ANALISIS PENGARUH RADIUS DIES TERHADAP SPRINGBACK LOGAM LEMBARAN STAINLESS-STEEL PADA PROSES BENDING HIDROLIK V-DIE
Main Article Content
Abstract
Downloads
Article Details
COPYRIGHT POLICY
The author(s) of an article published in the Jurnal Teknologi retains ownership of the intellectual property rights in work (s).
PUBLISHING RIGHTS
The author(s) of an article published in the Jurnal Teknologi have unrestricted publication rights. The authors give the Jurnal Teknologi the right to publish the article and designate the Faculty of Engineering Universitas Muhammadiyah Jakarta Publishing as the original publisher of the article.
LICENSING POLICY
Journal of Mechanical Engineering and Sciences is an open-access journal that follows the Creative Commons Non-Commercial 4.0 International License (CC BY-NC 4.0), which states that:
Under this license, the reusers must give appropriate credit, provide a link to the license, and indicate if changes were made. Users may do so in any reasonable manner, but not in any way that suggests the licensor endorses users or their use.
Please take the time to read the whole license agreement (https://creativecommons.org/licenses/by-nc/4.0/). As long as reusers follow the license conditions, the owner cannot withdraw these freedoms. The following components are included under this license:
Attribution: Users must provide appropriate attribution, including a link to the license, and indicate whether or not they made any modifications. Users are free to do so reasonably, but not in a manner that indicates the licensee approves of their usage.
NonCommercial: Users may not use the material for commercial purposes.
References
Ahmed, G.M. Sayeed, Hakeemuddin Ahmed, Mohd Viquar Mohiuddin, and S. Md Safi Sajid. 2014. “Experimental Evaluation of Springback in Mild Steel and Its Validation Using LS-DYNA.” Procedia Materials Science 6(Icmpc): 1376–85. http://dx.doi.org/10.1016/j.mspro.2014.07.117.
Altan, Taylan. 1998. Metal Forming Handbook Metal Forming Handbook. ed. Taylan Altan. Springer Verlag Berlin.
American Society for Testing and Materials. 2004. I ASTM International ASTM A240: Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate , Sheet , and Strip for Pressure Vessels and for General Applications.
Basri, H., Ramadhan, A. I., & Diniardi, E. (2019). Analysis Structure and Function Cooling System on Unit D155A-6. Journal of Applied Sciences and Advanced Technology, 1(2), 49-52.
Leu, Daw Kwei, and Zhi Wei Zhuang. 2016. “Springback Prediction of the Vee Bending Process for High-Strength Steel Sheets.” Journal of Mechanical Science and Technology 30(3): 1077–84.
Lin, Zone Ching, and D. A.Yuan Chang. 1996. “Selection of Sheet Metal Bending Machines by the PRISM-Inductive Learning Method.” Journal of Intelligent Manufacturing 7(4): 341–49.
Osakada, K., K. Mori, T. Altan, and P. Groche. 2011. “Mechanical Servo Press Technology for Metal Forming.” CIRP Annals - Manufacturing Technology 60(2): 651–72.
Osman, M, M Shazly, A El Mokadddem, and A S Wifi. 2010. “Springback Prediction in V-Die Bending : Modelling and Experimentation.” Journal of Achievement in Materials and Manufacturing Engineering 38(2): 179–86.
Palaniswamy, Hariharasudhan, Gracious Ngaile, and Taylan Altan. 2004. “Optimization of Blank Dimensions to Reduce Springback in the Flexforming Process.” Journal of Materials Processing Technology 146(1): 28–34.
Setiyo, M., Saifudin, B. C. P., Waluyo, B., & Ramadhan, A. I. (2017). Temperature Distribution of R-134a Through Aluminum and PTFE Expansion Valve on Automotive Air Conditioning Applications. ARPN Journal of Engineering and Applied Sciences, 12(4), 1046-1051.
Sun, Zhiying, and Lihui Lang. 2017. “Effect of Stress Distribution on Springback in Hydroforming Process.” International Journal of Advanced Manufacturing Technology 93(5–8): 2773–82.
Thakare, Prafull S., Sandip M. Salodkar, and C. C. Handa. 2019. “Experimental Investigation of Three-Roller Bending Operation for Multi-Pass Cylindrical Forming of Plates.” Materials Today: Proceedings 18: 2779–86. https://doi.org/10.1016/j.matpr.2019.07.143.
Troive, Lars et al. 2018. “Springback Compensation for a Vehicle’s Steel Body Panel.” International Journal of Computer Integrated Manufacturing 31(2): 152–63. https://doi.org/10.1080/0951192X.2017.1379096.
Yakub, A., Karmiadji, D. W., & Ramadhan, A. I. (2016). Optimasi Desain Rangka Sepeda Berbahan Baku Komposit Berbasis Metode Anova. Jurnal Teknologi, 8(1), 17-22.
Yang, He et al. 2012. “Advances and Trends on Tube Bending Forming Technologies.” Chinese Journal of Aeronautics 25(1): 1–12. http://dx.doi.org/10.1016/S1000-9361(11)60356-7.
Yu, Q. M., X. J. Yang, and H. L. Zhou. 2018. “An Experimental Study on the Relationship between Torque and Preload of Threaded Connections.” Advances in Mechanical Engineering 10(8): 1–10.