DAMPAK METODE PEMBELAJARAN BERBASIS PROYEK (PjBL) TERHADAP PRESTASI BELAJAR DALAM MATA KULIAH INVENTORY CONTROL

Article Sidebar

PDF
Published: Dec 31, 2024
DOI: https://doi.org/10.24853/fbc.10.2.237-246
Keywords:
learning achievement inventory control project-based learning

Main Article Content

Niken Rarasati
Universitas Jambi
https://orcid.org/0009-0006-0057-3353
Gusmi Kholijah
Universitas Jambi
Annida Tasmara
Universitas Jambi

Abstract

One of learning method that can provide practical experience for students can be made in the form of a project. Project-based learning can be carried out in the Inventory Control course, this is because the inventory course has a course description for decision making in optimizing profits with inventory management. Project-based learning can also provide soft skills for students, including; leadership ability, responsibility for the given project, cooperation, good communication between students and the community and independence. Project-based learning research in the Inventory Control course is carried out in three stages, namely: preparation, implementation and evaluation. In the preparation stage, the research team discussed and prepared research outputs such as Course Learning Outcomes, Lecture Syllabus and Contract, Semester Learning Plan, Student Project Assignment Plan, and Learning Outcome Assessment Sheet. Based on the results of the analysis, it was found that 98.61% of learning outcomes were successfully achieved by implementing the project in the Inventory Control Course

Article Details

Issue
Vol. 10 No. 2 (2024): FIBONACCI: Jurnal Pendidikan Matematika dan Matematika
Section
Articles

Authors who publish with this journal agree to the following terms:

 

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

 

Author Biographies

Niken Rarasati, Universitas Jambi

Program Studi Matematika, Fakultas Sains dan Teknologi

Gusmi Kholijah, Universitas Jambi

Program Studi Matematika, Fakultas Sains dan Teknologi

References

Abelenda, A. M., Aiouache, F., & Mediavilla, D. M. (2023). Adapted business model canvas template and primary market research for project-based learning on management of slurry. Environmental Technology & Innovation, 30, 103106. https://doi.org/10.1016/j.eti.2023.103106

Agresti, A. (2007). An Introduction to Categorical Data Analysis Second Edition, Second edition (2nd ed.). John Wiley & Sons, Inc.

Agustin, N., Ibrahim, M., & Widodo, W. (2016). Pengembangan Bahan Pembelajaran IPA Berbasis Biotechnopreneurship untuk Melatih Life Skills Siswa SMP. Prisma Sains: Jurnal Pengkajian Ilmu dan Pembelajaran Matematika dan IPA IKIP Mataram. Prisma Sains: Jurnal Pengkajian Ilmu Dan Pembelajaran Matematika Dan IPA IKIP Mataram, 4(1), 1–12. http://ojs.ikipmataram.ac.id/index.php/prismasains/

Ceh-Varela, E., Canto-Bonilla, C., & Duni, D. (2023). Application of Project-Based Learning to a Software Engineering course in a hybrid class environtment. Information and Software Technology, 158, 170–189.

Colim, A., Carneiro, P., Carvalho, J. D., & Teixeira, S. (2022). Occupational Safety & Ergonomics training of Future Industrial Engineers: A Project-Based Learning Approach. Procedia Computer Science, 204, 505–512.

Darmanto, E., & Hartati, S. (2012). Klasifikasi Material sebagai Analisis Awal Pengendalian Inventory Berbasis Sistem Cerdas Fuzzy-LVQ. Prosiding Seminar Nasional Komputer Dan Elektro-SENAPUTRO 2012 Fakultas Teknik-Universitas Surakarta, 57–64.

Gomez-del Rio, T., & Rodriguez, J. (2022). Design and assessment of a project-based learning in a laboratory for integrating knowledge and improving engineering design skills. Education for Chemical Engineers, 40, 17–28. https://doi.org/10.1016/j.ece.2022.04.002

Han, S. Y., Capraro, R. M., & Capraro, M. M. (2014). How Science, Technology, Engineering and Mathematics (STEM) Project-Based Learning (PBL) Affects High, Middle And Low Achiever Differently: The Impact Of Student Factors On Achievent ... Differently: The Impact Of Student Factors. International Journal of Of Science and Mathematics Education.

Junaidi, A., & dkk. (2020). Panduan Penyusunan Kurikulum Pendidikan Tinggi di Era Industri 4.0 untuk Mendukung Merdeka Belajar-Kampus Merdeka: Vol. IV.

Kholijah, G., Rarasati, N., Sormin, C. (2023). Optimalisasi Project Based Learning Mata Kuliah Pemograman Komputer Pada Mahasiswa Matematika. Fibonacci : Jurnal Pendidikan Matematika dan Matematika, 9(2). https://dx.doi.org/10.24853/fbc.9.2.197-206

Lu, H. F. (2023). Statistical learning in sports education: A case study on improving quantitative analysis skills through project-based learning. Journal of Hospitality, Leisure, Sport and Tourism Education, 32. https://doi.org/10.1016/j.jhlste.2023.100417

Nurhasah, Sari, R. F., & Cipta, H. (2023). Pengendalian Persediaan Bahan Baku Brownies dengan Analisis Perbandingan Metode Min-Max, Economic Order Quantity dan Period Order Quantity. Lebesgue: Jurnal Ilmiah Pendidikan Matematika, Matematika Dan Statistika, 4(1), 151–160. https://doi.org/10.46306/lb.v4i1

Patmanthara, S. (2016). Implementasi Model Pembelajaran Berbasis Proyek untuk Meningkatkan Aktivitas dan Hasil Belajar Mahasiswa. TEKNO (Jurnal Teknologi Elektro Dan Kejuruan), 26(2), 100–107.

Ramsden, P. (2004). Learning to Teach in Higher Education, 2nd Edition (Vol. 2).

Rarasati, N., Rozi, S., & Multahadah, C. (2022). Penerapan Model Pembelajaran Berbasis Proyek Pada Mata Kuliah Metode Optimisasi di Program Studi Matematika Fakultas Sains Dan Teknologi Universitas Jambi. Absis : Jurnal Pendidikan Matematika dan Matematika, Vol 4. No. 2. https://doi.org/10.30606/absis.v4i2.1172

Salazar-Peña, R., Pedroza-Toscano, M. A., López-Cuenca, S., & Zárate-Navarro, M. A. (2023). Project-based learning for an online course of simulation engineering: From bioreactor to epidemiological modeling. Education for Chemical Engineers, 42, 68–79. https://doi.org/10.1016/j.ece.2022.12.002

Santos, C., Rybska, E., Klichowski, M., Jankowiak, B., Jaskulska, S., Domingues, N., Carvalho, D., Rocha, T., Paredes, H., Martins, P., & Rocha, J. (2023). Science education through project-based learning: a case study. Procedia Computer Science, 219, 1713–1720. https://doi.org/10.1016/j.procs.2023.01.465

Siboro, F. R., & Nasution, R. H. (2020). Analisis Pengendalian Persediaan Bahan Baku dengan Menggunakan Metode Economic Order Quantity (EOQ) dan Metode Min-Max. JITEKH, 8(1), 34–40.

Steffen, T., Fly, A., & Stobart, R. (2022). Project-Based Learning for Control of Hybrid Powertrains using a Simulation Model. IFAC-PapersOnLine, 55(17), 25–30. https://doi.org/10.1016/j.ifacol.2022.09.220