RANCANG BANGUN MESIN PENGIRIS TEMPE OTOMATIS

Authors

  • Hasan Hariri Universitas Pancasila
  • Muhammad Al Fathar Universitas Pancasila
  • Ivan Bachtiar Universitas Pancasila

DOI:

https://doi.org/10.24853/sintek.16.1.30-40

Keywords:

tempe, slicing machine, electric motor

Abstract

Tempe slicer is one of the food industry machines that is still developing, however, in various parts of Indonesia the machine still uses the manual method for slicing tempe as its main raw material. With that, to maximize the production of tempe by developing an automatic tempe slicer to increase the capacity of the tempeh slices. The fabrication process of this machine includes planning, drawing design, frame assembly and others. The manufacture of this automatic tempe slicer goes through various stages such as: measuring, cutting, welding, painting, assembling and testing. The tempe slicer is designed using the main actuation, namely an electric motor and a knife to slice the tempe. This automatic tempe slicer is equipped with a blade driven by a shaft that generates power from an electric motor transmitted by the pulley and v-belt.

Author Biographies

Hasan Hariri, Universitas Pancasila

D3 Teknik Mesin

Muhammad Al Fathar, Universitas Pancasila

D3 Teknik Mesin

Ivan Bachtiar, Universitas Pancasila

D3 Teknik Mesin

References

F. Bastian, E. Ishak, A. . Tawali, and M. Bilang, “Daya Terima dan Kandungan Zat Gizi Formula Tepung Tempe dengan Penambahan Semi Refined Carrageenan (SRC) dan Bubuk Kakao,” J. Apl. Teknol. Pangan,Vol 6.No.2, 2013.

Hadi, S., & Nugroho, Y. A. Rancang Bangun Alat Pengiris Kripik Tempe Studi Khasus : Kelompok Usaha Bersama Bangunharjo. Jurnal Teknik Industri UTY, Vol.1, No.7, 2016.

Effendi, R., Khumaidi, M., Perancangan Mesin Perajang Bawang Serbaguna Menggunakan Motor Listrik dengan Kapasitas 55 Kg/Jam, Jurnal POLIMESIN, 2018; 16: 47-50.

N. Evalina and A. A. Zulfikar, “Pengaturan Kecepatan Putaran Motor Induksi 3 Fasa Menggunakan Programmable logic controller,” J. Electr. Technol., vol. 3, no. 2, pp. 73–80, 2018.

Khurmi, R. S and Gupta J. K, “Textbook of Machine Design,” Eurasia Publ. House LTD., 2015.

G. Pahl, W. Beitz, J. Feldhusen, and K. H. Grote, Engineering design: A systematic approach. 2nd ed, london: Springer, 2007.

Salindeho, R. D., Soukota, J., & Poeng, R. Pemodelan pengujian tarik untuk menganalisis sifat mekanik material. Jurnal J-Ensitec, Vol 3, No. 1, 1–11, 2018.

Effendi, R., Maghfurah, F., Rudiarto, R., Optimization Design of Multifunction Machines for Making 2 Kinds of Animal Feed, JEMMME (Journal of Energy, Mechanical, Material, and Manufacturing Engineering), 2018; 3: 9-112.

K. Sularso and Suga, “Dasar Perencanaan dan Pemilihan Elemen Mesin. Jakarta: Pradnya Paramita, 2013.

Downloads

Published

2022-06-01

How to Cite

Hariri, H., Fathar, M. A., & Bachtiar, I. (2022). RANCANG BANGUN MESIN PENGIRIS TEMPE OTOMATIS. SINTEK JURNAL: Jurnal Ilmiah Teknik Mesin, 16(1), 30–40. https://doi.org/10.24853/sintek.16.1.30-40

Issue

Vol. 16 No. 1 (2022): SINTEK JURNAL

Section

Articles

License

Creative Commons License

  • Articles published in SINTEK JURNAL are licensed under a Creative Commons Attribution-ShareAlike 4.0 International license. You are free to copy, transform, or redistribute articles for any lawful purpose in any medium, provided you give appropriate credit to the original author(s) and SINTEK JURNAL, link to the license, indicate if changes were made, and redistribute any derivative work under the same license.
  • Copyright on articles is retained by the respective author(s), without restrictions. A non-exclusive license is granted to SINTEK JURNAL to publish the article and identify itself as its original publisher, along with the commercial right to include the article in a hardcopy issue for sale to libraries and individuals.