurniawan., Muhammad Subhan, Juni 2017. Optimasi Kekasaran Permukaan Proses Pembubutan Baja ST.42 dengan Menggunakan Metode Taguchi, Jurnal Manutech Vol. 9, No.1.

Gupta, A., Singh, H. and Aggrawal A. 2011, Taguchi-Fuzzy Multi Output Optimization (MOO) in High Speed CNC Turning of AISI P-20 Tool Steel. Journal Systems with Applications, Vol. 38, Pp, 6822-6828.

Rochim, T. 2001. Spesifikasi, Metrologi, dan Kontrol Kualitas Geometrik, Bandung. Institut Teknologi Bandung.

Soejanto, I. 2009. Desain Eksperiman dengan Metode Taguchi, Graha Ilmu, Yogyakarta.

Takisawa, TSL-800. Operating Manual Engine Lathe, Tamasima Kurasiki-City, Okayama-PRF, Japan.

Sumitomo Electric Cutting Tools Catalog, 2017-2018. Performance Cutting Tools, Sumitomo Carbide-CBN-Diamond.

Sumitomo Electric Cutting Tools Catalog, 2017-2018. Performance Cutting Tools, Sumitomo Carbide-CBN-Diamond.

Surfcom 1400D. Surface Roughness Measuring, Tokyo Seimitsu CO.LTD.