Penerapan Metode AHP dalam Pemilihan Material Pembuatan Alat Bantu Kerja Proses Pengukuran

Penulis

  • N Nelfiyanti Program Studi Teknik Industri, Fakultas Teknik, Universitas Muhammadiyah Jakarta, Jl. Cempaka Putih tengah 27, 10510 Indonesia
  • Sri Anastasia Yudistirani Program Studi Teknik Kimia, Fakultas Teknik, Universitas Muhammadiyah Jakarta, Jl. Cempaka Putih tengah 27, 10510 Indonesia
  • Yusrizal Bakar Program Studi Teknik Industri, Fakultas Teknologi Industri, Universitas Bung Hatta, Kampus 3 Jl. Gajah Mada No.19 Padang
  • Andry Setiawan Program Studi Teknik Industri, Fakultas Teknik, Universitas Muhammadiyah Jakarta, Jl. Cempaka Putih tengah 27, 10510 Indonesia
  • Rayhan Pangestu Program Studi Teknik Industri, Fakultas Teknik, Universitas Muhammadiyah Jakarta, Jl. Cempaka Putih tengah 27, 10510 Indonesia

DOI:

https://doi.org/10.24853/jisi.11.1.77-86

Abstrak

Industri UMKM memberikan kontribusi terhadap pertumbuhan ekonomi di Indonesia. Proses produksi pada industri UMKM ini merupakan hal yang penting dikarenakan pada proses ini terjadi perubahan dari material bahan baku menjadi produk jadi. Proses produksi pada bagian pengukuran di industri UMKM ini dilakukan bukan di meja melainkan dilakukan dilantai, hal ini sangat berbahaya jika dilakukan secara terus – menerus. Diperlukan alat bantu untuk membatu proses tersebut. Penelitian ini bertujuan untuk memprioritaskan alternatif material yang akan digunakan dalam membuat alat bantu kerja. Penelitian ini menggunakan metode Analytical Hierarchy Process (AHP) untuk proses pengambilan keputusan. Berdasarkan perhitungan yang sudah dilakukan didapatkan prioritas pertama pemilihan material alat bantu pembuatan meja ini yaitu dengan menggunakan besi hollow dengan nilai bobot 0.449. alternatif material ke dua yaitu kayu degan nilai bobot sebesar 0.284 dan prioritas terakhir adalah aluminium dengan nilai bobot sebesar 0.267. Dapat disimpulkan bahwa material hollow merupakan material terpilih yang dapat digunakan dalam pembuatan alat bantu kerja.

Biografi Penulis

N Nelfiyanti, Program Studi Teknik Industri, Fakultas Teknik, Universitas Muhammadiyah Jakarta, Jl. Cempaka Putih tengah 27, 10510 Indonesia

Department of Industrial Engineering, Faculty of Engineering Universitas Muhammadiyah Jakarta(Profile in Scopus)(Profile in Google Scholar)

Referensi

Ariyanti, S., Ismail, A., & Gunaryono, A. (2020). Performance Assessment of Foam Material Suppliers using the Analytic Hierarchy Process (AHP) Method. Jurnal PASTI, 14(1), 15–25. https://doi.org/10.22441/pasti.2020.v14i1.002

Astuti, R. D., Kusumo, F., Pudjiantoro, P., & Suhardi, B. (2022). Design of Working Table for Fret Wiring Operators With Nida Method in Guitar Industry Mancasan Sukoharjo. SPEKTRUM INDUSTRI, 2630, 29–38.

Bhanudas Bachchhav, Abhishek Kumbhare, Chinmay Hoonur, Sharayu Kulkarni, & Jaydeo Kalankar. (2020). Grading of Spot Welding Electrode Material Properties Using AHP. Journal of Modern Mechanical Engineering and Technology, 7, 59–65. https://doi.org/10.31875/2409-9848.2020.07.8

BPS. (2023). Ekonomi Indonesia Tahun 2022 Tumbuh 5,31 Persen. BPS. https://www.bps.go.id/pressrelease/2023/02/06/1997/ekonomi-indonesia-tahun-2022-tumbuh-5-31-persen.html

Darianto, D., Siregar, A., Umroh, B., & Kurniadi, D. (2019). Simulasi Kekuatan Mekanis Material Komposit Tempurung Kelapa Menggunakan Metode Elemen Hingga. Journal of Mechanical Engineering Manufactures Materials and Energy, 3(1), 39. https://doi.org/10.31289/jmemme.v3i1.2443

Dos Santos, P. H., Neves, S. M., Sant’Anna, D. O., Oliveira, C. H. de, & Carvalho, H. D. (2019). The analytic hierarchy process supporting decision making for sustainable development: An overview of applications. Journal of Cleaner Production, 212, 119–138. https://doi.org/10.1016/j.jclepro.2018.11.270

Herbirowo, S., & Adjiantoro, B. (2019). Characteristics Of Mechanical Properties And Micro Structure Of Low Carbon Laterite Steel Alloy 1.7 Ni With Cold Rollng Process. Jurnal Teknologi Bahan Dan Barang Teknik, 9(1), 33. https://doi.org/10.37209/jtbbt.v9i1.88

Ibraheem, A. T., & Atia, N. S. (2016). Applying Decision Making With Analytic Hierarchy Process(AHP) for Maintenance Strategy Selection of Flexble Pavement. 16(5).

