OPTIMIZATION OF PROCESS PARAMETERS IN 3D PRINTING FDM BY USING THE TAGUCHI AND GREY RELATIONAL ANALYSIS METHODS

Article Sidebar

PDF
Published: Jun 1, 2021
DOI: https://doi.org/10.24853/sintek.15.1.1-10

Main Article Content

Fatahul Arifin
Teknik Mesin Politeknik Negeri Sriwijaya
Ahmad Zamheri
Teknik Mesin Politeknik Negeri Sriwijaya
Yusuf Dewantoro Herlambang
Teknik Mesin Politeknik Negeri Semarang
Angga Panjy Syahputra
Teknik Mesin Politeknik Negeri Sriwijaya
Icvan Apriansyah
Teknik Mesin Politeknik Negeri Sriwijaya
Franando Franando
Teknik Mesin Politeknik Negeri Sriwijaya

Abstract

The 3D printing technology is one of the technologies that is developing currently. This machine can make products easily, quickly, and precisely. 3D printing is used to print models, prototypes/modeling, teaching aids for education, health support devices, product design, and many more in 3D shapes. Fused Deposition Modeling (FDM) is the most popular among others 3D printing techniques. In simple concept, it does not need maintenance regarding solvents or glue. The spare parts can be found easily and cheaply.  In this research, we create objects by using Autodesk inventor that is called human denture. Then, it converted to G-Code using Simplyfy3D software version 4.1.2. The G-Code data is used in the 3D printer for making the product. We select parameters to print the product. In this study, we find the optimal parameters of the effect of shrinkage and hardness of the product. The 3 parameters are in this study namely; layer height, print speed, temperature print. The material of human denture is filament PLA +. The Taguchi method and Grey analysis are used to analyze the data result. The results of the analysis for optimal parameters are at Layer Height 0.15 mm, Print Speed 25 mm/s, and Print Temperature 210⁰C.

Article Details

How to Cite
[1]
F. Arifin, A. Zamheri, Y. D. Herlambang, A. P. Syahputra, I. Apriansyah, and F. Franando, “OPTIMIZATION OF PROCESS PARAMETERS IN 3D PRINTING FDM BY USING THE TAGUCHI AND GREY RELATIONAL ANALYSIS METHODS”, sintek. jurnal. ilm. teknik. mesin, vol. 15, no. 1, pp. 1–10, Jun. 2021.
Issue
Vol. 15 No. 1 (2021): SINTEK JURNAL
Section
Articles

Creative Commons License

  • Articles published in SINTEK JURNAL are licensed under a Creative Commons Attribution-ShareAlike 4.0 International license. You are free to copy, transform, or redistribute articles for any lawful purpose in any medium, provided you give appropriate credit to the original author(s) and SINTEK JURNAL, link to the license, indicate if changes were made, and redistribute any derivative work under the same license.
  • Copyright on articles is retained by the respective author(s), without restrictions. A non-exclusive license is granted to SINTEK JURNAL to publish the article and identify itself as its original publisher, along with the commercial right to include the article in a hardcopy issue for sale to libraries and individuals.
Author Biographies

Fatahul Arifin, Teknik Mesin Politeknik Negeri Sriwijaya

Teknik Mesin Bidang Kajian Manufaktur, Produk Desain, 3D Printing

Ahmad Zamheri, Teknik Mesin Politeknik Negeri Sriwijaya

Teknik Mesin Bidang Kajian Manufaktur, Produk Desain, 3D Printing

Yusuf Dewantoro Herlambang, Teknik Mesin Politeknik Negeri Semarang

Teknik Mesin Bidang Kajian Manufaktur, Produk Desain, 3D Printing

Angga Panjy Syahputra, Teknik Mesin Politeknik Negeri Sriwijaya

Teknik Mesin Bidang Kajian Manufaktur, Produk Desain, 3D Printing

Icvan Apriansyah, Teknik Mesin Politeknik Negeri Sriwijaya

Teknik Mesin Bidang Kajian Manufaktur, Produk Desain, 3D Printing

Franando Franando, Teknik Mesin Politeknik Negeri Sriwijaya

Teknik Mesin Bidang Kajian Manufaktur, Produk Desain, 3D Printing

References

Ginting, M., Sani A. A., dan AK. Wirda N., dan Astra D. 2019. “Pengaruh Parameter Proses Rapid Prototyping dengan Teknologi Stereolithography terhadap Kekerasan Spesimen Uji”. Jurnal Austenit Vol. 11 No. 2.

