SISTEM PENANGGULANGAN KEGAGALAN PROTEKSI DI GARDU DISTRIBUSI TENAGA LISTRIK B 282
DOI:
https://doi.org/10.24853/jurtek.7.2.61-64Keywords:
Komunikasi Bergerak Seluler, Incoming Call, Forward Link, Trafik SelulerAbstract
Kegagalan sistem proteksi di gardu distribusi dan menjatuhkan penyulang merupakan kerugian untuk PLN karena kondisi pemadaman yang meluas. Oleh karena itu kegagalan sistem proteksi di gardu distribusi harus dianalisa, ditemukan penyebabnya, dan diambil langkah perbaikan agar tidak terulang kasus yang sama.Dengan menggunakan metode baru yaitu pemisahan CT dan relay sebagai fungsi proteksi dan pengukuran di harapkan mempunyai kinerja relay lebih baik dalam sitem proteksi.Hasil Test dan perhitungan yang dilakukan dengan pemisahan CT Proteksi dan pengukuran untuk Penggunaan Relay di CBOM Gardu Distribusi B 282 bekerja dengan baik dan perlu di lakukan pembaharuan sistem proteksi yang ada disemua gardu Distribusi.Downloads
References
Irfan, Affandi, 2009, Analisa setting relai arus lebih dan relai gangguan tanah gardu induk Cawang, Depok, Universitas Indonesia
Desrtra, Andhika, Pratama, 2012. Analisa kejenuhan CT terhadap rele arus lebih dan rele kordinasi pada switch gear 13.8 kV
Bob, Syaril, 2008. Modul diklat PT PLN (persero): Proteksi Penyulang Tegangan Menengah. Bogor
Gonen,Turan.1986.Electrical Power Distribution Sistem Engineering. New York : McGraw-Hill Book Company
Kadarisman, Pribadi, 2002, Kursus Proyeksi Pada Pembangkit
Rasidin Hardi, Rasiddin, 2005. Tugas Akhir: Setting Relai Proteksi Tegangan Menengah di Gardu Induk Cibabat Penyulang NT4A. Bandung: Politeknik Negeri Bandung
Downloads
Published
How to Cite
Issue
Section
License
COPYRIGHT POLICY
The author(s) of an article published in the Jurnal Teknologi retains ownership of the intellectual property rights in work (s).
PUBLISHING RIGHTS
The author(s) of an article published in the Jurnal Teknologi have unrestricted publication rights. The authors give the Jurnal Teknologi the right to publish the article and designate the Faculty of Engineering Universitas Muhammadiyah Jakarta Publishing as the original publisher of the article.
LICENSING POLICY
Journal of Mechanical Engineering and Sciences is an open-access journal that follows the Creative Commons Non-Commercial 4.0 International License (CC BY-NC 4.0), which states that:
Under this license, the reusers must give appropriate credit, provide a link to the license, and indicate if changes were made. Users may do so in any reasonable manner, but not in any way that suggests the licensor endorses users or their use.
Please take the time to read the whole license agreement (https://creativecommons.org/licenses/by-nc/4.0/). As long as reusers follow the license conditions, the owner cannot withdraw these freedoms. The following components are included under this license:
Attribution: Users must provide appropriate attribution, including a link to the license, and indicate whether or not they made any modifications. Users are free to do so reasonably, but not in a manner that indicates the licensee approves of their usage.
NonCommercial: Users may not use the material for commercial purposes.
