Analysis Structure and Function Cooling System on Unit D155A-6

Main Article Content

Hasan Basri
Anwar Ilmar Ramadhan
Ery Diniardi

Abstract

As time went on many problems were encountered in the unit, one of which was the problem experienced by the D155A-6 unit, which was overheating troubleshooting caused by abnormal fan motors. In handling the problem, it is difficult to determine the data of the motor fan. Therefore, an initiative is needed to create tools to help deal with problems that occur. The purpose of this study is the manufacture of adapter tools for measurement of hydraulic pressure fan motors in troubleshooting the overheat engine in D155A-6 units. The results of this study are analyzing the structure and function of the cooling system in troubleshooting the overheat engine in the D155A-6 unit.

Downloads

Download data is not yet available.

Article Details

Section
Articles
Author Biographies

Hasan Basri, Universitas Muhammadiyah Jakarta

Department of Automotive and Heavy Equipment

Anwar Ilmar Ramadhan, Universitas Muhammadiyah Jakarta

Mechanical Engineering

Ery Diniardi, Universitas Muhammadiyah Jakarta

Mechanical Engineering

References

Basri, H.,Rasma, Ramadhan, A.I., Diniardi, E., 2017, Analisa Kerusakan Alternator Semi Konduktor Regulator Pada Charging System Pada Unit Dump Truck 465-5, Prosiding Semnastek

Rasma, Basri, H., Ramadhan, A. I., 2013, Analisa Pengaruh Tekanan Terhadap Steering Control Valve Alat Berat Pada Unit Grader (GD) Tipe 621R-1, Prosiding Seminar Inovasi Teknologi dan Rekayasa Industri 2013

Purwono, H, Rasma, 2017, Analisa Engine Overheat Pada Unit Komatsu Bulldozer D155A-6, Prosiding Semnastek

Part Book, KOMATSU D155A-6. PT. United Tractors Tbk.

Kamsar. Hasbi, Muhammad. Rachman, Aditya, 2016. Analisis Sistem Hidrolik Pengangkat Pada Alat Berat Jenis Wheel Loader Studi Kasus Dinas Pekerjaan Umum Kab. Bombana, DINAMIKA – Jurnal Ilmiah Teknik Mesin,Vol. 1 No. 1.

Mulyanto, S., 2018, Analisa Fan Control Declinepada Unit AlatBerat Bulldozer Komatsu D375-6, DINAMIKA – Jurnal Ilmiah Teknik Mesin, Vol 9 No 2

Basic Competency 1 TC, Hydraulic System. PT. United Tractors Tbk.

Purwono, H, dan Rasma, 2017, Analisa Engine Overheat Pada Unit Komatsu Bulldozer D155A-6, Prosiding Semnastek

Diniardi, E., Ramadhan, A. I., Basri, H., 2014, Analisis Kekuatan Mekanik Dan Struktur Mikro Pada Material Polimer Penyusun Kipas Radiator, Jurnal Teknologi, Vol 6 No 1

Nugrahanto, I., 2016, Analisis Monitoring Pelumas Hidrolik Wheel Loader, Jurnal Ilmiah - VIDYA, Vol. 24 No. 2

Most read articles by the same author(s)

1 2 3 > >>