_2.png)
1.png)
2.png)
Process of Making Gas Stove Spuyer with TU-2A CNC Machine
Abstract
The TU-2A CNC machine is a turning machine tool that is controlled by a computer system through data (program input) in the form of letters and numbers. This machine is capable of producing a work piece with a complex shape and high accuracy, as well as the effectiveness of minimum production time. Gas stove nozzle is a form of work piece which in the manufacturing process is required to have a high level of effectiveness with high accuracy. The supporting factors in the manufacturing process are based on the selection of program functions and machining parameters (cutting speed, feeding, feeding speed and proper rotation of the main axis).In the process of making gas stove nozzles using a CNC TU – 2A machine, the parameter values used are cutting speed (Vs) 20 m/min, feeding 0.75 mm/put, feeding speed (s') 281 mm /min and the main axis rotation (n) 375 rpm.So from the parameters used, it is known that the total machining time per component (tm) = 5.4 minutes, the total production cost per component (Cprod) = Rp. 8,572, - and the total production time per component (t prod) = 7.6 minutes. The greater the value of the Dept of cut, feed and feeding speed, the production time and production costs that occur will decrease until they reach t = 2.6% and C = 2.3%.
Keywords
Full Text:
PDFReferences
Dionisius, F., Firdaus, S., Maulana, M. E., Carudi, C., Badruzzaman, B., & Suliono, S. (2020). Characteristic of flame length on spuyer diameter in conventional LPG stove. In IOP Conference Series: Materials Science and Engineering (Vol. 732, No. 1, p. 012088). IOP Publishing.
Pratama, A., Basyirun, B., Atmojo, Y. W., Ramadhan, G. W., & Hidayat, A. R. (2020). Rancang Bangun Kompor (Burner) Berbahan Bakar Oli Bekas. Mekanika: Majalah Ilmiah Mekanika, 19(2), 95-103.
Mahmud, K.H., Yudistirani, S.A., Diniardi, E. and Ramadhan, A.I., 2020. Hardness Analysis of Bearing on Heat Treatment Process. Journal of Applied Sciences and Advanced Technology, 2(3), pp.59-64.
Bruni, S., Goodall, R., Mei, T.X. and Tsunashima, H., 2007. Control and monitoring for railway vehicle dynamics. Vehicle System Dynamics, 45(7-8), pp.743-779.
Almanda, D. and Ramadhan, A.I., 2020. Analysis of the Potential for Savings in Electrical Energy Consumption in Lifts: Case Study in Indonesia. Journal of Applied Sciences and Advanced Technology, 3(1), pp.29-34.
Timoshenko. 1991 “Technoligi of Machine Tools”, 4 th edition. McGraw Hill Book Company, New York.
Yudistirani, S.A., Mahmud, K.H. and Diniardi, E., 2021. Stamping Disability Analysis on Material SPC 270 E. Journal of Applied Sciences and Advanced Technology, 3(3), pp.75-80.
Rahardja, I. B., Daraquthni, Z., & Ramadhan, A. I. (2019). Potential of Palm Oil Solid Waste as Steam Power Fuel (Case Study at XYZ Palm Oil Mill). Journal of Applied Sciences and Advanced Technology, 2(2), 33-38.
Yulianto, D., Nugroho, W. A., & Argo, B. D. (2015). Uji Kinerja Kompor Spiral Tipe Vertikal Dengan Bahan Bakar Minyak Jelantah. Jurnal Keteknikan Pertanian Tropis dan Biosistem, 4(1), 27-32.
Budiprasojo, A., Rofii, A., & Hananto, Y. (2019, December). Alih Teknologi Tepat Guna Kompor Pembakaran Premix Dual Tungku Multi Nosel Untuk Meningkatkan Produksi Industri Rumah Tangga Kue Balok Oma Di Kabupaten Jember. In Prosiding Seminar Pengabdian (Vol. 1, No. 1, pp. 57-61). Politeknik Negeri Jember.
Budiprasojo, A., Hananto, Y., & Rofi’i, A. (2021). Penerapan Teknologi Kompor Pembakaran Premix Dual Tungku Multi Nosel Dalam Upaya Peningkatan Produksi Industri Kue Balok Oma Jember. J-Dinamika: Jurnal Pengabdian Masyarakat, 6(1), 206-211.
DOI: https://doi.org/10.24853/jasat.4.3.87-92
Refbacks
- There are currently no refbacks.
Journal of Applied Sciences and Advanced Technology (JASAT) Indexing by:
Copyright of Journal of Applied Sciences and Advanced Technology (JASAT)
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License