Surange, V.G., dan Gharat P.V. 2016. “3D Printing Process Using Fused Deposition Modelling (FDM)”. International Research Journal of Engineering and Technology (IRJET) 2016.

Pristiansyah, H., dan Sugiarto. 2019. “Optimasi Parameter Proses 3D Printing FDM Terhadap Akurasi Dimensi Menggunakan Filament Eflex”. Manutech: Jurnal Teknologi Manufaktur Vol. 11 No. 01 (2019).

Abdilah, H. dan Ulikaryani. 2019. “Aplikasi 3D Printer Fused Deposite Material (FDM) pada Pembuatan Pola Cor”. Sintek Jurnal: Jurnal Ilmiah Teknik Mesin Vol. 13 No. 2.

Satyanarayana, B. dan Prakash K.J. 2015. “Component Replication using 3D Printing Technology”. Procedia Materials Science 10. p.263 – 269.

Mazzanti, V., Malagutti L. dan Mollica F. 2019. “FDM 3D Printing of Polymers Containing Natural Fillers: A Review of their Mechanical Properties” Molecular Diversity Preservation International (MDPI).

Roy, R.K. 2010. “A Primer on the Taguchi Method Second Edition”. USA: Society of Manufacturing Engineers.

Wulandari, A. A., Wuryandari T., dan Ispriyanti D. 2016. “Penerapan Metode Taguchi untuk Kasus Multirespon Menggunakan Pendekatan Grey Relational Analysis dan Principal Component Analysis”. Jurnal Gaussian Vol. 5 No. 4.

Wang, M. W., Arifin F. dan Huang J. Y. 2019. “Optimization of the Micro Molding of a Biconcave Structure”. International Journal of Technology 10(2): 269-279.

Lin, J.L. dan Lin, C.L. 2002. “The Use of Orthogonal Array with Grey Relational Analysis to Optimize the Electrical Discharge Machining Process with Multiple Performance Characteristics”. International Journal of Machine Tools and Manufacture, Vol 42, hal. 237–244.

Lu, H.S., Chang, C.K., Hwang, N.C. dan Chung, C.T. 2009. “Grey Relational Analysis Coupled With Principal Component Analysis For Optimization Design Of The Cutting Parameters In High-Speed End Milling”. J. Mater. Process. Technol. 209: 3808-3817.

Johnson, R.A. dan Wichern D.W. 2007. “Applied Multivariate Statistica Analysis 6th Edition”. USA: Prentice Hall.

Sadana, P.K., dan Ranicarfita S.U. 2018. “Pemanfaatan Teknologi 3D Printing Dalam Proses Desain Produk Gaya Hidup”. Seminar Nasional Sistem Informasi dan Teknologi Informasi (SENSITEK) STMIK Pontianak.

Wang, M.W.; Arifin F., dan Kuo H.L. 2019. “Study on Micromoulding of a High Viewing Angle LED Lens”. Plastich, Rubber and Composites Macromolecular Engineering.

Wang, M.W., Arifin F., dan Vu V.H. 2019. “The Study of Optimal Molding of a LED Lens with Grey Relational Analysis and Molding Simulation”. Periodica Polytechnica Mechanical Engineering 63(4), pp. 278-294.

Soejanto I. 2009, ”Desain Eksperimen Dengan Metode Taguchi”, Graha Ilmu, Yogyakarta.

Sateria, A., Yudo E., dan Zulfitriyanto. 2019. “Optimasi Multirespon Purwarupa Electrical Discharge Machine (EDM) Menggunakan Metode Taguchi-Grey Relational Analysis”, Manutech: Jurnal Teknologi Manufaktur Vol. 11 No.01.