USULAN KEBIJAKAN PERSEDIAAN PRODUK KATEGORI SUPLEMEN DAN KEBUTUHAN HARIAN DI BM PT XYZ UNTUK MENGURANGI TOTAL BIAYA PERSEDIAAN MENGGUNAKAN METODE PERIODIC REVIEW (R,s,S)
DOI:
https://doi.org/10.24853/jisi.4.2.107-118Kata Kunci:
inventori, overstock, ADI-CV, monte carlo, periodic review (R, s, S).Abstrak
BM PT. XYZ merupakan pemasok tetap 27 apotek XYZ di kota Bandung. Produk yang dikelola terbagi atas kategori Obat Keras, Obat Bebas, Obat Bebas Terbatas, Suplemen, Kebutuhan Harian, dan Alat Kesehatan. Pada kondisi aktual, BM PT XYZ memiliki kebijakan persediaan dengan menerapkan interval pemesanan yang tetap. Namun titik pemesanan ulang dan tingkat persediaan maksimal belum memiliki standar yang baku. Akibatnya proses pengisian ulang persediaan menjadi tidak efisien dan mengakibatkan terjadinya overstock pada produk kategori suplemen dan kebutuhan harian yang menimbulkan ongkos total persediaan yang tinggi. Penelitian ini dilakukan untuk memberikan usulan kebijakan persediaan terhadap produk kategori suplemen dan kebutuhan harian. Penelitian dimulai dengan melakukan uji distribusi pada data permintaan. Sebanyak 78 % produk berdistribusi normal dan 22 % berdistribusi poisson. Kemudian akan dilakukan analisis ADI-CV untuk melihat pola permintaan dan didapat sebanyak 72% pola lumpy, 24% pola erratic, dan 4% pola slow moving. Hasil distribusi dan pola permintaan yang dimiliki menjadi bahan pertimbangan dilakukannya peramalan permintaan. Untuk melakukan peramalan permintaan menggunakan simulasi monte carlo yang hasil perhitungannya akan dijadikan masukkan untuk melakukan perhitungan metode Periodic Review (R,s,S). Hasil perhitungan menunjukkan kondisi usulan mampu menurunkan ongkos total biaya persediaan sebesar 46% lebih rendah dibandingkan biaya aktual dengan nilai penghematan sebesar Rp42,828,689.47.Referensi
A.A. Ghobbar, C. F. (2002). Sources of Intermittent Demand for Aircraft Spare Parts Within Airline Operations. Journal of Air Transport Management, 221-231.
Adhi Putra Mahardika, M. N. (2015). Pengendalian Persediaan untuk Mengurangi Biaya Total Persediaan dengan Pendekatan Metode Periodic Review (R,s,S) Power Approximation pada Suku Cadang Consumable (Studi Kasus : Job Pertamina Talisman Jambi Merang). Jurnal rekayasa Sistem Industri, Vol.4, No.1.
Arismawati, P., Ridwan, A. Y., & Santosa, B. (2015). Perencanaan Kebijakan Persediaan Untuk Meminimasi Total Biaya Persediaan dengan Pendekatan Metode Periodic Review (R,s,S) pada Part Aksesoris. Jurnal Rekayasa Sistem Industri.
Bahagia, S. N. (2006). Sistem Inventori. Bandung: ITB.
M. Zied Babai, A. A. (2010). On The Empirical Performance of (T,s,S) Heuristics. European Journal of Operational Research, 466-472.
Merdalina, Y., Ridwan, A. Y., & Santosa, B. (2016). Penentuan Kebijakan Persediaan Untuk Mengurangi Biaya Total Persediaan dengan Menggunakan Metode Periodic Review (R,s,S) System dan Periodic Review (R,S) System Terhadap Stock Pelumas pada PT. NYZ Ujungberung.
Pulungan, M. H., Sukardi, & Rofida, S. (2001). Pengendalian Persediaan Bahan dengan Model P dan Q Pada Kegiatan ProduksiCamilan Di Perusahaan Camilan Tradisional Malang. Jurnal Teknologi Pertanian, 58-73.
Sanni, S. S., & Chigbu, P. E. (2017). Optimal Replenishment Policy For Items With Three-Parameter Weibull Deterioration, Stock-Level Dependent Demand And Partial Backlogging. Yugoslav Journal of Operational Research, 1-15.
Setyaningsih, S., & Basri, M. H. (2013). Comparison Continuous and Periodic Review Policy. International Journal of Innovation, Management and Technology, Vol 2 No 4.
Silver, E., Pvke, D., & Peterson, R. (1998). Inventory Management and Production Planning and Scheduling. United States: John Wiley & Sons.
Tersine, R. J. (1994). Principle of Inventory and Materials Management. New Jersey: Prentice-Hall International, Inc .
Wang, F., & Xia, L. X. (2015). Evaluation and Selection of Periodic Inventory Review Policy for Irregular Demand: A Case Study. IEEE.
##submission.downloads##
Diterbitkan
Terbitan
Bagian
Lisensi
COPYRIGHT POLICY
The author(s) of an article published in the JISI UMJ retains ownership of the intellectual property rights in work (s).
PUBLISHING RIGHTS
The author(s) of an article published in the JISI UMJ have unrestricted publication rights. The authors give the JISI UMJ the right to publish the article and designate the Industrial of Engineering Universitas Muhammadiyah Jakarta Publishing as the original publisher of the article.
LICENSING POLICY
Journal of Industrial Engineering and Sciences is an open-access journal that follows the Creative Commons Non-Commercial 4.0 International License (CC BY-NC 4.0), which states that:
Under this license, the reusers must give appropriate credit, provide a link to the license, and indicate if changes were made. Users may do so in any reasonable manner, but not in any way that suggests the licensor endorses users or their use.
Please take the time to read the whole license agreement (https://creativecommons.org/licenses/by-nc/4.0/). As long as reusers follow the license conditions, the owner cannot withdraw these freedoms. The following components are included under this license:
Attribution: Users must provide appropriate attribution, including a link to the license, and indicate whether or not they made any modifications. Users are free to do so reasonably, but not in a manner that indicates the licensee approves of their usage.
NonCommercial: Users may not use the material for commercial purposes.