PERANCANGAN TATA LETAK WAREHOUSE BARU UNTUK MENINGKATKAN KAPASITAS PENYIMPANAN MATERIAL DENGAN METODE DEDICATED STORAGE DI PT.XX

Authors

  • Ucok Mulyo Sugeng Program Studi Teknik Industri, Institut Sains dan Teknologi Nasional

DOI:

https://doi.org/10.24853/jisi.3.1.23-28

Keywords:

Instrument cluster, warehouse, layout

Abstract

PT.XX is an industrial manufacturing company engaged in the assembly of instrument clusters for motorcycles. Increased production capacity in 2015 PT.XX previously as many as 2500 units / day to 3,000 units / day impact on the increase in the number of materials that are stored in the warehouse. Problems that occur in the warehouse PT.XX is not able to accommodate the material to be produced, so that the placement of the material is done by not according to standard. Therefore it is necessary for the removal of material from the old warehouse to the new warehouse. In designing the layout for the new warehouse authors consider the following points, namely: Standart material storage, warehouse area calculation, the determination of the amount of material, the required number of pallets and pallet layout aims to maximize storage and easy retrieval of material. After relayout, warehouse capacity increased 31.7% from the previous, and storage of materials in accordance with company standards.

Author Biography

Ucok Mulyo Sugeng, Program Studi Teknik Industri, Institut Sains dan Teknologi Nasional

Program Studi Teknik Industri, Institut Sains dan Teknologi Nasional

References

Haddiguna, R.A dan H. Setiawan. 2008. Tata Letak Pabrik. Penerbit Andi. Yogyakarta

Apple, James M.1990. Tata Letak Pabrik dan Pemindahan Bahan. Edisi Ketiga.Penerbit ITB, Bandung.

Wignjosoebroto, Sritomo. 2009. Tata Letak Pabrik dan Pemindahan Bahan. Penerbit Guna Widya, Surabaya.

Frazelle, E.H. 2002. Word Class Warehousing and Material Handling. McGraw Hill.NewYork

Harmon, L Roy.1993.Warehouse Management System.3th Edition. Prentice Hall,New Jersey

Heizer, Jay dan Barry Render. 1996. Production and Operating Management, 4th Edition

Mulcahy, David E. 1994. Warehouse Distribution and Operation Handbook. McGraw-Hill, Inc.Singapore

Prasetyo, Anindito Adi. 2011. Perancangan Tata Letak dan Sistem Informasi Gudang Obat PT. XY. Tugas Ahir Sarjana Teknik Industri Universitas Diponegoro. Semarang

Downloads

Published

2017-11-23

Issue

Vol. 3 No. 1 (2016): JISI UMJ

Section

Articles

License

COPYRIGHT POLICY

The author(s) of an article published in the JISI UMJ retains ownership of the intellectual property rights in work (s).

PUBLISHING RIGHTS

The author(s) of an article published in the JISI UMJ have unrestricted publication rights. The authors give the JISI UMJ the right to publish the article and designate the Industrial of Engineering Universitas Muhammadiyah Jakarta Publishing as the original publisher of the article.

LICENSING POLICY
Journal of Industrial Engineering and Sciences is an open-access journal that follows the Creative Commons Non-Commercial 4.0 International License (CC BY-NC 4.0), which states that: 


Under this license, the reusers must give appropriate credit, provide a link to the license, and indicate if changes were made. Users may do so in any reasonable manner, but not in any way that suggests the licensor endorses users or their use.
Please take the time to read the whole license agreement (https://creativecommons.org/licenses/by-nc/4.0/). As long as reusers follow the license conditions, the owner cannot withdraw these freedoms. The following components are included under this license:

Attribution: Users must provide appropriate attribution, including a link to the license, and indicate whether or not they made any modifications. Users are free to do so reasonably, but not in a manner that indicates the licensee approves of their usage.

NonCommercial: Users may not use the material for commercial purposes.