ANALISIS MANAJEMEN RISIKO KESELAMATAN DAN KESEHATAN KERJA DENGAN MENGGUNAKAN METODE HIRARC PADA PEKERJAAN SEKSI CASTING

Rini Alfatiyah

Abstract


PT. XYZ Serpong unit is a manufacturing company involved in the installation of a pipe that prioritizes Safety and Health (K3) in every work activity. To support the implementation of the Occupational Safety and Security Management System (SMK3), the investigation was conducted using Hazard Risk Assessment, Risk Assessment and Risk Control (HIRARC) in the Casting section. Possible dangers in 5 stages of work breaker at PT XYZ. is the process star rating, LPDC (Low Pressure Die Casting), shotblast, cutting and range. After conducting an investigation with Hazard Risk Assessment, Risk Assessment and Risk Assessment (HIRARC) in the category of major hazard risk stages, 60% were core processes, LPDC and cutting. Although the risk hazard category that may be accepted as much as 40% is the process of shooting and range.


Keywords


Risk Management; Safety and Health; Methods HIRARC

Full Text:

PDF

References


Afandi, M., Anggraeni, S. K., & Mariawati, A. S., 2015, Manajemen Risiko K3 Menggunakan Pendekatan HIRARC (Hazard Identification, Risk Assessment and Risk Control) Guna Mengidentifikasi Potensi Hazard. Jurnal Teknik Industri Untirta 3(2).

Alfiah, Suzi. (2012). Penilaian Risiko Keselamatan Dan Kesehatan Kerja Pada Kegiatan Operasi Dan Produksi PT Pertamina Geothermal Energy Area Lahedong Tahun 2012. Depok: Fakultas Kesehatan Masyarakat Universitas Indonesia

Anizar. (2009). Teknik Keselamatan dan Kesehatan Kerja di Industri. Yogyakarta: Graha Ilmu.

Australian Standard/New Zaeland, 1999, Handbook Risk Managemenet Guidlines companion to AS/NZS 4360 : 1999, Sydney and Wellington, Author.

Australian Standard/New Zaeland, 2004, Handbook Risk Managemenet Guidlines companion to AS/NZS 4360 : 2004, Sydney and Wellington, Author.

Budiono, Sugeng, Jusuf dan Adriana Pusparini. (2003). Hiperkes & KK. Semarang: Badan Penerbit Universitas Diponegoro Semarang

Cross, J. (1998). Risk Management. Dalam Study Notes SESC921. Departement of Safety Science University of New South Wales.

Gunawan, A. A., 2015, Perbaikan Keselamatan dan Kesehatan Kerja dengan Metode HIRARC di PT. Sumber Rubberindo Jaya, Jurnal Titra, 3(2), 421-426.

Halim, L. N., & Panjaitan, T. W. S. (2016). Perancangan Dokumen Hazard Identification Risk Assessment Risk Control (HIRARC) Pada Perusahaan Furniture: Studi Kasus. Jurnal Titra, 4(2), 279-284.

Indonesia, Peraturan Pemerintah 2012, Peraturan Pemerintah Republik Indonesia Nomor 50 tahun 2012 tentang Penerapan Sistem Manajemen Keselamatan dan Kesehatan Kerja, Jakarta.

Irawan, S., Panjaitan, T. W., & Bendatu, L. Y., 2015, Penyusunan Hazard Identification Risk Assessment and Risk Control (HIRARC) Di PT. X. Jurnal Titra, 3(1), 15-18.

Ramli, Soehatman, 2010, Sistem Manajemen Keselamatan dan Kesehatan Kerja OHSAS 18001, Jakarta, PT. Dian Rakyat.

Sahab, Syukri 1997, Teknik Manajemen Keselamatan dan Kesehatan Kerja, Jakarta, PT. Bina Sumber Daya Manusia.

Suma’mur, Dr. P.k, M.Sc. (2009). Higiene Perusahaan dan kesehatan Kerja (Hiperkes). Jakarta: Sagung Seto.

Wijaya, A., Panjaitan, T. W., & Palit, H. C., 2015, Evaluasi Kesehatan dan Keselamatan Kerja dengan Metode HIRARC pada PT. Charoen Pokphand Indonesia. Jurnal Titra, 3(1), 29-34.

Wiraswasti, Ira. (2010). Gambaran Tingkat Risiko Kecelakaan Kerja Di Section Welding PT Indomobil Suzuki International Plant Tambun II. Jakarta: FKK UMJ


Refbacks

  • There are currently no refbacks.


Copyright (c) 2017 SINTEK JURNAL: Jurnal Ilmiah Teknik Mesin

Powered by Puskom-UMJ