Liu, Q., Yang, H., & Xin, Y. (2019). Applying value stream mapping in an unbalanced production line: A case study of a Chinese food processing enterprise. Quality Engineering, 32(1), 111–123. https://doi.org/10.1080/08982112.2019.1637526

Mastura, M. T., Nadlene, R., Jumaidin, R., Abdul Kudus, S. I., Mansor, M. R., & Firdaus, H. M. S. (2022). Concurrent Material Selection of Natural Fibre Filament for Fused Deposition Modeling Using Integration of Analytic Hierarchy Process/Analytic Network Process. Journal of Renewable Materials, 10(5), 1221–1238. https://doi.org/10.32604/jrm.2022.018082

Maulana, H. (2018). Development of Semi-Automatic Screen Printing Table Products Using the Qfd Method. Tecnoscienza, 2(2).

Nelfiyanti, Mohamed, N., Rashid, M. F. F. A., & Ramadhan, A. I. (2022). Parameters of effects in decision making of automotive assembly line using the Analytical Hierarchy Process method. CIRP Journal of Manufacturing Science and Technology, 37, 370–377. https://doi.org/10.1016/j.cirpj.2022.02.018

Patnaik, P. K., Swain, P. T. R., Mishra, S. K., Purohit, A., & Biswas, S. (2020). Composite material selection for structural applications based on AHP-MOORA approach. Materials Today: Proceedings, 33(xxxx), 5659–5663. https://doi.org/10.1016/j.matpr.2020.04.063

Regna Tri Jayanti. (2021). Studi Pengujian Sifat Mekanik Material Baja ST-37. Majalah Teknik Industri, 29(2), 66–73.

Singh, A. K., Avikal, S., Nithin Kumar, K. C., Kumar, M., & Thakura, P. (2019). A fuzzy-AHP and M - TOPSIS based approach for selection of composite materials used in structural applications. Materials Today: Proceedings, 26(xxxx), 3119–3123. https://doi.org/10.1016/j.matpr.2020.02.644

Smarandache, F. (2010). α -Discounting Method for Multi-Criteria Decision Making ( α -D MCDM ). 13th International Conference on Information Fusion, 29–42. https://doi.org/10.13140/2.1.4832.7364

Taherdoost, H. (2017). Decision Making Using the Analytic Hierarchy Process (AHP); A Step by Step Approach. Journal of Economics and Management Systems, 2(International), 244–246. http://www.iaras.org/iaras/journals/ijems

Vural, D., & Kose, E. (2020). Selection of alternative filling material in the bed production with AHP and ELECTRE methods. Journal of Applied Research on Industrial Engineering, 7(2), 163–176. https://doi.org/10.22105/jarie.2020.226156.1147

Zulfikar, A. J., Umroh, B., & Siahaan, M. Y. R. (2019). Investigation of Mechanical Behavior of Polymeric Foam Materials Reinforced By Oil Palm Empty Fruit Bunches (Opefb) Fibers Due To Static and Dynamic Loads. Journal of Mechanical Engineering Manufactures Materials and Energy, 3(1), 10. https://doi.org/10.31289/jmemme.v3i1.2416

##submission.downloads##

Diterbitkan

2024-06-13

Terbitan

Vol 11 No 1 (2024): JISI UMJ

Bagian

Articles

Lisensi

COPYRIGHT POLICY

The author(s) of an article published in the JISI UMJ retains ownership of the intellectual property rights in work (s).

PUBLISHING RIGHTS

The author(s) of an article published in the JISI UMJ have unrestricted publication rights. The authors give the JISI UMJ the right to publish the article and designate the Industrial of Engineering Universitas Muhammadiyah Jakarta Publishing as the original publisher of the article.

LICENSING POLICY
Journal of Industrial Engineering and Sciences is an open-access journal that follows the Creative Commons Non-Commercial 4.0 International License (CC BY-NC 4.0), which states that: 


Under this license, the reusers must give appropriate credit, provide a link to the license, and indicate if changes were made. Users may do so in any reasonable manner, but not in any way that suggests the licensor endorses users or their use.
Please take the time to read the whole license agreement (https://creativecommons.org/licenses/by-nc/4.0/). As long as reusers follow the license conditions, the owner cannot withdraw these freedoms. The following components are included under this license:

Attribution: Users must provide appropriate attribution, including a link to the license, and indicate whether or not they made any modifications. Users are free to do so reasonably, but not in a manner that indicates the licensee approves of their usage.

NonCommercial: Users may not use the material for commercial purposes.