ANALISA BIAYA DAN PERANCANGAN ALAT PEMASANG BUSHING PADA ATTACHMENT PC 400 DENGAN METODE VDI 2221
DOI:
https://doi.org/10.24853/jisi.2.2.47-54Abstract
Pembuatan sebuah alat harus mencakup minimal 3 (tiga) hal yaitu realistis, estetika dan ergonomi. Pembuatan tool untuk memperkecil lead time suatu pekerjaan, mengurangi kerja ulang (Re-Do) dan mengurangi accident dari pekerjaan tersebut sangatlah diperlukan sebagai salah satu solusi dalam melakukan efisiensi biaya dari suatu kegiatan produksi. Metode perancangan VDI 2221 digunakan untuk menyelesaikan permasalahan serta mengoptimalkan penggunaan material dan teknologi. Beberapa tahapan perancangannya adalah klasifikasi tugas, perancangan konsep produk, perancangan wujud produk, dan perancangan terinci. Alat pemasangan bushing dapat dibuat dengan material-material standar serta menggunakan peralatan-peralatan yang sudah tersedia di workshop. Proses perakitan, pemasangan, serta pengoperasian relative mudah. Konsep bentuk variasi terpilih adalah variasi I dengan tekanan maksimum 441 kg/cm² dengan biaya produksi Rp 11.242.100,-References
Alfonsus Sirait, Herman Wibowo. (1997). Akuntansi Biaya dan Harga Pokok Perencanaan dan Pengendalian, Saduran dari Cost Accounting Planning and Control, Adolf Matz dan Milton F.
Karl T. , Ulrich dan Steven D. Eppinger, “Perancangan dan Pengembangan Produk”, 2001.
KMMS, “Management Maintenance”, 2015. Third Edition.
KOMATSU, “Shop Manual PC 400”, 2014. Thirtieth Edition.
Mulyadi. 2000. Akuntansi Biaya Edisi 5. Yogyakarta: Aditya Media.
Prof. Ir Tata Surdia MS. Met E. Dan Prof. DR Shinroku Saito, “Pengetahuan Bahan Teknik”, PT. Pradnya Paramitha, Jakarta, 2005.
PT. Kalimantan Prima Persada, “Data Lead Time Install Bushing Attachment PC 400”, 2015. Plant Departement
Sularso, “Dasar Perencanaan dan Pemilihan Elemen Mesin”, PT. Pradnya Paramitha, Jakarta, 1997.
Supriyono, R.A. 1999. Manajemen Biaya Suatu Reformasi Pengelolaan Bisnis. BPFE, Yogyakarta
Usry, Lawrence H. Hammer, Edisi 9. Jakarta: Erlangga.
Downloads
Published
Issue
Section
License
COPYRIGHT POLICY
The author(s) of an article published in the JISI UMJ retains ownership of the intellectual property rights in work (s).
PUBLISHING RIGHTS
The author(s) of an article published in the JISI UMJ have unrestricted publication rights. The authors give the JISI UMJ the right to publish the article and designate the Industrial of Engineering Universitas Muhammadiyah Jakarta Publishing as the original publisher of the article.
LICENSING POLICY
Journal of Industrial Engineering and Sciences is an open-access journal that follows the Creative Commons Non-Commercial 4.0 International License (CC BY-NC 4.0), which states that:
Under this license, the reusers must give appropriate credit, provide a link to the license, and indicate if changes were made. Users may do so in any reasonable manner, but not in any way that suggests the licensor endorses users or their use.
Please take the time to read the whole license agreement (https://creativecommons.org/licenses/by-nc/4.0/). As long as reusers follow the license conditions, the owner cannot withdraw these freedoms. The following components are included under this license:
Attribution: Users must provide appropriate attribution, including a link to the license, and indicate whether or not they made any modifications. Users are free to do so reasonably, but not in a manner that indicates the licensee approves of their usage.
NonCommercial: Users may not use the material for commercial purposes.
