Analysis Characteristics Hybrid Coolant Nanoparticles As a Cooling Media for Genset Generator
DOI:
https://doi.org/10.24853/jurtek.16.2.259-266Keywords:
Hybrid coolant, Nanoparticles, Genset Generator.Abstract
Industry nanotechnology- based is a very significant new modern era, where throughout field develop and use it. In the world of technology as primary needs at the moment This for society, has Lots use results its products. Cooling system as balancers in the industrial world including generators require gensets research and development For cool diesel generator engine . Hybrid coolant has composition 30% material natural and 70% distilled water. The addition nanoparticles to in hybrid coolant of 1% (TiO2-SiO2-Al2O3 ). The test was carried out is temperature point education, pH value, density. Analysis results The characteristics of hybrid coolant are point boiling 99°C, pH value between 5.79-6.06, as well mark density of 1,012-1,024.Downloads
References
Ariningsih, Ening. "Prospek penerapan teknologi nano dalam pertanian dan pengolahan pangan di Indonesia." Forum Penelitian Agro Ekonomi. Vol. 34. No. 1. 2016.
Siregar, Ameilia Zuliyanti. "Kelapa Sawit: Minyak nabati berprospek tinggi." (2006).
Ageta, Asteria Noventi, and Ratna Purwaningsih. "Pemetaan Supply Chain Pengolahan Tandan Buah Segar (Tbs) Menjadi Crude Palm Oil (Cpo) Dan Inti Kernel Di PKS Sawit Seberang." Industrial Engineering Online Journal 12.4 (2023).
Irawan, Bambang, and Nining Indroyono Soesilo. "Dampak kebijakan hilirisasi industri kelapa sawit terhadap permintaan CPO pada industri hilir." Jurnal Ekonomi & Kebijakan Publik 12.1 (2021): 29-43.
Sholihah, Sovia Masfuri Walidatus. Sintesis dan Karakterisasi Bioaditif Bahan Bakar Solar sebagai Peningkat Lubrisitas dari Minyak Sawit. Diss. Institut Teknologi Sepuluh Nopember, 2022.
Saptaji, Kushendarsyah, et al. "Studi Pengembangan Nanofluida Hijau Berasal Dari Bahan Lokal Alam Untuk Aplikasi Di Bidang Teknik." Jurnal Teknologi 15.2 (2023): 345-358.
Rahardja, Istianto Budhi, et al. "Inovasi dan Kemajuan Teknologi Bidang Kelapa Sawit Sebagai Kearifan Natural Materials Indonesia." Prosiding Seminar Nasional Penelitian LPPM UMJ. Vol. 1. No. 1. 2023.
Ramadhan, Anwar Ilmar, et al. "Aplikasi Nanofluida Hijau untuk di Aplikasikan pada Sistem Pendingin Motor." Prosiding Seminar Nasional Penelitian LPPM UMJ. Vol. 1. No. 1. 2023.
Ma, Kun-Quan, and Jing Liu. "Nano liquid-metal fluid as ultimate coolant." Physics Letters A 361.3 (2007): 252-256.
Pattireuw, Kevin Jones, Fentje Abdul Rauf, and Romels Cresano Apelles Lumintang. "Analisis laju korosi pada baja karbon dengan Menggunakan air laut dan H2SO4." Jurnal Poros Teknik Mesin UNSRAT 2.1 (2013).
Fatmawati, Anni, et al. "Analisa Penggunaan Coolant Terhadap Sistem Pendingin Pada Kendaraan Roda Empat Di Politeknik Negeri Samarinda." MEKANIK 16.2 (2023): 8-14.
Yadav, R. J., and R. S. Verma. "Effective utilization of waste heat from diesel genset to run air conditioning plant." proceedings of national conference on advances in energy research (AER-2006), IIT Bombay. 2006.
Sukanto, Heru. "Pengaruh Suhu Sintering Terhadap Densitas dan Kekuatan Komposit Plastik-Karet." Jurnal Ilmiah Teknik Mesin 3.1 (2009): 57-61.
Bhirawa, Gama Kusuma. Pengaruh Temperatur Dan Waktu Proses Perengkahan Katalitik Crude Palm Oil Terhadap Nilai Oktan Dan Titik Didih Biogasoline Menggunakan Katalis γ-Al2O3. Diss. Institut Teknologi Sepuluh Nopember, 2023.
Harianti, Hasrianti, and Nurasia Nurasia. "Analisis warna, suhu, pH dan salinitas air sumur bor di Kota Palopo." Prosiding 2.1 (2016).
Zulius, Antoni. "Rancang Bangun Monitoring pH air menggunakan soil moisture sensor di SMK N 1 Tebing Tinggi Kabupaten Empat Lawang." Jusikom: Jurnal Sistem Komputer Musirawas 2.1 (2017): 37-43.
Buchori, Muhammad Lukman. Identifikasi tingkat, jenis, dan faktor-faktor penyebab kesulitan siswa MA Negeri Wlingi dalam memahami materi indikator dan pH larutan asam-basa. Diss. Universitas Negeri Malang, 2013.
Haidir, Andi, Anditania Sari Dwi Putri Tania Dwi, and Ely Nurlaily Ely Nurlaily. "Analisis Laju Korosi Paduan Aluminium Feronikel Pada pH Basa Dengan Potensiostat." PIN Pengelolaan Instalasi Nuklir 10.18 (2017).
Kasli, Elisa, and Aminullah Aminullah. "Pengaruh massa jenis benda terhadap tekanan hidrostatis." Jurnal Pendidikan Geosfer 1.1 (2016).
Ramadhan, A.I., Umar, E., Azmi, W.H. and Sari, A.M., 2024. Heat transfer performance of Al2O3-TiO2-SiO2 ternary nanofluids in plain tube with wire coil inserts. Mechanical Engineering for Society and Industry, 4(1), pp.50-67.
Ramadhan, A.I., Sari, A.M., Saptaji, K., Rahardja, I.B., Umar, E., Perdana, S.Y. and Azmi, W.H., 2023. Characterization and Stability of ZrO2-SiO2 Nanofluids from Local Minerals Indonesia as Green Nanofluids to Application Radiator Cooling System. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 111(2), pp.126-140.
Ramadhan, A.I., Diniardi, E., Basri, H., Almanda, D. and Azmi, W.H., 2023, May. Experimental investigation of thermal conductivity of Al2O3-TiO2-SiO2 nanofluids in EG/water mixture for automotive radiator cooling system. In AIP Conference Proceedings (Vol. 2706, No. 1). AIP Publishing.
Ramadhan, A.I., Azmi, W.H., Sharma, K.V. and Umar, E., 2022. Experimental Investigation of Thermal Properties of Ternary Nanofluids in Water-Ethylene Glycol (60: 40) Mixture. Journal of Applied Sciences and Advanced Technology, 5(1), pp.13-26.
Diniardi, E., Basri, H., Ramadhan, A.I., Almanda, D. and Sari, A.M., 2022. Studi Eksperimental Perpindahan Panas Dan Penurunan Tekanan Dari Hibrida Nanofluida Di Pendingin Radiator Mobil. Jurnal Teknologi, 14(2), pp.221-232.
Hamisa, A.H., Azmi, W.H., Yusof, T.M., Ismail, M.F. and Ramadhan, A.I., 2022. Rheological Properties of TiO2/POE Nanolubricant for Automotive Air-Conditioning System. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 90(1), pp.10-22.
Downloads
Published
How to Cite
Issue
Section
License
COPYRIGHT POLICY
The author(s) of an article published in the Jurnal Teknologi retains ownership of the intellectual property rights in work (s).
PUBLISHING RIGHTS
The author(s) of an article published in the Jurnal Teknologi have unrestricted publication rights. The authors give the Jurnal Teknologi the right to publish the article and designate the Faculty of Engineering Universitas Muhammadiyah Jakarta Publishing as the original publisher of the article.
LICENSING POLICY
Journal of Mechanical Engineering and Sciences is an open-access journal that follows the Creative Commons Non-Commercial 4.0 International License (CC BY-NC 4.0), which states that:
Under this license, the reusers must give appropriate credit, provide a link to the license, and indicate if changes were made. Users may do so in any reasonable manner, but not in any way that suggests the licensor endorses users or their use.
Please take the time to read the whole license agreement (https://creativecommons.org/licenses/by-nc/4.0/). As long as reusers follow the license conditions, the owner cannot withdraw these freedoms. The following components are included under this license:
Attribution: Users must provide appropriate attribution, including a link to the license, and indicate whether or not they made any modifications. Users are free to do so reasonably, but not in a manner that indicates the licensee approves of their usage.
NonCommercial: Users may not use the material for commercial purposes.
